I just wanted to say great video picked up lots of tips from it. You are very good at explaining your steps. I appreciated that. I'm new to airbrushing. I just want to get good at something I enjoy doing.
I thought it was very well done ! Everybody does things their own way, so who is to say what way is right or wrong. I learnt from it, so whats not to like. Thanks !
great video, im a beginner, maybe got a month under me, so i have a lot of questions. first of all, in your opinion which is easier to spray, water based or solvent based?
coo vid sir,I'm new to airbrushing and just started trying to make stencils I'm trying to do a college football teal ,longhorns but don't seen to get it it falls apart and don't c it t it right,I know practi CX e will get it better .I also bought a burner and just trying to make a whole stencil if any tips be greatly apreciated
I as very new to this and was looking for good cheap plastic to cut permanent stencil with and low and behold walmart sells clear plastic that's prolly 25 mils thick its bout four foot long and only 3.99 a yard I thought that was great deal its also a soft pliable plastic so itll bend round curves and such or if you want a stiffer stencil I would just glue a backer to it .if you could contact me I have several questions I would like to ask bout air pressure and such but I like what I saw here ty for any and all help
So how would u do it if it was like a pinup girl with alit of different shading..would u cut like two different copies one of certain shading an other of other shading if it was light gray dark gray an black..thats just my guess im a tattoo artist an new to airbrushing like one month new..lol..thanx for sharing video..
hi thanks for waching and for you comment, sure i just try to show what i have done and how, alot of people just show off skills but when you are new to airbrushing you need to start from the basics, just having fun with something i enjoy doing, thanks again
hi thanks for your comment, yes you can do it that way i would punch a hole through the three copies also (at a corner or so) this way you can easely aline them and start from light to dark this will give you a better end result
hi thanks i would recommend a cheap ebay one that costs about 20 dollars as far as paints i try to use createx when i can but check out my other videos i explain id detail all products and costs thanks
+shakostarsun Depends what type of paints you use, but if it's any kind of automotive paint then not healthy at all; I'd definitely recommend using a respirator! (If you use water based automotive paints they are a lot safer tho)
I'm just doing a lot of reading and watching vids before I pick my equipment up so thanks for taking the time to make the vid.
what airbrush did you end up getting?
I just wanted to say great video picked up lots of tips from it. You are very good at explaining your steps. I appreciated that. I'm new to airbrushing. I just want to get good at something I enjoy doing.
great vid what type of airbrush gun and paint are you using? and where can it be purchased along with the approximate cost?
very good, and interesting, just gettin into it, and really lliked what you demonstrated
I thought it was very well done ! Everybody does things their own way, so who is to say what way is right or wrong. I learnt from it, so whats not to like. Thanks !
Pretty interesting vid. I plan on doing some smaller stencil work (less than an inch large), but I guess this should apply to that as well. Thanks! :)
what type/brand of airbrush is best for stencilling shirts?
Awesome. Now what if you are airbrushing on a car? What glue would you use? Or would you use pres stick?
hi i would use magnets on a car or mask out the disign
great video, im a beginner, maybe got a month under me, so i have a lot of questions. first of all, in your opinion which is easier to spray, water based or solvent based?
coo vid sir,I'm new to airbrushing and just started trying to make stencils I'm trying to do a college football teal ,longhorns but don't seen to get it it falls apart and don't c it t it right,I know practi CX e will get it better .I also bought a burner and just trying to make a whole stencil if any tips be greatly apreciated
+wanapaint hi you have tro bridge the stencil so it doesnt fall apart
Grate vid looking forward for more
thanks buddy
I as very new to this and was looking for good cheap plastic to cut permanent stencil with and low and behold walmart sells clear plastic that's prolly 25 mils thick its bout four foot long and only 3.99 a yard I thought that was great deal its also a soft pliable plastic so itll bend round curves and such or if you want a stiffer stencil I would just glue a backer to it .if you could contact me I have several questions I would like to ask bout air pressure and such but I like what I saw here ty for any and all help
So how would u do it if it was like a pinup girl with alit of different shading..would u cut like two different copies one of certain shading an other of other shading if it was light gray dark gray an black..thats just my guess im a tattoo artist an new to airbrushing like one month new..lol..thanx for sharing video..
Pretty cool, many thanks
thanks
cool video .
Great Job !
very good... tks for help
that looks awesome bro
Damn that's awesome.
hi thanks for waching and for you comment, sure i just try to show what i have done and how, alot of people just show off skills but when you are new to airbrushing you need to start from the basics, just having fun with something i enjoy doing, thanks again
Great tutorial
Brill stuff m8 ;)
hi thanks for your comment, yes you can do it that way i would punch a hole through the three copies also (at a corner or so) this way you can easely aline them and start from light to dark this will give you a better end result
How can I stick a paper on a freshly painted metal surface can you please tell me ???? I m stuck on a project...........
Shubham Jain hi sure if you use low tack transfer paper you will be fine
thanks for the kind words im far from where i want to be but thanks
Nice artists
thanks for the vid :)
good gob i lke it
hi thanks i would recommend a cheap ebay one that costs about 20 dollars as far as paints i try to use createx when i can but check out my other videos i explain id detail all products and costs thanks
thanks buddy will do
obrigado Rene
Thanks dude
thanks buddy
hey no probs thaks for the sub
another tip....buy a roll of lining paper (wall paper) its cheap and when you get to the end turn it round and use the other side. :(
thanks
How bad is it for your health to airbrush without wearing a respirator?
+shakostarsun Depends what type of paints you use, but if it's any kind of automotive paint then not healthy at all; I'd definitely recommend using a respirator! (If you use water based automotive paints they are a lot safer tho)
sounds like your pushing 35 to 40 psi through that gun lol. it could just be the room acoustics
I love dat shit ..UR SO AWSOME BRO
is that bounty?
+hellridersven could be
nice
thanks for the support
Good ink
Long Beard thanks bro
hi new post i got my air brush gun and line and a tank in now am try to put together wish me luck.
Upcomeing artists cool this was just an exercise but thumbs up
nice i like the exercise keep up the wound full work up bro OK i keep watch.
.
Upcomeing artists thanks bro
lol
you should practice some more before posting tutorials. my two cents.
He having a go ,,U do better