Fujimi: Ferrari 599 GTB Fiorano Part 1

Links to the products i use are bellow
I Was not paid to say or do anything. These are my honest opinions uncensored.
Want to support this channel, why not become a patron! And also get your chance at winning one of my finished builds:
www.patreon.com/thescalemodel...
Visit my webshop(for euopean vieuwers: www.thescalemodeler.com
Or my Amazon Shop for US vieuwers:
www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
www.thescalemodeler.com/brand...
My airbrushes and setup:
1BAR(20PSI) of air pressure through the gun.
amzn.to/2xGv8JT
amzn.to/2xHccdW
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
amzn.to/2yp5T25
amzn.to/2J8l1n1
The booth i made myself:
• How To: Build a Spray ...
Zero paints store locator:
www.zero-paints.com/Dealer_Lis...
Grey Primer: www.thescalemodeler.com/produ...
Clear: www.thescalemodeler.com/produ...
Colors: www.thescalemodeler.com/categ...
General Tools: amzn.to/2xGdDOB
Sanding sticks:
amzn.to/2JDydEt
amzn.to/2l1FWOV
Tape:
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
Tape with plastic sheet: amzn.to/2hIy82f
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Cutter: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Clearparts glue: amzn.to/2EQMTyt
CA Gleu: amzn.to/2zb0jhg
Plastic Cement: amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves:amzn.to/2ypuTqd
Tweezer: amzn.to/2hIxj9F
Brushes: amzn.to/2xG77r3
Decals Solutions:
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers: amzn.to/2zptYoa
amzn.to/2z8WREd amzn.to/2zFEgjS
Sanding sponges: amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders: amzn.to/2ypbjtT
Panelline accent color: amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice: amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
Camera Gear:
GoPro: amzn.to/2DDfRgz
Head Strap: amzn.to/2DHiiio
Links
www.thescalemodeler.com/brand...
plamoz.com/
www.scalemotorsport.com/
/ yellowhouseclub
www.uscp-ua.com
Check out Scaled world and get your builds featured!
scaledworld.net/
/ scaledworld
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds,unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at [e-mail]
Also don't forget to like us on Facebook for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by TH-cam Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

[@keannemarkespinosa329]

That brown goes so well with that 599

[@picax8398]

Can't wait to see the results of this build! Love the videos tom!

[@ggj1987]

This colour is a real surprise! Looking forward to the end result!

[@jth1987leb]

Great color

[@Advection357]

I like the painting part :3

[@borisvbrknex]

Looked better without the clearcoat, I like the matte colour

[@nikifalcon]

RealBorisBoef BM's if you're a ricer then you like matte finishes

[@BennyCFD]

Man.... you are such a prolific builder. Can you make a video of your collection.
Thanks

[@racnc1]

BennyCFD if you go through his videos file you will see the videos of his collection..

[@christosaugustis9450]

Yes but he has made a lot of models since then

[@michaelkeogh8454]

A color James May might choose.

[@nikifalcon]

Michael Keogh because it's a good color if done right

[@supacar5]

Cool color. Odd, but cool!

[@crossbowhunter9118]

how can i tell wat lines in the modle needs to be their and which cant be their for example mold lines

[@IILego_BatmanII]

A Brown Ferrari, that's interesting, nice choice.

[@oharrellcoins5553]

That was a nice ass paint job bra. What kind of clear is that.?

[@rajaramsivasankar6864]

Do you keep the body in the extractor with it switched on when you let it sit and dry between coats to prevent dust settling on the wet primer/paint?

[@TheScalemodelingChannel]

Sometimes, yes. Depends if i have more parts to paint. Then i just set it asside

[@DecemYang]

Why he is processes marked places? and with what?

[@billy6487]

I know you left links to spray booths before but, if I remember yours you sort of custom built. When you are painting are you in a garage, patio Etc... My biggest concern is dust during and after spraying. What have you done to help reduce dust when you spray ?

[@TheScalemodelingChannel]

I spray in the attic with the washer and dryer. So prettymuch nothing at all as far as dust prevention for the room

[@damianezequiel9618]

Please!, do the Pagani Huayra or Pagani Zonda

[@fabinhominiaturas6746]

muito bom ;

[@brk8841]

Hello. Which noozle do you use ? I will buy the airbrush but, should i buy it solo with only 0.4 noozle or with 0.2 together as 2 in 1 package? Which one do you prefer?

[@TheScalemodelingChannel]

0,4

[@robertovisentin1112]

Do you thin the primer? I must add some tamiya lacquer thinner to get a nice finish. Like 1:1. Thanks

[@TheScalemodelingChannel]

Nope. Zero is pre thinned

[@robertovisentin1112]

Lucky you. Mine went down like sandpaper @20psi. Thanks!

[@fetthunderdome]

Which pressure do you spray diamond finish clear coat at?

[@TheScalemodelingChannel]

Its all in the description

[@bR44Nor]

If you would remove the paint (for re-painting). How you would do it? Sanding paper?

[@TheScalemodelingChannel]

Isopropyl alcohol(ipa) and then sandpaper once most of the paint has been removed

[@MAN394631]

i would use Dowanol, thats a great product, available in e-bay

[@bR44Nor]

thanks a lot, guys

[@crossbowhunter9118]

I got a question I am doing a old car model and when I paint any of my models the paint when applied is water like I am useing the water souble paint not the other stuff I am useing a brush to apply it what does that mean it is like water like paint when applied one brush stroke u can still see the white of the plastic model does that mean it is not shaken enough or is it cuz I don’t prime my parts plz help

[@TheScalemodelingChannel]

The paint is not thick enough. Or needs more then 1 coat to cover

[@crossbowhunter9118]

The Scalemodeling Channel could it be it not mixed well how do u like your air brushes which one do u recommend over the other I am thinking of getting one would that mean I would have to buy different paint or wat which brand do u recommend

[@christosaugustis9450]

That is a very unusual color for a FERRARI and ia like it😁😂

[@ichbinverloren31]

i want to make models but which model should i start with?

[@TheScalemodelingChannel]

Wichever one you want bud. Thats the beaty of it

[@MAN394631]

A really nice model, but i would use always original paint from Ferrari, Zero-Paint will mixing it for you

[@andrewscott2090]

Can you use nail polish for paint????

[@TheScalemodelingChannel]

I have heard you can. Its not ideal though as it stays soft ish

[@andrewscott2090]

The Scalemodeling Channel thank you for the information

[@crossbowhunter9118]

Why do u want to get rid of the mold lines just wo

[@TheScalemodelingChannel]

Cause they are not there on the actual car and look ugly

[@klonik79]

interesting choice of color, but even with that nice gloss it makes model look dull, almost featureless. From PooWagens color range would not be something like lambos oranges or greens more appealing and lively? BTW one 458 aound here runs in high gloss Smurf Blue livery :D

[@JOAO-jb8se]

Make a fujimi honda crx

[@TheScalemodelingChannel]

This is a joke, right?