Audi TT Mk1 - How to remove the front bumper - A beginner's guide

A DIY step by step tutorial for beginnners on how to remove the front bumper on an Audi TT Mk1. Mine has a coolant leak so I want to take a look at the condition of the radiator.
I was surprised to find that the headlight washers had also been disconnected by a previous owner!
You need the following tools for this job:
Axle Stands
Trolley Jack
T25 Torx Bit
T30 Torx Bit
10mm Socket and extension bar
Screwdrivers
Happy to answer any questions below and please let me know how you get on with the job!

[@edpagan2103]

Thank you Andy. Your videos help me so much. I need to change my condenser.
Lets go Bolts!!!!!!!!

[@andycharger]

Thanks for the feedback Ed! I think I need to do mine also. Go Bolts!

[@lugge1540]

Hello Andycharger, great job explained very well.
greetings from Germany

[@andycharger]

Hi Lugge! Thank you for your comments. I hope you found it useful. Please let me know if you have any other jobs you want me to take a look at.

[@Freedom4PalestineEndZioNazism]

Brilliant tutorial! 👌🏾

[@andycharger]

Hi and thanks for your feedback as always. I hope it was detailed enough! Still lots to do on the car and share with you all!

[@bobjarvis1787]

Very clear instructional video 😊. Thanks

[@andycharger]

Thank you very much for the kind words Bob! I am working my way through the various jobs I need to do and documenting them all on my channel. Which TT do you own?

[@bobjarvis1787]

@@andycharger 225 Bam 2002 Avus silver with Anis yellow leather. It’s standard just working my way through doing maintenance. For example new front to rear brake pipes are next up, then a refurbished rear sub frame. Keep up the good work with your channel🙂

[@TM-on4jl]

Excellant Andy...Again....

[@andycharger]

Thank you very much!

[@paulfletcher929]

Excellent videos..

[@andycharger]

Thanks Paul! Much appreciated! More to come on a weekly basis! ;)

[@Al-qv5vs]

😉nice one!

[@andycharger]

Thanks Al! Appreciate the feedback!

[@alexprice3406]

Is this the same process for the 3.2 mk1 version m8?

[@andycharger]

Yes buddy. This is good for both 1.8T and 3.2! 👍

[@romeokaranovic851]

Do you have an answer i nosed my bumper into a hole and i god leak but dont know what it is

[@andycharger]

Radiator is right behind the bumper. Perhaps you have punctured it?

[@romeokaranovic851]

@@andycharger thank you verry much

[@busker_boy_c2845]

My 10mm dont fit

[@andycharger]

Definitely a 10. It’s why they all vanish from our toolboxes. Check they are not rounded off or rusted. Give them a squirt with WD or penetrating fluid to get that loose stuff off. I hope you get it sorted 👍

[@busker_boy_c2845]

@@andycharger its to wide to fit round the intercooler i got a deep one from halfords as well on 1/4 drive and it still doesnt get round the intercooler 🤣