En este vídeo os vamos a enseñar cómo hacer un mini cañón casero utilizando un tornillo y una tuerca. Es muy fácil de hacer y es muy divertido jugar con él, aunque hay que tener cuidado con este juguete.
But how is it that when you crush the mixture it explodes and when you compress the ball and the cotton wool inside tightly it doesn't explode? Does the cotton wool stop it?
@@elad5621 it's the grinding to make it burns, like when you strike a match. If you just press strongly a match on the band of the match case, it will never ignite.
When i was a kid we used to make this exploding 'toy' using 2 large bolts and a nut. I think it was my dad who showed us how to make it! Different times! Basically, you screw the tip of each bolt into the opposite sides of the nut, but you put some kind of contact explosive in the middle between the 2 bolts. Usually swan vesta match head scrapings. Then you drop it from height onto a hard surface and it goes bang, usually sending both bolts in different directions! We used to drop it off the balcony onto the pavement below. Luckily we never broke any windows or hurt anyone! Happy days.....😂
You are correct. The right to keep and bare arms equal to the maximum firepower of the day is a human right due to the constant evolution of arms and combat, and thus the ever evolving need for adequate protection and defense.
Use matchsticks and grind them, then pour them into patent-bolts with a hole in the back. Then cut open a cap gun cap and take out the little paper, then insert that into the back of the patent bolt. Now insert a nail in the back sealing it off. When the nail is hit, the “primer” explodes, thus setting the round off.
You could maybe fashion a breech by drilling into the barrel from the top and seal the opening by tightening the nut to cover the opening. Not sure there would be any benefit unless you were using paper cartridges to hold powder/wad/projectile. Might be an interesting experiment. Might have to built a slightly longer cannon/barrel? Pretty sure it will work. The propellant being impact sensitive you might also incorporate a percussion cap or similar ignition system.
В моём детстве, у каждого уважающего себя мальчишки 12-14 лет, просто обязан был быть "самострел", "поджиг" оформленный в виде пистолета, с длинной трубкой... Мой, с зарядом ~ 150 спичек, свинцовым шариком диаметром 8-10 мм, пробивал берёзовое полено 100 мм с 3 метров! И где автор научился устанавливать свой болт с возможностью лететь назад в результате действия отдачи!? Это дейсвительно, крайне опасно и неосмотрительно!😢
Фантазер 😂. Сера не может так мощно стрелять. Пуля из ружья , стреляющая современным порохом ,и то, вряд ли пробьет две 5 см доски, (10 см), а ты говоришь, что какой то поджиг смог пробить 10 см 😂🤦🏼♂️. Запомни - поджиг это пукалка, пугач, тем более со спичечной серой
А следующим этапом после поджига, был куркач! Металлическая скоба била по гвоздику со сточенным острием, который был вставлен в отверстие в задней части ствола. Мы так в войну на стройках играли) Эх молодость....
@@superpuper1564зря ты так... Поджиг поджигу рознь. Бывало получались ручные мортирки у умельцев) Геморойно было только спички стачивать. У меня поджиг был из киповской трубки. Толщина стенки три мм. При максимальном заряде пробивал фанеру 12мм насквозь. Пуля откусанный кусок проволоки катанки диаметром 5мм. А калибры разные были... Кто что найдет)
@@superpuper1564 я рассказываю о своём опыте, а ты, по всей видимости, пользуешься теорией невероятности! У нас и порох был, дымный, бездымный охотничий и из винтовочных патронов! Были даже патроны фирмы Кайнок 1916-1918 г. в., вполне годные к стрельбе. Сера сере рознь! Нынешние спички даже зажигаться не хотят, да и количество состава на головке раза в полтора- два меньше чем у "наших".А мощность выстрела обратно пропорциональна диаметру запального отверстия! У меня был 0,8, а у некоторых доходил до 3 ! Понятное дело, что с такой дырищей, кроме звука, мало на что можно было рассчитывать...
There's no need to mix the two that makes for dangerous loading as the mix is friction sensitive now and could detonate whist you loading. Also change your ramrod for plastic, wood, copper or brass, that will reduce the chances of sparks, otherwise those were plenty of fun to play with. Also check out a few videos on making black powder, lots of fun and smoke
@TheRealLoganJosh yeah fingers are expensive lol. There are also videos on TH-cam to make gun cotton. Much more powerful than gun powder. Just if you decide to make then use with caution as these are all explosives.
Good point when this experiment is done correctly no red phosphorus or glass shards from the striking pad are used only the match head, which is sugar, ammonium, nitrate, and glass shards for the extra friction created
Greetings from St. Petersburg!This mixture is very well suited for a projectile with the possibility of rupture... In my youth, there was a pneumatic screw-and pellets were sold, they burst when they hit the surface and distributed cotton. I think the 4.5mm plastic pellet was filled with a similar compound! Thanks for the video! 😊👍
Когда в детстве не добрал с мальчиковыми играми. Но "пушку" лучше бы закрепить. Чего только мы в своем советском детстве не поджигали и не взрывали, каких только стреляющих и пугающих штук не изготавливали. Самое безобидное, это делали микропушки из медицинских игл (игла, стирательная резинка как лафет, спички, вата и свинец), корабли из жести, пластилиновых матросов и устраивали морской бой в ванне. Со стрельбой из этих пушечек и потоплением корабликов, так как снаряд пробивал жесть бортов.
Get some potassium nitrate and dilute it in a solution of water what's a tablespoon full of potassium nitrate and a quarter cup of water. Put a coffee filter in the solution take it out and let it dry and after it's dry you can use the coffee filter you can twist it into a fuse.
Really impressive, you could measure the velocity of the ball and multiply with the weight of the ball so you see how many J is in this thing. Maybe a longer barrel would give it much more kick?.
Mixing that much Armstrong mix and using a metal scoop to get it out of a glass container it absolutely 100% what you shouldn't do. You really didn't think about that im guessing.
I have used Strike anywhere matches to fill the .22 air rifle pellets which are hollow inside but from the rear, compressed it into the pellet then sealed the back with epoxy resin and have a bunch of pellets that explode on contact.
Glass pestle? An old school mate almost blew his face off with one of them. Please folks if you are going to do this at home (not recommended!) flat heavy wooden surface only when you form an explosive mix, and light weight disposable plastic tools for handling the explosive mix (eye protection a must!), that way if it detonates while handling there is minimal risk of confinement or dangerous shrapnel.
Yep, this. The mixture of match heads and striking material is much more volatile than people realise. A friend almost lost his fingers making a bolt bomb with this mix ... the bolt ended up 10 metres away embedded in the neighbour's deck, so deep the neighbour never realised it was there.
did the same also and used sections of bike frames to make cannons, one end folded over airtight, for wadding we used sheep's wool caught on barbed wire fences, we called them banger guns as we got gunpowder from bangers (fireworks) but also made crude powder from red match heads, we also used two 48mm threaded bolts held with one nut in the middle and thrown like a hand grenade, it was about one foot long and when it went bang it was like dynamite going off, scared the shit out of us, we found the nut buried into a tree trunk, all very dangerous but wouldn't have done it if it wasn't, we as about ten I reckon,
Use just the match tips, adding the striker part “red phosphorus” makes it sensitive to shock it can easily go off by pushing into the chamber ending is a catastrophe
Смесь это берт соль, немного горючего и красный фосфор в основном, смесь склонна к детонации в замкнутом объеме- поэтому велик риск разрыва ствола, неравномерность давления по длине ствола. Лучше черный порох с начальным импульсом от той же смеси кр фосфора и гововок спичек- в небольшом количестве( примерно 1/3 от массы пороха), тогда результат надежен
If there is a specific phone that gives you problems and you want the manufacturer know that you do NOT like their brand, just send them a video telling them what you think about their phone and presto, you've got some real excitement going on!! The Iphone and the Goggle Pixel phone would be ideal candidates. Since they either are too cheaply built or too expensive to repair, OR take like Apple doesn't even want to grant you the owner of your phone an individual, the right to repair or allow you to source OEM replacement parts! I've been damned tempted to do that sort of thing, just to prove a point that when a manufacturer thus decides to screw over the consumer, they end up getting free advertisement of the adverse kind and rightfully so!! I'm fairly certain that the phone that was used in the video ended up being a Samsung S7 which was one of those phones that had display problems and the fact that just about any of the Samsung phone display glass breaks way too easily! Why they can't seem to make them better is beyond me, but hey!
Mixing the match paper with the powder is a very bad idea , you just made it friction and impact sensitive, completely unnecessary and extremely dangerous….
You used metal push rod and tissue to push powder into battery. That can be a bit dangerous. Agree? Premature ignition maybe? Keep it safe, use an item made of wood or plastic as push rod. Hope to see more vids soon.
En este vídeo os vamos a enseñar cómo hacer un mini cañón casero utilizando un tornillo y una tuerca. Es muy fácil de hacer y es muy divertido jugar con él, aunque hay que tener cuidado con este juguete.
But how is it that when you crush the mixture it explodes and when you compress the ball and the cotton wool inside tightly it doesn't explode? Does the cotton wool stop it?
@@elad5621 it's the grinding to make it burns, like when you strike a match. If you just press strongly a match on the band of the match case, it will never ignite.
That is one really bad-@$$ mini cannon for sure!! Bad to the bone, little mini cannon!
It's A bolt,not a screw......
My god, I’m 48.. and I’m headed out to my shop 🔥💥🇺🇸
Nice handicraft sir! You destroyed everything with art
#Merdeka! 🖐️😑
Thanks!
When i was a kid we used to make this exploding 'toy' using 2 large bolts and a nut. I think it was my dad who showed us how to make it! Different times! Basically, you screw the tip of each bolt into the opposite sides of the nut, but you put some kind of contact explosive in the middle between the 2 bolts. Usually swan vesta match head scrapings. Then you drop it from height onto a hard surface and it goes bang, usually sending both bolts in different directions! We used to drop it off the balcony onto the pavement below. Luckily we never broke any windows or hurt anyone! Happy days.....😂
Love the cannon. But it's your ability to drill the bolt straight that gets me.
In South Korea, it is illegal to make a homemade cannon. I am Asian, but I know that owning a gun is a human right. Thanks for the great video.
Thank you very much, but be careful
You are correct. The right to keep and bare arms equal to the maximum firepower of the day is a human right due to the constant evolution of arms and combat, and thus the ever evolving need for adequate protection and defense.
Immigration to the US US possible 🙃
Use matchsticks and grind them, then pour them into patent-bolts with a hole in the back. Then cut open a cap gun cap and take out the little paper, then insert that into the back of the patent bolt. Now insert a nail in the back sealing it off. When the nail is hit, the “primer” explodes, thus setting the round off.
Are you saying that the cability to kill another human is a human right?
The fact that it punched right through that 2x4 is proof enough.
Bolt action?
Lmao
You could maybe fashion a breech by drilling into the barrel from the top and seal the opening by tightening the nut to cover the opening. Not sure there would be any benefit unless you were using paper cartridges to hold powder/wad/projectile. Might be an interesting experiment. Might have to built a slightly longer cannon/barrel? Pretty sure it will work. The propellant being impact sensitive you might also incorporate a percussion cap or similar ignition system.
Oh yeh Bolt action yo mouth going *slurp*
That's nuts ! I'm making one rn
Simple Idea but dangerioious
Показал это каждый пацан знал в СССР как собрать огнестрел за пол часа.
Jajajajajajaja me trajo recuerdos de mi niñez, tambié construía cañones y usaba pólvora de fósforos..
I love it!
I love the good mood of this video. Anyone knows the title of the music of the end?
Direction - the nightjars
В детстве мы называли такие игрушки самодралами .мне70 лет
The force would be much greater if you place the rear side directly to the backside wood. Much power is lost by moving the bolt backwards.
В моём детстве, у каждого уважающего себя мальчишки 12-14 лет, просто обязан был быть "самострел", "поджиг" оформленный в виде пистолета, с длинной трубкой...
Мой, с зарядом ~ 150 спичек, свинцовым шариком диаметром 8-10 мм, пробивал берёзовое полено 100 мм с 3 метров!
И где автор научился устанавливать свой болт с возможностью лететь назад в результате действия отдачи!?
Это дейсвительно, крайне опасно и неосмотрительно!😢
Фантазер 😂. Сера не может так мощно стрелять. Пуля из ружья , стреляющая современным порохом ,и то, вряд ли пробьет две 5 см доски, (10 см), а ты говоришь, что какой то поджиг смог пробить 10 см 😂🤦🏼♂️. Запомни - поджиг это пукалка, пугач, тем более со спичечной серой
А следующим этапом после поджига, был куркач! Металлическая скоба била по гвоздику со сточенным острием, который был вставлен в отверстие в задней части ствола. Мы так в войну на стройках играли) Эх молодость....
@@superpuper1564зря ты так... Поджиг поджигу рознь. Бывало получались ручные мортирки у умельцев) Геморойно было только спички стачивать. У меня поджиг был из киповской трубки. Толщина стенки три мм. При максимальном заряде пробивал фанеру 12мм насквозь. Пуля откусанный кусок проволоки катанки диаметром 5мм. А калибры разные были... Кто что найдет)
@@superpuper1564 я рассказываю о своём опыте, а ты, по всей видимости, пользуешься теорией невероятности!
У нас и порох был, дымный, бездымный охотничий и из винтовочных патронов!
Были даже патроны фирмы Кайнок 1916-1918 г. в., вполне годные к стрельбе.
Сера сере рознь!
Нынешние спички даже зажигаться не хотят, да и количество состава на головке раза в полтора- два меньше чем у "наших".А мощность выстрела обратно пропорциональна диаметру запального отверстия!
У меня был 0,8, а у некоторых доходил до 3 ! Понятное дело, что с такой дырищей, кроме звука, мало на что можно было рассчитывать...
@@ВикторСоловьёв-с6ч было и такое..., но к тому моменту мы подросли и переключились на музыку и девочек.😉
There's no need to mix the two that makes for dangerous loading as the mix is friction sensitive now and could detonate whist you loading. Also change your ramrod for plastic, wood, copper or brass, that will reduce the chances of sparks, otherwise those were plenty of fun to play with. Also check out a few videos on making black powder, lots of fun and smoke
Thank you!!!
@TheRealLoganJosh yeah fingers are expensive lol. There are also videos on TH-cam to make gun cotton. Much more powerful than gun powder. Just if you decide to make then use with caution as these are all explosives.
I bet you was a kid with a screwdriver that took everything apart and your mom and dad just loved you
I don't know about that guy. What? That is true for me lol
loading up with metal to metal? one spark! and it could go off in your face!
I have a buddy who messed his hand up as a kid making something similar
No risk, no fun! 👍
Good point when this experiment is done correctly no red phosphorus or glass shards from the striking pad are used only the match head, which is sugar, ammonium, nitrate, and glass shards for the extra friction created
В детстве мы такделали пистолеты , только вместо болта использовали толстостенную трубку
Впечатляет 👍
You even cut a barrel crown, very smart.
Good...👌👌😃😃👍
Some metal pipe, firecrackers and AA batteries. Holy crap that was fun when I was young.
Greetings from St. Petersburg!This mixture is very well suited for a projectile with the possibility of rupture... In my youth, there was a pneumatic screw-and pellets were sold, they burst when they hit the surface and distributed cotton. I think the 4.5mm plastic pellet was filled with a similar compound!
Thanks for the video! 😊👍
سلام ، واقعا از دیدن این ویدیو لذت بردم ، امیدوارم ویدیوهای بعدی شما را هم ببینم موفق باشید 👌🏻👍🏼👏🏻👏🏻👏🏻👏🏻👍🏼
Супер, теперь я знаю, как сделать самодельный капсюль или револьвер с игольным воспламенителем.
Прямо как из моего детства🎉😅
Когда в детстве не добрал с мальчиковыми играми. Но "пушку" лучше бы закрепить.
Чего только мы в своем советском детстве не поджигали и не взрывали, каких только стреляющих и пугающих штук не изготавливали.
Самое безобидное, это делали микропушки из медицинских игл (игла, стирательная резинка как лафет, спички, вата и свинец), корабли из жести, пластилиновых матросов и устраивали морской бой в ванне. Со стрельбой из этих пушечек и потоплением корабликов, так как снаряд пробивал жесть бортов.
Nice pocket cannon 👍
Get some potassium nitrate and dilute it in a solution of water what's a tablespoon full of potassium nitrate and a quarter cup of water. Put a coffee filter in the solution take it out and let it dry and after it's dry you can use the coffee filter you can twist it into a fuse.
used to do such things as a child,even using electric ignitor instead of drilling hole in the end , not to lose power 😂
We were born in another era when we had fun doing dangerous 😂😂😂
Hi. This small "toy" is very powerful!! Try to fixing it on the wooden support or let it lean on its back: you'll gain the power lost with the recoil.
Wow i could make a larger version hmmm😊.
Братан спасибо тебе большое, я логотворя тебе смог наконецто кое что сделать
Стреляет пушка?
omg! it's more lethal than some guns!
coooooool toy))
Подай патент на изобретение 😂😂😂 мы подобным игрались во времена СССР
Really impressive, you could measure the velocity of the ball and multiply with the weight of the ball so you see how many J is in this thing. Maybe a longer barrel would give it much more kick?.
Cıvatayı sabitlesen damage daha da artar, ama çok tehlikeli bununla oynamak 😮
Nice canon... looks like a fun adult toy to have🍻
Thanks!!
Bad idea to use a high explosive like armstrong's mixture. Maybe just use matcheads.
...and he rams it into the firing chamber!!!!
@qwazert382 didn't even see that lol
@@qwazert382 - Imagine if he dropped it.
Ooh Armstrong's as propellant, careful 😂
Mixing that much Armstrong mix and using a metal scoop to get it out of a glass container it absolutely 100% what you shouldn't do. You really didn't think about that im guessing.
5:12 load the scrap bits and its a mini blunderbuss
impressionnant 😅😅👍👍👍👍👍
Ну не наигрался мужик в детстве) А так классно! Лайк.
Génial ❤️ 👍🤜🤛, Simple, Facile Fabrication et Vraiment très Efficace 🤜🤛🫡🌟🌟🌟🌟🌟. Bom Trabalho ❤
Merci beaucoup mon pote !
6.08- The most dangerous moment! If it was datonate that time, Your hand may be injured!😊
Is there a greater chance of blowing a finger off when you tamp in the wadding, or when you load the charge?
You got it. A Young Friend of Mine when We were just teenagers did just that. Ouch!
В возрасте 12 лет такие делали. Два отверстия в болте поселить и все дела. Незачёт.
I have used Strike anywhere matches to fill the .22 air rifle pellets which are hollow inside but from the rear, compressed it into the pellet then sealed the back with epoxy resin and have a bunch of pellets that explode on contact.
🇹🇷İtirafetmeliyim iyi iş çıkardın evlat
Yasal değil, Silah sayılır.
Innovative home defense technology
Glass pestle? An old school mate almost blew his face off with one of them. Please folks if you are going to do this at home (not recommended!) flat heavy wooden surface only when you form an explosive mix, and light weight disposable plastic tools for handling the explosive mix (eye protection a must!), that way if it detonates while handling there is minimal risk of confinement or dangerous shrapnel.
Yep, this. The mixture of match heads and striking material is much more volatile than people realise. A friend almost lost his fingers making a bolt bomb with this mix ... the bolt ended up 10 metres away embedded in the neighbour's deck, so deep the neighbour never realised it was there.
0:42 tip screw the nut on as well more clamping surface
awesome i like the slow motion camera
Nice one see someone using an Armstrong mix
Yesss!!!
did the same also and used sections of bike frames to make cannons, one end folded over airtight, for wadding we used sheep's wool caught on barbed wire fences, we called them banger guns as we got gunpowder from bangers (fireworks) but also made crude powder from red match heads, we also used two 48mm threaded bolts held with one nut in the middle and thrown like a hand grenade, it was about one foot long and when it went bang it was like dynamite going off, scared the shit out of us, we found the nut buried into a tree trunk, all very dangerous but wouldn't have done it if it wasn't, we as about ten I reckon,
Ten? Professional militia don't know how to do that.
Тип изобрëл поджиг)))
خیلی عالی بود 👍👌🏼👏💐لطفا آموزش یک کلت اگر بلد هستید بذارید سپاس از شما استاد عزیز 👍❤❤💐💐
Опасно ....
Очень опасно 😂
Next make a silencer for it.
if i was a dad i would make this
What a great informative vid... aaaaaaand there's the royalty free country music.
A longer bolt next time cwill be Aaaaaamazing
I’d use black powder or equivelent if that stuff really explodes when only pressure is applied.
Use just the match tips, adding the striker part “red phosphorus” makes it sensitive to shock it can easily go off by pushing into the chamber ending is a catastrophe
09:30...now that's what I call a Screenshot 😅
Yesss!!! hahahaha
Yes! That's right!😊
Sehr sehr gut gelungen ❤
Now make a musket version of this
Смесь это берт соль, немного горючего и красный фосфор в основном, смесь склонна к детонации в замкнутом объеме- поэтому велик риск разрыва ствола, неравномерность давления по длине ствола. Лучше черный порох с начальным импульсом от той же смеси кр фосфора и гововок спичек- в небольшом количестве( примерно 1/3 от массы пороха), тогда результат надежен
Всего лучше не заниматься всякой хнёй, а просто взять черный порох. Дешево и сердито, а главное безопасно.
@@FirstLast-n5b писал о нем. Импульс улучшает. Как в патронах- капсуль. Но там стифнат свинца, антимоний и берт соль- это в идеале
Кто играет с бертафосом,- с одним глазом и без носа☝️😒
@@ЖоффрейДеПейрак-е5й типа того, порох лучше. Однако промышленность делает капсуля на основе бертолетки с другой стороны
Echt cool..werde ich nachbauen..
Cool 👍💣👍
pretty cool but why make the powder friction sensitive if you are going to light it with a fuse, makes loading pretty iffy to me
Good point. The burn chamber has very little wall. Better to have a longer bolt, stop shorter and load the bolt with nuts for strength.
I only made that mixture to check in my workshop that it is very explosive with friction
@@ironmadeinamerica5123Think about a u-shaped ramrod so it doesn't blast your fingers. Then it's a pull, not push, you understand?❤
@@baloog8And if it goes off you get a 2 for 1 projectile
@@servicetrucker5564 lol, he should wear thick leather gloves either way. Good god.
Cool
Impressive!
Нарезку ствола сделай ☝🏻
Very nice and powerful 👏 👌🏾 👍
Think you just voided your phones warranty.
If there is a specific phone that gives you problems and you want the manufacturer know that you do NOT
like their brand, just send them a video telling them what you think about their phone and presto, you've
got some real excitement going on!! The Iphone and the Goggle Pixel phone would be ideal candidates.
Since they either are too cheaply built or too expensive to repair, OR take like Apple doesn't even want to
grant you the owner of your phone an individual, the right to repair or allow you to source OEM replacement
parts! I've been damned tempted to do that sort of thing, just to prove a point that when a manufacturer thus
decides to screw over the consumer, they end up getting free advertisement of the adverse kind and rightfully
so!! I'm fairly certain that the phone that was used in the video ended up being a Samsung S7 which was one
of those phones that had display problems and the fact that just about any of the Samsung phone display
glass breaks way too easily! Why they can't seem to make them better is beyond me, but hey!
Great enjoyed that
If you hold the bolt
the shot will be more powerful
هذا سبب في خراب العالم 🌏 ولغلاء الفاحش😢
Stimmt leider 😢
جيد رائع
That’s probly about as powerful as a .22
😊😊😊
yesss
Still lethal
@@ironmadeinamerica512322й мощнее будет
Bravo jéniale super bricoleurs 😅
Mixing the match paper with the powder is a very bad idea , you just made it friction and impact sensitive, completely unnecessary and extremely dangerous….
Yes, you are right. In the next video we have not made that mix anymore.
Скажите ему, что это называется пугач, и у нас дети собирают нечто покруче с 6 лет😂
В нас називали таке - Самопал.)))
Блін у 70-х цій іграшці вже було 300 років.
What was the thickness of the metal you were using as the backdrop?
Awesome
Is it J7? My goodness brings back memories
Impressionante
Try this at home to get feel meal!😂
R.I.P. blue toy soldier guy
You used metal push rod and tissue to push powder into battery. That can be a bit dangerous. Agree? Premature ignition maybe? Keep it safe, use an item made of wood or plastic as push rod. Hope to see more vids soon.
Nice video! Did you put anything beside the matchpowder in the barrel or was it the only propellent?
I only put what you saw in the video
i would never imagine matches could develop so much power
What was the fuse that you used please? Well done. I’ll make one.👍🇨🇮
It appears in the video. I used 6 millimeter diameter bearing balls.
I believe if a projectile is capable of piercing 1 cm or timber it is lethal.
You can make primer gun with that