Convert my Recessed Lighting Downlight with LED Trims - Identifying if your housing can will work
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2020
- Convert 👉 www.totalrecessedlighting.com...
We have made this video to help make your transition to Recessed Led Retrofit Trim Modules smooth and easy. See how to identify your recessed housing can from a wide and growing list of recessed cans we have collected over the years. Know confidently if your recessed downlight can be converted. Now lets get started 😃
🔶 Video Sections
--------------------------------------
1:06 Baseline
3:30 Hard to Fit & Old Recessed Housings
1:18 - #25 Can
2:28 - #26 Can
3:03 - #27 Can
3:51 - #9 Can
4:43 - #16 Can
5:14 - #11 Can
6:44 - #20 Can
8:14 - #1 Can
8:50 - #6 Can
9:15 - #4 Can
10:09 - #7 Can
11:01 - #5 Can
11:19 - #12 Can
12:15 - #15 Can
12:44 - #18 Can
13:16 - #3 Can
13:46 - #22 Can
🎥 Video Links
--------------------------------------
✅ 2:01 6" Recessed Housing Can Video
• 5" recessed housing fe...
✅ 4:33 6" Recessed Housing Can
www.totalrecessedlighting.com...
✅ 6:52 Eyeball Trims
www.totalrecessedlighting.com...
✅ 7:58 Socket Plates
www.totalrecessedlighting.com...
✅ 8:30 Air Tight Trims
www.totalrecessedlighting.com...
✅ 8:30 LED Designer Trim Modules
www.totalrecessedlighting.com...
✅ 8:30 LED Retrofit Trim Modules
www.totalrecessedlighting.com...
✅ 13:09 4" LED Retrofit Trim Modules
www.totalrecessedlighting.com...
Recessed Products
--------------------------------------
✅ Torsion Spring Bracket Clips
www.totalrecessedlighting.com...
✅ LED Trim Modules
www.totalrecessedlighting.com...
✅ Designer LED Trim Modules
www.totalrecessedlighting.com...
✅ Torsion Spring Bracket Clip Video
• Recessed lighting Tors...
Connect with us!
--------------------------------------
🌎 Our web site:
www.TotalRecessedLighting.com
Like us on Facebook:
/ totallightingsupply
Follow us on Instagram
/ totalrecessedlighting
Follow us on LinkedIn:
/ total-lighting-supply
Follow us on Twitter:
/ totallightings
Subscribe to our TH-cam Channel:
/ totallightingsupply - แนวปฏิบัติและการใช้ชีวิต
Blown away at the production value and information in here!
So glad you enjoyed our video and shared your experience! Also, thank you greatly for the Super Thanks 🙂
Very impressed with the knowledge and information shared in your video. Thank you for educating me so I can make an informed decision for my house! There are so many different options available. Sometimes having a basic understanding helps to find a professional or helps to find the right materials for dyi projects.
You're very welcome. Glad our video was helpful 🙂
The cans I have were made by Catalina Lighting with a permanently mounted bulb socket. The faceplate attaches using simple springs that hook into an oblong hole in the can. Thanks to this video, I can now go and check whether I have C clips to attach the LED torsion springs.
So glad our video helped 🙂
Thank you for making this video. I have #20 and have been all over the internet trying to find something similar and all the videos show cans with spring clips already in place.
You're very welcome! Glad to hear our video was helpful for you 🙂
Very good presentation throughout.
Thank you 🙂
I have those #4 cans in my ceiling. I have the led retrofit lights with the V shaped springs. What I did was flatten those springs out so they are parallel to the light. Then, I stuck it up in the ceiling and put those springs behind the clamps on the box. You may need to do some bending of those clamps to get them where you need them. It looks like my box is bigger than the picture, but it's hard to tell. I just shoved the light socket off to the side. My retros could only go in one way because the springs hit the short side of the box. I just turned it 90 degrees.
That's great to hear you were able to retrofit your old recessed cans. Wa to go!
I have can # 9. What light kit should I use ?
I have an 8” cam recessed light and I wish I retro fit LED. Are there options for me?
I am so glad to be able 0:07
very impressive and good presentation. I have one of the 6" can as shown here with side slips. I am trying to switch to LED "Artika Horizon CCT". Is there a way to attach something inside the can to screw in the fixture?
We have some clips that can be mounted inside the recessed can. See if these will help www.totalrecessedlighting.com/torsion-spring-bracket-clips-for-recessed-housings.html 🙂
Any suggestions for cold air bleeding through? Currently I haven't replaced the old bulbs yet but I feel the cold coming through. There is only about 2 feet from ceiling to roof so I can't cap from above. Can I stuff some insulation in first then new led? I'm looking for angled recessed leds. Most of what I've seen has open space in the bulb allowing air flow. Do you sell sealed and angled led bulbs?
If you are installing LED trims from us most of ours are typically air tight and come with a foam gasket. Our trims will say in the product details description if it is air tight. We do offer foam gaskets that can help reduce draft but best thing is to ask a local electrician so you are in compliance with your local code when using an air tight trim and a non-air tight trim. You can find our foam gaskets here 👉 www.totalrecessedlighting.com/parts/gaskets.html
My can is # 9 With fixed bulb socket. What light kit should I use ?'
Best thing to do is fill out our form here and we can help you better ➡ www.totalrecessedlighting.com/convert-your-recessed-downlight-to-led.html 🙂
i have what looks like #6, i release the inner socket and no matter how hard i pull on the trim ring it wont come down. i cant see any little coil springs so im assuming it has some sort of torsion spring or friction spring. any help on getting the trim down?
These can be tricky. I would look to make sure there are no other clips holding the trim in place.
Would I need to replace the fixture, if when turned on, the light comes on for a second then shuts off?
Really hard to know what type of light you have to help with a solution 🙂
How I install #9
why is it that every retrofit led light i see is or looks recessed a bit, like maybe an inch? i really love those totally flat led lights, no recess at all, but they arent retrofit and are the ones with the little junction boxes attached....there must be a reason, so just curious.....
Having a light recessed helps reduce glare. So the further the light source is recessed from the surface the less glare will be seen from different viewing angles. So recessing it in slightly can help slightly in glare reduction. It is also for aesthetics and matches more with how recessed lighting traditionally looks. Hope that helps answer your question 🙂
@@Totallightingsupply yes, never thought about that and appreciate the info , but it seems the led lights that are not retrofit (the ones with boxes attached ) are all flat, no reccess and I really do like the look of those, but it would just be to much work in my situation. I have looked for retrofit ones that look like the super flat led's but they aren't out there...
@@frankcatrini4816 We have recently added 3" slim recessed lighting that are flat to our website with 4" coming later. Not sure if it is the style you are looking for but the trend seems to be going more slim. You can find the 3" here ➡ www.totalrecessedlighting.com/led-recessed-lighting/led-designer-recessed-lighting-trims/3-inch-led-designer-recessed-lighting.html
I have and issue with my led lights .. I had to cut the socket connection and hard wire the led light .. the problem I’m having is the led light will not full illuminate and I might add it’s on a dimer switch... need help
Sounds like the dimmer is causing the issue. Make sure the LED light and dimmer work together.
@@Totallightingsupply well there’s two switches one at each end of the hallway and it runs three lights only two of them are working And the oven is just a regular bulb so how do I check to see if the switch is working right because when I turn the switch on the one that’s not an LED light is bright and turns on
Sorry I reread your response.. so I need to get a Dimmer switch for LED lights because the dimmer switch I have now is for just a regular lightbulb correct
@@israelhorta6309 It could be a number of issues 😔 The best thing in this case is to get a licensed electrician to see what's going on.
@@Totallightingsupply ok then thank you for your help
what if theres cables and no housing can ?
Sounds like a retrofit shown in this video would not work in your situation but possibly a SLIM series recessed light where no recessed can is necessary. More information would be needed to determine what would work in your application.
Any workarounds determined for #4?
Unfortunately we have not found a retrofit that will work at this time 😔
We just mounted new lights in ours that is very similar to #4. We bought c-clips on line from Home Depot. They have some on Amazon too. You have to drill holes into the metal and mount these inorder for the new lights to stay in place. there is a video on here that gave us the idea about the c-clips.
@@LisaRobinson-jz7df Can you share a link to that video?
Convert my Recessed Lighting Downlight with LED Trims - Step 2 - Installing Torsion Spring C-Clips
@@Totallightingsupply The video is on your youtube :Convert my Recessed Lighting Downlight with LED Trims - Step 2 - Installing Torsion Spring C-Clips
I think I’m in Trouble…I have a home built in 1993 and it has like 30 oddball cans with the dreaded box style
We also have a list of recessed cans on our website that you can compare yours too and see if we have any LED trims that would be compatible. Maybe there is a chance we have a LED trim that will work 👇
www.totalrecessedlighting.com/convert-your-recessed-downlight-to-led.html
Don't like that light with ribbs need flat as possible
You can find our Slim line LED recessed trims that should meet your needs here: www.totalrecessedlighting.com/led-recessed-lighting/led-canless-designer-recessed-lighting.html - Hope that helps 🙂
Or you could just buy an LED light bulb and call it a day think smarter not harder
Yes you could buy a new LED Light bulb for some applications and problem solved! However, there are applications where the trim needs to replaced for various reasons like it's old and brittle, yellowing, needs to be air tight, etc . . . that's when a replacement trim is great and an all in one option makes it that much easier to get the job done 🙂
ya and i could just say fuck it and go smoke a big one