Quick question. I did the plates on my 15 silverado. I am get ready to put a 3/2 level lift on it and 22x12-44's with 33 inch tires. Will mine rub because of the width or will it clear?
What’s the offset on the wheels? I have a 2” leveling kit, 17x9” wheels with a -12mm offset. Same truck. Was wondering if I could fit 35x12.50’s with this
That's a bit of a loaded question, as it would depend on the tire wheel specs (ie tire width, wheel width and backspacing) along with how you will be using the truck - more likely to rub during offroad use. We have fit a 35x12.50 tire on stock wheels with as little as 2" of lift, but they do not "clear" for offroad use without additional trimming
@@ZONEoffroadproducts iv got the same truck,. 15 z71 CC, 3.5 RC lift, I'm running the factory GM 22 wheels with 285/55r22 ridge grapplers... I wanted a wider stance to fill the pocket fenders but oe look .. added 2in spacers and it's only running in the driver side rear fender. I'm thinking the caster alignment is off becasue there's plenty of room on the passenger side, no issues when turned full lock to lock
Quick question. I did the plates on my 15 silverado. I am get ready to put a 3/2 level lift on it and 22x12-44's with 33 inch tires. Will mine rub because of the width or will it clear?
What’s the offset on the wheels? I have a 2” leveling kit, 17x9” wheels with a -12mm offset. Same truck. Was wondering if I could fit 35x12.50’s with this
I have a 2021 GMC sierra 1500 SLT When will you guys have a fender trim paint for that?
Are you planning on added these to the 2500/3500hd trucks
Do these trim plates allow for 35" tires on a Zone leveling kit or a Zone 2" lift kit for a 2018 Chevy Silverado?
That's a bit of a loaded question, as it would depend on the tire wheel specs (ie tire width, wheel width and backspacing) along with how you will be using the truck - more likely to rub during offroad use. We have fit a 35x12.50 tire on stock wheels with as little as 2" of lift, but they do not "clear" for offroad use without additional trimming
Will these plates also work with the 2500s?
Anything yet for a 2020 GMC Sierra ?
Please reach out to or our website for the most recent fitment lists!
Did you have them for the 2014 f250s?
we don't offer trim plates for the F250s at this time
Where are you guys located?
We are located in Michigan, and all our kits are manufactured here in USA/MI
What size lift was on the truck ?
2" Zone leveling kit, 35" M/T Baja Boss, 17" Methods
@@ZONEoffroadproducts iv got the same truck,. 15 z71 CC, 3.5 RC lift, I'm running the factory GM 22 wheels with 285/55r22 ridge grapplers... I wanted a wider stance to fill the pocket fenders but oe look .. added 2in spacers and it's only running in the driver side rear fender. I'm thinking the caster alignment is off becasue there's plenty of room on the passenger side, no issues when turned full lock to lock
Do these work on a 17 2500hd?
We don't offer trim plates for the HD trucks currently
From what I can tell itll work on the 2500 did this on my dads 1500 and bout to do it on my 2500 in the next month or 2
You need better light