I like it, very similar to the way I built mine. for my doors I built the steel frame to fit door then I was able to just router out the opening. Made it pretty simple.
where did you get your Aluminum Pannels? They are a little different from the ones that ADV used or the ones I have seen from Piedmont Plastics. They look a little thicker. 3mm is the ones that Piedmont has. These look a little thicker. 4mm?? ACM Panels. Are these the Doors from Vintage Technologies? How do you like them?
I got the panels from a local guy by me. They’re 5mm thick if I remember correctly. And yes the door is from vintage technology. I had some leaking issues with the door I had to take care of myself so I wasn’t too happy with that but once I figured that out no other problems. Well made door
I like it, very similar to the way I built mine. for my doors I built the steel frame to fit door then I was able to just router out the opening. Made it pretty simple.
No seal tape (for water intrusion) for the corners under your aluminum edge trim?
There’s tape on all corners. May have just not been shown in the video
Having a great time watching the series! Sorry if i missed it, but what are the cab dimensions?
Thanks a lot. Cab dimensions are around 5’x8’
What part of Ohio are you from go Bucks
Cleveland area
is the tube used for wall 25/25 mm ???
@@djalaladv1289 I’m in the US so in our terms it’s 3/4 of an inch by 3/4
@@ian_whitelock thanks bro good job , i bring a trailer already prepared wich is better 8/5 feet or 10/5
thanks
Chingon🎉
where did you get your Aluminum Pannels? They are a little different from the ones that ADV used or the ones I have seen from Piedmont Plastics. They look a little thicker. 3mm is the ones that Piedmont has. These look a little thicker. 4mm?? ACM Panels. Are these the Doors from Vintage Technologies? How do you like them?
I got the panels from a local guy by me. They’re 5mm thick if I remember correctly. And yes the door is from vintage technology. I had some leaking issues with the door I had to take care of myself so I wasn’t too happy with that but once I figured that out no other problems. Well made door
Where did you find aluminum exterior
Was able to find it at a supplier local to me
@@ian_whitelockcan you share the name of the supplier and the cost?
@@ronaldjackson2437 acm innovations. Cost was roughly 3-500$ for all panels. Got it second hand so it was much cheaper than if bought new