PVC WAR HORN - Test Build
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Building a small war horn from PVC was fun but you're gonna love the gigantic final project that I do next! Can you make a better human powered PVC war horn!? #HUMANPOWEREDPVCWARHORNCHALLENGE
MY PATREON
/ jairusofall
GAWKBOX : www.gawkbox.co...
TAD : givetad.com/JAI...
------------------OTHER STUFF------------------
Instagram: jairusofall
Facebook: / jairusofall
Twitter: @Jairusofall
Patreon: / jairusofall
Sponsorship Inquiry: bsearcy.joa@gmail.com
The tone at the end was awesome!
I got that deep sound!
Kinda reminds me of the tripods from war of the worlds.
Wickedddddddddd!
the Hacksmith you from Maine?
Keep knocking Doc, I don't care The Hacksmith? He's in Ontario. His channel is amazing
Kyle Campbell thanks Kyle!
FOR FUCJ SAKE
I think the hacksmith has the exact same recommended video's as I have... Nice
thats some mad-max shit right there
yes
6:09 chewbacca?
Lol yeah exactly
If you want to stick ABS together use acetone. It forms a chemical weld between the two sections and makes it pretty strong. You basically just paint the acetone onto the two edges you wanna stick together then hold it in place and it should set somewhat quickly
For a weld that is as strong as the base material, dissolve some ABS scrap in acetone until it forms a paste, then use it like glue. Once the acetone evaporates out of the paste, you'll have a solid ABS weld bead and no gaps. Much stronger than using just acetone but it takes hours to set if it's thick.
“Higher pitches so it doesn’t sound like a dinosaur”
the idea that Vikings came over with like, dinosaur esque battle horns is awesome tho
Imagine walking through an abandoned house or through the woods and hear the deep sounding horn
I made a pvc ship horn out of 90mm gutter pipe and a stiff PET plastic. Lets just say the neighbors dont like when i put 100psi through it.
harrison law 😂👍
harrison law hahaha
#PVCWARHORNCHALLENGE This could be awesome! Especially if we can get some people like the Hacksmith or Colin Furze involved!
Side note: The pipe I used for the horns was HDPE not ABS. Really difficult to bond.
If you use acetone on both abs surfaces that you wanna weld the hold them together for a few seconds than the acetone will evaporate leaving the two parts chemically bonded and its very strong :)
Austin Lower Well I wish I knew that a little while ago! LOL Thanks! I'll know for next time.
JAIRUS OF ALL watch anchorman. that's why he says loud noises and yells
I've been summoned.
Also I think Colin Furze has already won, he farted on France with a giant pulsejet =P
Build this yourself and you too can hook up with some hot T-rex teens in your area !
Dude, you triggered something! Mentioning all of those other TH-camr's made your viewers go off and watch / notify them. Then they stuck around and watched a video or two of theirs, so you contributed a huge amount of "session" watch time. This is my theory. Interesting... I'm on vacation, but I'll try this when I get back!
you should try filling the pipe with sand and capping both ends and then heat forming it to prevent it from being crushed.
Just made a pvc airhorn like the video. It is extremely loud and its so much fun to add different lengths of pvc to the end to see what tones I can produce. Thank you for the video!
i dont know why i just love this dude, he is my favourite crazy scientist.
Thanks!
Should have used abs slurry ...mix and with acetone it's great for bonding abs look it up
Jamie Ward it was hdpe it might still work idk
I used to go to a lot of LARP events and having something like this would've been super helpful.
I JUST SHIT MY PANTS!!!!!!!
Traditonal plastic welders use a spinning rod of filler plastic. The friction heats all three components (the sides to be bonded and the welding rod) and welds them together. Other plastic welders heat both sides by using a hot plate between the two sides and then removing it and sticking them together. Keep the torch for welding/soldering metal.
Thanks for the info!!
Awesome project. I use a hot air welder hand tool and and plastic rods to weld this on occasion, and it's still a son of a B*!ch, so I felt your pain brother 😂
Your shirt collection is amazing
Couple of tips: instead of trying to custom form your funnels, use cheap/inexpensive black plastic funnels from an auto parts store like the ones used for draining/filling automatic transmissions. Also to bend pvc pipe without it kinking, try filling the pipe with a sufficient quantity of play sand preheated in an oven to about 400 deg F. The hot sand will soften the pipe allowing you to bend it in whatever shape you want while keeping it from kinking/collapsing. Cheers!
Friggin awesome. Something to play up in the hills at night to terrify the neighbors lol.
This has been my field of expertise for over 25 years now, and I hate to break it to you, but between 279-450BC PVC was more of an ivory colour! But apart from that, beautiful work mon ami. 👍 Best wishes from an Englishman in a French forest (lifts visor and salutes) 🏆🇬🇧⚔️
To bend pvc similar to a mandrel you can plug the ends (wood plug works well) and fill it with hot sand heated on a stovetop. The pvc absorbs the heat from the sand and is able to bend without crushing because the inside of the tube is full.
lol we all have that one friend who screeches for the hell of it.
The best material I've found for making PVC air-horn diaphragms is vinyl sheeting. It's pliable enough that it's not too awful to work with, but it's also quite tough.
1:50 "Horn! Bphfphfhfppfh..." Great moment.
Some use sand to keep copper pipe kinking when bending, could work here also, but weight will become an issue.
If you fill the pvc pipe with sand and heat it up, the sand prevents kinking
or you can heat the sand in a saucepan first and then bend the pipe.
I'm glad you are pretty rapidly gaining subs. When I first subscribed you were a small channel building at a big channel production level.
That at the end sounds like a genuine war horn.
Test the power fist on materials with high tensile strength.
Jairus, the reason shooting the air horn into the pipe didn't work is because all those bends has actually created a low pass filter. Your DIY air horn works because it's a lower frequency. If you took some bends out (like almost all) it would actually be much louder.
as you have found it is difficult to make a continuous profile from your straight sided pipe. You can build a very effective horn using stepped sections of larger and larger pipe to provide the horn expansion.
You know ASB glue is in every hardware store, right? The other thing If you filled the PVC pipe with sand or salt cap or plug the ends before you started to bend the pipe in a coil it wouldn't of collapse in the tight bends.
The multiphonics at the end are so cool!!
7:16 sounds bad ass. I'm making one now
To resolve the kinking issues you had with the curly bit, you could run an aluminum rod, (or any bendable, yet rigid rod) through it, and bend it to your liking. You'll get the clean shape you want, but it won't be all floppy because of the rod.
Now this is gonna be epic project! I challenge you to make the final horn loud enough to break your neighbours windows! However if you cannot get it loud enough just toss it through the neighbours window to maximize the annoyance :D
I would get a bending spring for the thin plastic to prevent crinkling or cracking. The spring will help to keep the pipe from losing form when heated.
Hope this helps, nice build.
If you want to bend the pipe without constriction, you have to fill it up with sand first! This definetely works with metal, so it should work with the PVC as well
More inspirational model building videos? That video was so great
that last part was beautiful
Urgent Question: While the challenge may be over, Homecoming season is not, I plan to build a PVC Greathorn/Warhorn and need to get a better understanding of the artificial little diaphragm piece. Are you/him blowing like a horn, or are you simply pushing air into it with the pipe touching the plastic? Any tips on getting a deep noise from my horn? If anyone has advice please send my way!
Heat up a bucket (calculate the volume) of clean sand in an oven or over a fire. Then dump it into the
PVC pipe, let the pipe warm and then twist it around a form. (like a bucket). This came from a 60's or 70's issue of Popular Mechanics for making lamps out of PVC pipe. (less danger that way) ;-)
That horn sounds badass.
If you build that gargantuan one, please, if you can, add the weight to the diaphragm again. That lower noise is really badass!
Ive seen people fill the pvc pipe with sand, and pack it in to let it retain its shape, that seemed to work pretty well.
Great job. I think I'll build one but use plastic oil funnels.
I think they are called Stat Mark pens. But they are used to label microscope slide. I would try those since they are made to write on glass
Just found your channel, super innovative and entertaining, keep it coming!
awesome
have you gone into bell making ?
loads to be learnt and tried there
Finally, your channel starts growing! Good for you!
Thanks!
if you want to bend a pvc tube, close one end, fill the tube with wet sand, warm the tube, bend it, remove the sand, voila! perfect shape.
Fooking awesome!!
to plastic weld ABS can't you use an ABS paste by melting scrap ABS in acetone? then use it as a glue to melt the two sides together
Hello Jarius!
Im making a video game, and looking to have a war horn sound over the battlefield when demons approach... i was wondering if i could use this video for sound effects?
and a bit of a further request, i was wondering if you could release a new video with this horn being sounded as a battle charge lol
i know im asking a lot, but i would really appreciate it!
Thanks, either way.
I like these kind of channels like JAIRUS OF ALL, Colin Furze and The Slingshot Channel
luv dat
Can you imagine going into battle, and sounding your horn, and everyone stops, with a very weird expression on their faces, only to drop to the ground and crapping!!
If only the brown note actually existed!!
Holy shit.
I need to do this.
That is the best war horn I've ever heard.
Very cool build. I'm always curious how a video got shred when it has many more views than the channel has subs. Any advice on that?
Since you actually told us when the video was going to be loud and not i am going to subscribe.
That's a nice courtecy.
I totally see you doing a Raider warlord cosplay with that!
Sounds sick at that medium pitch.
This build didn't have any wreckless endangerment of Bryce. 3/10.
Sounds like dupstep
LOL
Subscribed because he cracks me up
Could you try using like an industrial acetone and a thin paint brush? This would score the plastic quite a bit.
63k subs? Damn you blew up man.
It happened in about two weeks! Crazy fast!
Your consistently awesome projects have to be a big part of that. Keep it up bro.
If you pack the pvc pipe with sand and then heat it up and shape it you'll maintain a cleaner inner diameter without any kinks. Just a thought. 🤔
I can't wait to see the bigger one
Next time you do plasticwelding, try with acetone first. it actually melts abs and pvc and you can just glue it together with it.
"time to make this hot and try not to die." I like the way this guy lives his life.
perfect for new years!
Oh my god Jarius that last sound sounded so cool
Very cool! But couldn't you use an actual plastic welder to weld the pipe together at the seam?
Ian Ingram I could've but I don't have one. 😔
that diy air horn tho! super cool!
Hey just some advice, if you're trying to draw as straight line on something round, such as tubing, use a pice of angle iron. Its much easier.
I hope the next horn does reach the brown node. Beautiful south park reference
I appreciate the heads up on the volume
Amazing video as always! You are a big source of inspiration for me to work on projects, even though I'm more of an electronics/programming guy than a builder.
Keep up the amazing work! I can't wait to see what you make next.
Nathan Seymour Thanks! Comments like that mean a lot to me!
Something you may want to change is the actual horns. At your local auto parts store look at the long funnels.
You can fill the pipe with sand before you bend it. Takes longer to heat, but will not kink.
I used to breathe that kind of smoke as a kid when cutting PVC with the soldering iron. Didn't die. YET
That looks awesome!!!
BEST...SHIRT...EVER!!!!!!!!
A fine tip Sharpe but I actually suggest a fine tip BIC marker.they usually come in a set of fat, sharp, and fine
0.5 sec intro. I LOVE THIS CHANNEL!!!!!!!ive seen vids wit 4+minute intros...
I gotta say I'm impressed
Thats actually really cooo sounding
Make a Death Whistle?
... so it doesn't sound like a dinosaur
I literally laughed out loud on this one
HAHAHA
Does that diaphragm mouthpiece have a particular name? Would like to see some other designs on that if possible.
Use a pvc heat wrap to get it to bed. Itll help a whole lot
Subscribed. This is like... The dumbest most awesome thing I have ever seen.. I NEED one
This video made me spit my water out from laughing. I feel bad for my dog but you've earned a subscriber.
HELL YEAAA MAKE IT!!!!
Pack the pvc pipe with sand to curle it sand will move but not let kink. Might have to cap the ends so it dosent come out
weekend warrior horn come 6am sat ur bound to hear this .
That's the kind of horn I'd carry in a pirate ship