Great video, thanks. Fitting the plastic pins to the glass through the slot can be a real pain as often they push out the other side. Easier way - before re-fitting the inner steel panel, raise the glass and fit the two pins into it, centre them, secure with some glue if they are not a firm fit. When you have the steel panel loosely in place, lower the glass into the jaws of the plastic clip and push gently down- the pins will push the jaws apart and then click into their locating holes. Thanks for this tip to Sharky at Passat World.
plastic pin was a challenge but the way you do it 2 seconds and it was in thank you, there is a lot of people trying to upload videos how to fix cars but most of them are just guessing, i can tell that you do know.
![[ + CAR MECHANIC 24 + ]](http://yt3.ggpht.com/ytc/AIdro_kCQEuK63zm_GoW12rKcrZZTQE_uo452xT6dYQ4QIhzKFs=s48-c-k-c0x00ffffff-no-rj)
Thank you for the video. Got mine working again!
Great video, thanks.
Fitting the plastic pins to the glass through the slot can be a real pain as often they push out the other side.
Easier way - before re-fitting the inner steel panel, raise the glass and fit the two pins into it, centre them, secure with some glue if they are not a firm fit.
When you have the steel panel loosely in place, lower the glass into the jaws of the plastic clip and push gently down- the pins will push the jaws apart and then click into their locating holes. Thanks for this tip to Sharky at Passat World.
plastic pin was a challenge but the way you do it 2 seconds and it was in thank you, there is a lot of people trying to upload videos how to fix cars but most of them are just guessing, i can tell that you do know.
Hi...what kind of seal have you used ??
I have an 04 passat 1.8t Can you post the part number of that replacement part and/or where you got it from? Thanks
Were can I find the replacement part you used?
th-cam.com/video/RtDSCqH9H7E/w-d-xo.html
Not for amateurs. 😔
***** Yes