DANGER!! Caution! While drilling a hole into the bottle cap, had the bottle cap caught on the drill bit when the gentleman was holding it in his bare fingers to stabilize it, that cap would have spun rapidly and most likely caused severe wounds to both his thumb and finger. ALWAYS HOLD metal material being drilled with an appropriate tool!
Ein grosses Kompliment. Kurze aber geniale Ideen. Ich liebe die Kabelbinder auch dieser Trick ist genial. Eigentlich alles so gut. Woher nimmst du diese einfachen aber genialen Idden. Erstaunlich. Danke!
I am with you on that! It’s the primary reason that I am subscribing to this channel. There is one channel that I would love to watch more often but the person submitting it has an insane cackle like Kamala Harris. Can’t stand listening to her or to him when he’s cackling at the end of his videos that he submits.
Hello from Oklahoma! I've been an aircraft mechanic for over 40 years. Good video for a teenager starting out.👍This tool is a last resort when a fastener has been abused. If the vise grips come out something is FUBAR. Where was the surprise use for the vise grips??
The one with using a bolt with a ruler was maybe interesting though there’s easier ways to do that. The bit with the grinder … I’ve used grinders for some 50 years and put the “blades” on and off simply by hand 99+% of the time. The rest of the “ideas” were more work than the results warranted. As to a bit depth gauge … I actually have them but usually use a bit of electrical tape wrapped on the bit. The one idea I liked was that slot in the side of the zip tie bag as a dispenser though I tend to just carry multiple types and sizes in my “stuff” and tool boxes.
I have been looking for a spot welder on amazon ( around $50 to start and caption is oftenn returned ) I have many of these dead trinkets in my shed spark plug , small charger clips and batteries . I might try this in the spring
Watching many videos like this one I see the rebuilding of dead battery packs for power tools and spotwelding looks like a much better method than soldering.( I'm not good at ) I discovered a while ago its just recharble batteries connected in series .
Куча бесполезных идей. Зачем изобретать то, что уже давно работает. Может для школьников и будет интересно, но для мастера это бесполезная трата времени
DANGER!! Caution! While drilling a hole into the bottle cap, had the bottle cap caught on the drill bit when the gentleman was holding it in his bare fingers to stabilize it, that cap would have spun rapidly and most likely caused severe wounds to both his thumb and finger. ALWAYS HOLD metal material being drilled with an appropriate tool!
This is absolutly dangerous. If this tears up - it can cause heavily injuries.
Brilliant!
Simple & effective. Good job.
’ve already started applying some of these tricks and they’re working wonders. Amazing content
Superb 👌
Thankyou ,very useful!
Thank you for showing those ideas, I appreciate them and I will definately use at least one ofthem.
Yes, but first notify the hospital emergency room that you are coming soon 😂
Thanks for the clever tips.
Excellent
Super 🤝👏👏👏👏👏👏👏👏merci 🙋
Ein grosses Kompliment. Kurze aber geniale Ideen. Ich liebe die Kabelbinder auch dieser Trick ist genial. Eigentlich alles so gut. Woher nimmst du diese einfachen aber genialen Idden. Erstaunlich. Danke!
Thanks for the great tips and for not boring us with chatter, or annoying us with distracting "music."
@@lanierosenberg 😊♥️
I am with you on that! It’s the primary reason that I am subscribing to this channel. There is one channel that I would love to watch more often but the person submitting it has an insane cackle like Kamala Harris. Can’t stand listening to her or to him when he’s cackling at the end of his videos that he submits.
Всё старо как гов#о мамонта.
Awesome hacks! Thx.
In order to hurt you, yes, indeed 😂
Complimenti vivissimi !!!!!!
Gute Ideen. Danke.👍
Thanks for not adding impossible music !
Canal muito Show Parabéns
Er ist der inGENIEur der Werkzeuge 👍🤭☝️💪
Hello from Oklahoma! I've been an aircraft mechanic for over 40 years. Good video for a teenager starting out.👍This tool is a last resort when a fastener has been abused. If the vise grips come out something is FUBAR. Where was the surprise use for the vise grips??
The one with using a bolt with a ruler was maybe interesting though there’s easier ways to do that.
The bit with the grinder … I’ve used grinders for some 50 years and put the “blades” on and off simply by hand 99+% of the time.
The rest of the “ideas” were more work than the results warranted.
As to a bit depth gauge … I actually have them but usually use a bit of electrical tape wrapped on the bit.
The one idea I liked was that slot in the side of the zip tie bag as a dispenser though I tend to just carry multiple types and sizes in my “stuff” and tool boxes.
I like the solder in the syringe 👍🏻
Great idea. It may melt sooner or later.
No, you can´t "eject" it out, you have to pull it out!
I have been looking for a spot welder on amazon ( around $50 to start and caption is oftenn returned ) I have many of these dead trinkets in my shed spark plug , small charger clips and batteries . I might try this in the spring
Watching many videos like this one I see the rebuilding of dead battery packs for power tools and spotwelding looks like a much better method than soldering.( I'm not good at ) I discovered a while ago its just recharble batteries connected in series .
He is very lucky that he didn’t cut his finger when he drilled the hole in the bottle cap
Headline should be “daft git looses correct tools for the job so bodges some sh*t up in a dangerous manner!”
🤦🏻♂️
I don't think super glue alone is enough. You should try using screws to secure the spring. That would be great.
Isso é internet, só funciona no vídeo!!!
the proper tool to tighten the grinder wheel comes with the grinder why use bolts and a screw driver ???
Because the guy is a genius at being stupid 😆
In case it gets lost…
Wait, sarcasm?? 😂
Meu caro, isso é quando não tem a chave correta.
Great idies
👍👍👍👍👍😀🙏🙏
Young looking hands for a 50 year old he must have some serious moisturiser
He uses Palmolive, he's soaking in it! 😁
Qoyil👍
There's a proper tool for all of them "tips"
No way!
Os discos na rebarbadora apertam-se à mão! Nada de extraordinário...
The best
Clever !😊
The syringe solder feeder was good
Давайте скинемся этому ГЕНИЮ на памятник😂😂😂
I like the grinder tip. He’s right, the tool provided is crap!
Nothing wrong with the tool provided. You don’t need to tighten up too tight. Centrifugal force keeps the disc secure.
Can't hold cap while drilling it. Will cut fingers.
Tip 1 heat the spring and let it melt into the handle, then a dab of glue. 👍🇨🇾
Or, like me, buy pliers already equipped from factory 😅
Where do you find 7 up anymore?
Мой отец ругался сильно, когда я отвёртку вместо воротка использавал.Как потом кривой отвёрткой работат ь ?
A beautiful catalog of stupid things and especially for some, dangerous 😬
You’re not wrong! Stupid git is now passing his stupidity on to others. Get the ambulances on standby!
Glue won’t hold pliers for any length of time!
Where's the drill bit with the black zip ties?
0:13 в СССР выпускали садовый секатор с подобной пружиной
Why was there no guard on the grinder. ?
At 50 years old you’d think he’d know how to hold a pair of side cutters.
А обязательно pz биту использовать что бы выкрутить ph саморез?
Советы не то что бы странные, просто бестолковые…
genius
Good waste of a tie wrap magic marker ink much cheaper
Haha 50 year old man? So that’s old now?
Well it’s only middle age if he plans to live to 100
Cleaver tips.
This video was painfully slow at 1.5X speed.
I watched the Video and all I saw were risky half-baked ideas so where is the Genius bit?
I tend to just buy the right tool for the job instead of this backwoods hillbilly stuff.
Why didn't I think of that??
😭😭😭🤙
Click bait. Absolute garbage that most people already know.🤦🏻♂️
прям Кулибин.мля
Куча бесполезных идей. Зачем изобретать то, что уже давно работает. Может для школьников и будет интересно, но для мастера это бесполезная трата времени
Waisting of time. This man doing the same things we used to do 60 years ago
Crap
pure WOT(waste of time).
На цлен себе клея налей
Absolute nonsense
"Boy's got'a head on 'em like a house cat (Never quite understood that saying but heard it my whole life.)
7up
Lame
some of these are absolutely stupid
Some of these are absolutely brilliant
Not 50 yr old hands for a craftsman or carpenter.
BIDON COMME GENIE 😅😅😅😅😅