Thank you so much for your help. Its pretty straight forward, but I learned something new from your video. By putting solder on the tip it won't get the board hot. And fry your circuit.
What are the red and blue cables to the right. I have red and black cables there. I think I destroyed them while taking the battery off. Seems to be cables to the speaker.
I need some help, I have an iPod 4th generation. The the battery was it staying charged. I went ahead and ordered a new battery and the tool kit. The installation went pretty smoothly installing the new battery, But I went to plug it in and its not charging the battery. The unit dose turn on and works fine. What is the problem, any suggestions would be appreciated. Thank you
The problem is probably not the battery. If people do not eject the ipod via the USB port in their computer then the hard drive indexing system becomes corrupted. The hdd then spends it's time on and searching for file fragments that it can't locate. How to fix. Use the ipod sync and charge cable and plug it into a Windows based computer. The computer will recognize the ipod and download its drivers. Then when it is complete go to the drive assigned to the plugged in ipod and open it. If it is corrupted it will report that the file system is damaged and ask if an attempt at auto repairing can be made. Say yes. Once it reports it was successful you can open the drive and view the files. Then EJECT the drive the correct way and don't just pull out the USB cable. Once that is done then your ipod should recharge and hold charge normally. Let me know if this works for you.
does a black spot in the upper right screen indicate battery needs change???... is there any company you recommend for doing the battery change service???.... what is a fair price to replace a battery???
Hello RockIT Tech, I see that you do or did battery replacement for iPod Touch 4 Gen. Are you still doing this, if so how can I reach you? I live in Alexandria, VA, do you accept items by mail?
So i was taking to old battery out and when i try taking out the middle piece i took the middle section to charge the battery out of the mother board. Positive and negative were okay but how do i fix it. Read on line that you can by pass it by wiring it to a test point but there small and have no clue. What can i do??
+Jade Strickland If there is no solder clean with 99.9% alcohol and a toothbrush. Then take flux and apply solder (tinning) the existing pad. However is there no solder or has the trace pad been ripped from the board? If this is the case you will need to jumper the point.
Isn't this caused by unusual charging habits? I've always heard that you should run the battery completely down before charging it, or else the battery will be ruined over time. Is this true?
Had a local phone repair shop do this for our Ipod Touch 4th Generation cuz it wouldn't hold a charge. And it still won't hold a charge! Did not solve the problem. Now what? Wasted $50 for this battery?
it could be one of two things either it needs a new battery and that one is bad or it needs an IC replacement replacement for the charging. if it does need the IC chip I would go back and let them know that what they did not fix the issue and at the least credit that $50 that you paid towards the chip repair
Title should be “Battery replacement” not battery repair. Big difference dude.
Thank you so much for your help. Its pretty straight forward, but I learned something new from your video. By putting solder on the tip it won't get the board hot. And fry your circuit.
How did you remove the cover from the I-Pod?
who make the soldering iron that you are using
Did you apply soilder to the iron or the board ?
What are the red and blue cables to the right. I have red and black cables there. I think I destroyed them while taking the battery off. Seems to be cables to the speaker.
I need some help, I have an iPod 4th generation. The the battery was it staying charged. I went ahead and ordered a new battery and the tool kit. The installation went pretty smoothly installing the new battery, But I went to plug it in and its not charging the battery. The unit dose turn on and works fine. What is the problem, any suggestions would be appreciated. Thank you
The problem is probably not the battery. If people do not eject the ipod via the USB port in their computer then the hard drive indexing system becomes corrupted. The hdd then spends it's time on and searching for file fragments that it can't locate. How to fix. Use the ipod sync and charge cable and plug it into a Windows based computer. The computer will recognize the ipod and download its drivers. Then when it is complete go to the drive assigned to the plugged in ipod and open it. If it is corrupted it will report that the file system is damaged and ask if an attempt at auto repairing can be made. Say yes. Once it reports it was successful you can open the drive and view the files. Then EJECT the drive the correct way and don't just pull out the USB cable. Once that is done then your ipod should recharge and hold charge normally. Let me know if this works for you.
where can i buy the white thing used before using the solder?
does a black spot in the upper right screen indicate battery needs change???... is there any company you recommend for doing the battery change service???.... what is a fair price to replace a battery???
what is the exact mg chemical flux you're using? is the 835 liquid rosin flux ok to use for this?
Leida Ortiz Here check out the MG Chemicals flux that we use. goo.gl/lNxS9K
after you change the battery it is not easy ro lowbat?
Hello RockIT Tech, I see that you do or did battery replacement for iPod Touch 4 Gen. Are you still doing this, if so how can I reach you? I live in Alexandria, VA, do you accept items by mail?
Excuse me, but If I shipped to you from Washington how long would it take for you to fix it and send it back?
TheMrCookie Lord We can fix and ship back generally within 24 hours.
So i was taking to old battery out and when i try taking out the middle piece i took the middle section to charge the battery out of the mother board. Positive and negative were okay but how do i fix it. Read on line that you can by pass it by wiring it to a test point but there small and have no clue. What can i do??
The battery you removed had a part number that was different than the battery you installed. Why is that? 616 550 vs 616 553.
Is it possible to have someone at a store do this replacement? And if so how much would it cost , if you know.
+Ulquiorras Lover.564 We do this at our store in Fredericksburg for $59.99
thanks I didnt know you could replace the battery in these
When you put a charger in it and you test the batteries connection with a voltmeter do you get anything?
What happens if you damage the copper film ?
What is the stuff you put on the connectors?
We put flux on the connectors to make the solder liquify easy.
Where is the middle connector of the battery and pcb for?
what happens if there is no solder left on the contacts?
+Jade Strickland If there is no solder clean with 99.9% alcohol and a toothbrush. Then take flux and apply solder (tinning) the existing pad. However is there no solder or has the trace pad been ripped from the board? If this is the case you will need to jumper the point.
Can i use a big tip please response
my i pod touch wont hold a charge. it gets low at a minute
My ipod touch wouldn't turn on at all and even before that it was overheating. Is it because the battery?
Has it ever seen any water damage?
No.
Hard to tell at this point. You can always send it in for a diagnostics.
RockIT Repairs Inc. How much will you charge to solder 3 ipod. 4Th generation and change screen
how much do u want to change ipod battery
$59.99
Isn't this caused by unusual charging habits? I've always heard that you should run the battery completely down before charging it, or else the battery will be ruined over time. Is this true?
With a battery if new don't charge it but let it run down to about 10-13% and then charge it back up.
Ok, thanks for the info. I'm asking for a new iPod for X-Mas and I want to keep the battery from getting ruined lol.
Where can I purchase a new battery?
Ashley .Nicole ebay
How to get screen off and where to get a battery?:)
Dan poo To remove the screen just heat and remove slowly. The battery can be bought just about anywhere online. Do a google search.
Had a local phone repair shop do this for our Ipod Touch 4th Generation cuz it wouldn't hold a charge. And it still won't hold a charge! Did not solve the problem. Now what? Wasted $50 for this battery?
it could be one of two things either it needs a new battery and that one is bad or it needs an IC replacement replacement for the charging. if it does need the IC chip I would go back and let them know that what they did not fix the issue and at the least credit that $50 that you paid towards the chip repair
Nice👌
Thanks
I will check
My iPod to
What's your question my friend. I'll see if I can help.
my Iphone is overheating and drains fast
Check the U2 ic chip
+RockIT Tech if that so happens to be the problem how can I get a hold of a U2 ci chip or can I get that fix?
wow gooodddd