This system is great, but the thumb release needs to be beefed up. In pushing it down, it feels like it wants to bend off to the side. If AG can design a new thumb release to use with this holster it would be perfect and worth the full 100 bucks for the entire kit. I'm planning on using this system without the thumb release until this issue is ironed out. Hopefully AG takes note and goes back to the drawing board for the release. I'd buy one to install on the holster if this was done. Other than this, the entire system is great. Im comparing this holster to my safarilands, rapid force duty holsters and and blackhawk 7 series by the way. The rapid force is squared away. Give this kind of build quality attention to this thumb release for the shapeshift paddle holster!
It definitely not ready to wear,my screws backed out from part that attaches to the paddle....AT WORK...embarrassing check all screws make sure they tight don't know if it's my fault for not checking or problem with screws backing out...love the holster still💯
Damn thank you for that post, I just placed my order and I never would have thought on checking being that it takes them so long to make it. Would have thought everything would be 100 percent out the box
I ordered a of these but it didnt come with the alien paddle instead it came with the slide paddle. Thats not what ordered. The pic clearly showed and said paddle holster withe alien clip. So now what? Can u send me just alien head?
Yes, you can put different shells on the same backing. It's a part of the advantage of the ShapeShift line. Great question! Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
I own an Alien Gear Cloak-Tuck 3 and except for a problem with the the single bolt supports that allow the holster to pivot, I love it! It is only adds 1/4" - 3/8" to the width of the weapon. I was concerned about the modular system adding too much thickness to the weapon when being worn. This video exemplifies my concern, as you can see that the width of another gun can fit in between the weapon and the body! Is the IWB this thick? Alien Gear, please reply.
Hi Michael, your holster shouldn't be pivoting at all. Have you tried tightening the retention? Is it the shell that's doing this or the clips? Also, do you have the Cloak 3.0 or the 3.5? The IWB ShapeShift Shell is actually a little thinner than the Cloak Shell making the overall holster thinner. We look forward to hearing from you!
My paddle is crooked how in the hell do you adjust it? The whole alien face is crooked. It also said the M&P 9 2.0 wouldn’t fit in the original M&P 9 holster and it does...
It is supposed to be a little curved to help you grip it. If there are any issues, it does come with a 30 Day Test Drive policy so you can return it if you don't like it, and you can also reach out to customer service at (208) 215-2046 or email them at support@aliengearholsters.com for any questions about how to use it. Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
We apologize for the issues, and would love to help you get this corrected. If you contact us at (208) 215-2046 or chat live on our site we can fix this.
Hello! Unfortunately, at this time we don't offer this firearm for the ShapeShift. However, we're working on adding new Shift Shells! If you subscribe to our newsletter, it will keep you updated with all of the newest products we offer! :)
@@Aliengearholsters thank you for the reply! But from my understanding the m&p 22lr has the same dimensions as the m&p centrefire pistols so would i be right in saying that the your holster for the centrefire versions will work with the 22lr?
@@marius666 in that case they could just grab your gun and remove it from the holster. Unless they know you have this certain brand and know how it comes off I don't think they will even know it is removable.
Hey Alien Gear! Is this holster compatible with the width of my 5.11 belt? Edit* Referring to the attachment where the paddle is removed and your belt lides through. Worried about th belt width being an issue.
Depending on the type of belt you have, as long as it is no larger than 1.75" it should work just fine with our holster. You can also adjust the retention of the paddle to better fit it if all else fails.
@@dylanh.1530 Not a problem! It looks like most of their belts besides VTAC's are about 1.5", which should fit our holster just fine. Feel free to let us know if you have any further questions.
Thank you! Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
Why not? He works at Alien Gear! Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
Why is that? I just placed my order for owb, and it is my first time getting anything from this company. Can you explain why this is? Hope I didn’t make a bad choice.
@@albertbrooks2456 thanks for the reply. I had purchased an alien gear IWB holster like in 2016 (?) and wasn't so thrilled. I'm an old fashioned leather holster guy and use one for a 1911 when I open carry on occasion. Looking for a retention holster that doesn't break the bank. I have 4 Savoy Leather holsters and use on for daily IWB carry with a Shield 9mm. Gonna give this holster a try. Thanks again.
@@beeks919 oh yea I tried there iwb and I didn’t like it as well but they definitely make great owb holsters and I love this one because it’s a level 2. Can’t wait to get me a 1911 😞 but yea I’d definitely use a leather holster for iwb as well for the feel but I’d say definitely give this a try, I know they give you 30 days to try it and if you don’t like it you can send it back an get your money back as well. If you can let me know how you like it if you get it.
One of the most innovative companies out there!!!
Just got mine in Tuesday. My only concern is the quick thumb release is pretty clumsy.
Got mine yesterday its very fragile and week feeling. Very dissatisfied by the thumb release.
Hell I cant get mine to push in.... my g48 is stuck in limbo lol
This system is great, but the thumb release needs to be beefed up. In pushing it down, it feels like it wants to bend off to the side. If AG can design a new thumb release to use with this holster it would be perfect and worth the full 100 bucks for the entire kit.
I'm planning on using this system without the thumb release until this issue is ironed out. Hopefully AG takes note and goes back to the drawing board for the release. I'd buy one to install on the holster if this was done.
Other than this, the entire system is great.
Im comparing this holster to my safarilands, rapid force duty holsters and and blackhawk 7 series by the way.
The rapid force is squared away. Give this kind of build quality attention to this thumb release for the shapeshift paddle holster!
Agree...the thumb release is awful.
Maybe they’ve addressed this by now. I find out first hand soon enough.
It definitely not ready to wear,my screws backed out from part that attaches to the paddle....AT WORK...embarrassing check all screws make sure they tight don't know if it's my fault for not checking or problem with screws backing out...love the holster still💯
Damn thank you for that post, I just placed my order and I never would have thought on checking being that it takes them so long to make it. Would have thought everything would be 100 percent out the box
I can’t find the belt slide attachment on the website. Do they still make it?
Just ordered for my 1911 and Hellcat. Won't get it for a month though. 😕
whys it take forever for shipping?
They do make to order from what I was told after placing my order. Idk why they let you pay 30 bucks for next day air when next day air is impossible
So which is better, behind the pants or behind the belt?
I’ve always worn these behind my pants. Sometimes I wear a belt also.
I ordered a of these but it didnt come with the alien paddle instead it came with the slide paddle. Thats not what ordered. The pic clearly showed and said paddle holster withe alien clip. So now what? Can u send me just alien head?
Seems overly complicated causing the weapon to be far out from the body.
Are the surface mounts multi use? Such as between 2 different alien brand holsters like say 1 for a Springfield armory hellcat and canik tp9sf?
I don't know for sure but ... I would say yes.
I mean since you can buy different shells to swap between different holster options.
Yes, you can put different shells on the same backing. It's a part of the advantage of the ShapeShift line. Great question!
Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
Yes there awesome
I own an Alien Gear Cloak-Tuck 3 and except for a problem with the the single bolt supports that allow the holster to pivot, I love it! It is only adds 1/4" - 3/8" to the width of the weapon. I was concerned about the modular system adding too much thickness to the weapon when being worn. This video exemplifies my concern, as you can see that the width of another gun can fit in between the weapon and the body! Is the IWB this thick? Alien Gear, please reply.
Hi Michael, your holster shouldn't be pivoting at all. Have you tried tightening the retention? Is it the shell that's doing this or the clips? Also, do you have the Cloak 3.0 or the 3.5? The IWB ShapeShift Shell is actually a little thinner than the Cloak Shell making the overall holster thinner.
We look forward to hearing from you!
My paddle is crooked how in the hell do you adjust it? The whole alien face is crooked. It also said the M&P 9 2.0 wouldn’t fit in the original M&P 9 holster and it does...
It is supposed to be a little curved to help you grip it. If there are any issues, it does come with a 30 Day Test Drive policy so you can return it if you don't like it, and you can also reach out to customer service at (208) 215-2046 or email them at support@aliengearholsters.com for any questions about how to use it.
Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
Is it a level 2 holsters?
Yes! ShapeShift is a level 2 retention system in all of its carry configurations, except for the Pocket Carry and OWB Slide carry options.
Fir Remington RP 9 ?????
mine didnt come with the thumb release...
We apologize for the issues, and would love to help you get this corrected. If you contact us at (208) 215-2046 or chat live on our site we can fix this.
Do ye make this holster for the smith & wesson M&P .22lr pistol?
Hello! Unfortunately, at this time we don't offer this firearm for the ShapeShift. However, we're working on adding new Shift Shells! If you subscribe to our newsletter, it will keep you updated with all of the newest products we offer! :)
@@Aliengearholsters thank you for the reply! But from my understanding the m&p 22lr has the same dimensions as the m&p centrefire pistols so would i be right in saying that the your holster for the centrefire versions will work with the 22lr?
Do you make this for a gsg 1911 22lr?
How secure is that surface mount? Someone could easily full your entire holster off your belt.
Thank you for watching! There is a tab that should hook under the belt to help keep the holster in place. It also comes with a belt slide attachment.
@@Aliengearholsters what I meant was someone could press that button and remove your entire holster. Isn't that unsafe?
@@marius666 in that case they could just grab your gun and remove it from the holster. Unless they know you have this certain brand and know how it comes off I don't think they will even know it is removable.
Easiest way to remove it is to just slide it around toward the appendix area.
When is the 3rd drawing for the 1911!!!??? :)
Hi Kimberly, we will be selecting a winner today and will announce it during our Facebook Live Raffle at 3:00 PM PST! :)
@@Aliengearholsters ty!!
Hey Alien Gear!
Is this holster compatible with the width of my 5.11 belt?
Edit* Referring to the attachment where the paddle is removed and your belt lides through. Worried about th belt width being an issue.
Depending on the type of belt you have, as long as it is no larger than 1.75" it should work just fine with our holster. You can also adjust the retention of the paddle to better fit it if all else fails.
@@Aliengearholsters Ok I appreciate the help! Y'all prolly know 5.11 is slightly wider than a regular belt (or mine is anyways).
@@dylanh.1530 Not a problem! It looks like most of their belts besides VTAC's are about 1.5", which should fit our holster just fine. Feel free to let us know if you have any further questions.
I like the shape shift pack but my god the paddle is clunky
👍👍👍👍👍
Thank you!
Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
How the fuck do you put the belt slide on? That’s all I want
Are we supposed to believe this guy just low-key wears a battle shirt and khakis to work?
Why not? He works at Alien Gear!
Thank you for watching! If you would like to see videos similar to this, please subscribe to our channel, and check out our website to find your next holster. aliengearholsters.com/
Alien Gear Holsters hahaha great answer... and valid. It was just my smart ass attempt at humor.
Worst holster I’ve ever bought
Why is that? I just placed my order for owb, and it is my first time getting anything from this company. Can you explain why this is? Hope I didn’t make a bad choice.
@@albertbrooks2456 what is your opinion now, 1 year later?
@@beeks919 it’s a great holster. I have 2 of them for 2 different guns, I use one for work everyday.
@@albertbrooks2456 thanks for the reply. I had purchased an alien gear IWB holster like in 2016 (?) and wasn't so thrilled. I'm an old fashioned leather holster guy and use one for a 1911 when I open carry on occasion. Looking for a retention holster that doesn't break the bank. I have 4 Savoy Leather holsters and use on for daily IWB carry with a Shield 9mm. Gonna give this holster a try. Thanks again.
@@beeks919 oh yea I tried there iwb and I didn’t like it as well but they definitely make great owb holsters and I love this one because it’s a level 2. Can’t wait to get me a 1911 😞 but yea I’d definitely use a leather holster for iwb as well for the feel but I’d say definitely give this a try, I know they give you 30 days to try it and if you don’t like it you can send it back an get your money back as well. If you can let me know how you like it if you get it.