Whats the name of the carpet spray you used? The boat looks great. I'm about to start replacing the carpet in my xpress bass boat. Looking at ways to keep the carpet on the sides and underneath some of the console
How is the foam holding up on the corners of your lids? I noticed you rolled it around from top to bottom. Did you pin it on the bottom or just let the adhesive do it’s job?
I’m installing this foam in my boat now. TIP: a carpet knife works a lot better than a regular utility knife cutting through this foam. Stick strength is fantastic on the back of this product.😊😊😊😊
How many sheets did it take to do both decks and the floor? I’m remodeling a tracker and am thinking about doing the walls and sides of the boat a different color foam than the decks and floor.
Good to know! We used the Purple Power in this video… just put it in an old detail spray bottle as those bigger jugs make it harder. Only thing I’ve noticed is it streaks easy.
About to do this to my bass tracker and thought to my self, "there has to be a video out there of someone else doing this"... and found your video!! The details and honest opinions have saved me from my own ignorance 🙌 How has it held up in the elements?
@@Morganchip100 it’s been great for the hot florida weather. It stays outside under a cover and might need a refresh but honestly I learned a lot and it’s seriously a tank! Go for it , nothing like building and using the boat for what’s its intended for :)
Awesome job 👍... Boat looks really nice.. I just bought one a few weeks ago... the guy just replaced the carpet.. I'm going to get seat's like yours.. Really sharp!!
Not bad at all! Honestly it definitely has its pros/cons (like searching for a hook or lure) but changes the overall look and feels great on your feet.
Know this is late but yamaha ring free lower unit in a barrel pour all 16oz in 6gal,normal oil mix,u will be astounded how much oil grease and sludge on water after idling that through it all afternoon.u will be impressed
Hey, I recently got a boat very similar to this (2004 bass tracker pt 185). I’m looking to do a very similar design with eva foam, if you don’t mind either replying to this comment or maybe even making a video about how well it’s holding up and anything that you would’ve done differently or would recommend for someone like me going into a project like this. Thanks!
@@Flipzco Awesome, weird question but does your bilge pump work? If so what switch on the dash turns it on and off? Mine doesn’t seem to be working and I’m having a hard time determining what’s wrong with it (fuse, wires, switch, etc)
Bass Trackers are some junk. But that doesnt stop me from being a new subscriber and watching this video. Keep up the hard work and dedication to put together these videos for us. You have one awesome dad that helps u with such things. Be thankful that u have him and that yall can do these types of things together. Def cherish every bit of time spent together because tomorrow isnt promised. Anyways keep up the great content. And im looking forward to more videos like this one. Much love to ya from Maryland❤❤❤
I would like to know your definition of junk. It seems that a lot of those boats are sold. I have one that is 39 years old. It's still in good serviceable condition. I would say that's a pretty good track record. But, I suppose that the thousands of people who use them know less than you do.
I'm extremely interested in the side carpet and how that works out for you. I am going to do this to my boat deck next spring and am looking at which foam to use. Nice job, it looks really nice.
Thank you! Light with the coats.. but once it’s even you literally save so much money! I would only keep it on the cat walls as flooring it’ll feel a little rough
@@Flipzco Nice. The holeshot will be ridiculous fast and you will keep the same top end. I had a 2005 185 for 10 years loved it and miss it. An Orca cooler fits front deck space perfect too.
Yoooo where the bass at ???
sheesh they sleeping bro lol
Love the boat but man those cars in your dive way 😍😍😍😍 I’m in love!!
Hahaha thanks bro
Those rims on the trailer make a world of difference in the way the whole rig looks
Facebook Marketplace - $100 can not beat it! haha
i might be wierd but i liked the steel rims haha
hyped for boat stuff
Its still Drifting, just a different kind of driftin... hope all is well bro!
What are dad's for haha. Can't wait for my sons to come home one day with a beat up project truck or boat haha
Just good vibes and memories!
What spray did you use on the bottom of the boat to make it white again and nice cars
Carpet Spray! You can go to autozone they have it!
@@Flipzco on the metal
@@prestonkaiser royal purple aluminum cleaner
What is the aluminum cleaner you are using?
Whats the name of the carpet spray you used? The boat looks great. I'm about to start replacing the carpet in my xpress bass boat. Looking at ways to keep the carpet on the sides and underneath some of the console
Carpet Spray from Autozone
Works Great! Dupli-Color is the Brand
How is the foam holding up on the corners of your lids? I noticed you rolled it around from top to bottom. Did you pin it on the bottom or just let the adhesive do it’s job?
So far so good! I did use 3M adhesive for the corners and let it sit with weights overnight
I’m installing this foam in my boat now. TIP: a carpet knife works a lot better than a regular utility knife cutting through this foam. Stick strength is fantastic on the back of this product.😊😊😊😊
How’s the foam held up?
So far so good! Only the spots I didnt prep very well peeled up immediately but after moving to florida the sun bakes it and holds up very well.
I would be interested to know what the top end speed is with the 90 Merc on this boat
On a good day - Flat Water 32mph with 2 people on it!
How is the foam holding up?
Making an update video this weekend!
On the hunt for a project Bass Tracker because of this video! Love seeing the cars in all the shots as well!
Thanks so much bro!
First time taking on a project like this so hopefully I can add more cool things to it
@@Flipzco That lighting video was killer! keep killing it man!
How many sheets did it take to do both decks and the floor? I’m remodeling a tracker and am thinking about doing the walls and sides of the boat a different color foam than the decks and floor.
6 Sheets - with maybe 2ft leftover
@@Flipzco sweet. Thanks!
Another good aluminum cleaner is purple power aluminum brighter.
Good to know! We used the Purple Power in this video… just put it in an old detail spray bottle as those bigger jugs make it harder. Only thing I’ve noticed is it streaks easy.
Whats the name of the flooring you used and where can i get it?
HJ DECK & Amazon
What kind of cleaner did you use on the outside of the boat?
I've found that ants love to crawl into the tell tale and clog it up. Some strong weedeater strings jam it in there and it'll clear it out.
That’s an awesome idea! Going to try that out.
Is that an fd, and r32?
Yes and a supra in the back
Sick dude! Boat is looking sweeettttttt
Thanks buddy! Gotta get the crew fishing once i get it on the water.
Came out so clean dawg! We need to get Chris out for a boys trip asap
LETS GO BRO! - Chris always down, shred tires than rip lips? sounds like a dope time.
A private day then head over to manasquan reservoir 🤣
@@jessep6683 think the vette can tow the boat?
Yoooo we should do that for a video 🤣🤣
About to do this to my bass tracker and thought to my self, "there has to be a video out there of someone else doing this"... and found your video!! The details and honest opinions have saved me from my own ignorance 🙌 How has it held up in the elements?
@@Morganchip100 it’s been great for the hot florida weather. It stays outside under a cover and might need a refresh but honestly I learned a lot and it’s seriously a tank! Go for it , nothing like building and using the boat for what’s its intended for :)
@@Flipzco thanks for the encouragement!! Hoping to tackle it soon and get it sold. Looking to jump to a skiff next
@@Morganchip100 that’s what I did, jumped into a mako 18LTS… so much fun!
How’s the Eva foam holding up?
Great! Shrunk from the heat in some areas but still holding well. Update video coming soon!
Nice work. Looking good.
Aye man, I’ve got a Similar boat to you, I’m looking at getting some of that EVA foam, did you just get one roll? If so what size?
I linked it in description - I needed 4 rolls out of the 6 I bought
Nice job. How is that foam holding out ? is there any lifting ?
Not bad! It did shrink a little from the florida heat. But simply still covers everything fine
@@Flipzco has the foam tore and it’s wearing well? I’m in Az and thinking of doing it but don’t want to waste my money if it sucks.
How many sheets of the foam did you need?
6 pieces - but to do catwalks and seat area I’d say 8 pieces total
Dads rule. Watch him mostly listen to him
❤ hopefully can teach my soon my pops teachings
You got to get a trolling motor it’s a game changer
Got a motorguide xi5 :) your right it is a game changer!
Update on the supra?
Coming Soon
Did you see the eva foam before you bought it? Did you choose the ugly one on purpose?
right side gunnel and thru the middle under floor of hull
Awesome job 👍... Boat looks really nice.. I just bought one a few weeks ago... the guy just replaced the carpet.. I'm going to get seat's like yours.. Really sharp!!
Thank you so much! Very happy with how it’s coming along. Look forward to posting another video soon’
Awesome job!!
Thank you! Not done yet but very happy how it’s coming along. Appreciate the support
@@Flipzco I got that stuff saved on my list for When the day comes the carpet needs replacing in my Pro160..
@@fishingwithjimmy9919 it’s defiiitely a great replacement for sure
How is the sun glare off the white?
Not bad at all! Honestly it definitely has its pros/cons (like searching for a hook or lure) but changes the overall look and feels great on your feet.
Know this is late but yamaha ring free lower unit in a barrel pour all 16oz in 6gal,normal oil mix,u will be astounded how much oil grease and sludge on water after idling that through it all afternoon.u will be impressed
thanks bro!
Really enjoy the content boat Is looking good just saw on for sale think it was around same price. Was thinking about buying it
Thank you so much! Definitely a change in content but i enjoyed every moment. Definitely suggest it! It's something everyone should experience!
Damn that rx7 thooo😮
Shit I hadn’t even seen the skyline
Hey, I recently got a boat very similar to this (2004 bass tracker pt 185). I’m looking to do a very similar design with eva foam, if you don’t mind either replying to this comment or maybe even making a video about how well it’s holding up and anything that you would’ve done differently or would recommend for someone like me going into a project like this. Thanks!
Thanks for the support and comment looking to post a video soon regarding how it held up
@@Flipzco Awesome, weird question but does your bilge pump work? If so what switch on the dash turns it on and off? Mine doesn’t seem to be working and I’m having a hard time determining what’s wrong with it (fuse, wires, switch, etc)
When we going fishing?!
Next wknd. Let’s roll bud! Swim baits & 5lb only
I gotta get in on this trip as well, slangin’ them god damn Marley glides
Bass Trackers are some junk. But that doesnt stop me from being a new subscriber and watching this video. Keep up the hard work and dedication to put together these videos for us. You have one awesome dad that helps u with such things. Be thankful that u have him and that yall can do these types of things together. Def cherish every bit of time spent together because tomorrow isnt promised. Anyways keep up the great content. And im looking forward to more videos like this one. Much love to ya from Maryland❤❤❤
Thank you so much dude! Look forward to seeing your comments seriously made my day! More content to come :]
I would like to know your definition of junk. It seems that a lot of those boats are sold. I have one that is 39 years old. It's still in good serviceable condition. I would say that's a pretty good track record. But, I suppose that the thousands of people who use them know less than you do.
I'm extremely interested in the side carpet and how that works out for you. I am going to do this to my boat deck next spring and am looking at which foam to use. Nice job, it looks really nice.
Thank you! Light with the coats.. but once it’s even you literally save so much money! I would only keep it on the cat walls as flooring it’ll feel a little rough
멋지네요
Very nice video
Thank you!
Get a mercury spitfire 4blade Propeller!
On the list for sure! I want to get some of the hull imperfections squared with - than we can get something in motion for sure
@@Flipzco Nice. The holeshot will be ridiculous fast and you will keep the same top end. I had a 2005 185 for 10 years loved it and miss it.
An Orca cooler fits front deck space perfect too.
Goo gone with a scrapper and an osecillating multi tool with blade
That motor would have started and idled the first time if you had trimmed the motor down level
@@Afewnumbersandletters needed a carb rebuild and re-jet it was clogged.
how bout those cars in the back ! wtf ! just got my first aluminum gregor and came aross this video but i love the cars more lol nice work on this
thanks haha congrats on the boat!
So we just gonna ignore the gtr and rx7 in the driveway?
Check the channel out - We have a few videos with the car content!
Rx7, r33, corvette… man you’re making videos on the wrong stuff 😂
I make videos with that as well. Check out the channel :)
Almost fainted when I saw the driveway…lol💪🏾
I got the same foam, wait until next year and you run your finger over it and it starts flaking. No lie.
That would be 6500 minimum where In Arkansas
Definitely want to pour more money into it! Need to fix up a leak i found in the Keel - Once i get that squared ill have an update video!
"nice boat....did i just see a skyline?" - everyone
lmao
replace thqat water pump impeller. it will fail first real run
Yup already did :]
Garcia Betty Allen Kimberly Rodriguez Patricia