Should the Hour Hand fit flush with shoulder on Hour wheel or should it be press slightly below the shoulder...Same for Minute hand...? Thanks for the video.
I need to have a SeikoVD53 movement in my Invicta. Has a date wheel and 3 chrono needles. How much more complicated is that for a jeweller. Do I have to expect to be charged an arm and a leg?
Two questions if you don't mind Peter - Where's the movement number to identify these small Quartz Movements? And how do you know how to order a case fitting ring for a particular movement and case? Many thanks!
If you look very closely on the movement, you may need some magnification, most watches will be marked with both the manufacturers name and model. You can order a replacement with that info. If you are replacing the movement with one that is smaller or larger, or have lost the original holding ring, you will need to measure the dimensions of the movement and the case in millimeters to order a new ring. I simply 3D print new rings if I need them.
Nice. I have a quartz seiko that I just got from ebay. The crown/stem are unwieldy and possibly the mechanism is defective. Where do I go to find the replacement mechanism and stem? (Seiko SX V701-5J00) Thanks.
I successfully reached the step to taking off the watch hands. They have sprung off but I can't seem to get them to release completely from the stem. Any tips?
Hi Sir, I have a Vintage Timex Mickey Mouse electric watch, running good before but now working intermittently, is it possible to just replace it with modern quartz movement for reliability? Any movement you can recommend? Thank you.
Several considerations need to be met. A movement that fits the watch, can work with your hands and that the dial can be attached. Without seeing it I can’t say. You can send me pics via Facebook with the link from my channel page.
Should the Hour Hand fit flush with shoulder on Hour wheel or should it be press slightly below the shoulder...Same for Minute hand...? Thanks for the video.
Great video. Tanks !
Why did you set up the seconds hand so the that the minute hand will be 30 seconds out of sync every time the second hand reaches 12 o'clock?
Nao fica. O ajuste de horas é manual vc corrige facil.
I need to have a SeikoVD53 movement in my Invicta. Has a date wheel and 3 chrono needles. How much more complicated is that for a jeweller. Do I have to expect to be charged an arm and a leg?
Two questions if you don't mind Peter - Where's the movement number to identify these small Quartz Movements? And how do you know how to order a case fitting ring for a particular movement and case? Many thanks!
If you look very closely on the movement, you may need some magnification, most watches will be marked with both the manufacturers name and model. You can order a replacement with that info. If you are replacing the movement with one that is smaller or larger, or have lost the original holding ring, you will need to measure the dimensions of the movement and the case in millimeters to order a new ring. I simply 3D print new rings if I need them.
Nice. I have a quartz seiko that I just got from ebay. The crown/stem are unwieldy and possibly the mechanism is defective. Where do I go to find the replacement mechanism and stem? (Seiko SX V701-5J00) Thanks.
Be careful where you get it fixed, a less-than-honest jeweler will steal your genuine Seiko movement and put a cheap Chinese movement in its place.
You didn't include taking off the case back, which can be the most troublesome and time-consuming part.
You need a knife, you probably tried using you fingers...😀
I successfully reached the step to taking off the watch hands. They have sprung off but I can't seem to get them to release completely from the stem. Any tips?
Sounds like there may be a second hand involved. You will still need to Baer carefully pry them up and off.
If you are swapping the movement, the only thing you really have to worry about is not damaging the dial.
Blair watch project, I got dizzy.
Al35 movement
Hi Sir, I have a Vintage Timex Mickey Mouse electric watch, running good before but now working intermittently, is it possible to just replace it with modern quartz movement for reliability? Any movement you can recommend? Thank you.
Several considerations need to be met. A movement that fits the watch, can work with your hands and that the dial can be attached. Without seeing it I can’t say. You can send me pics via Facebook with the link from my channel page.
@@watchesandjewelry thank you sir for the response😊
Fast
Jay Shri Krishna💕🙏
Man, your video is nice, but my eyes hurt from this off-centered picture!