Diy 2.1 Amplifier Ultra Bass Class A Using Transistors C5200 & D718 With Bluetooth Module
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Why don't we create a 2.1 subwoofer amplifier with Class A circuit? Probably this is the first Class A 2.1 Subwoofer amplifier for you to do it yourself.
The amplifier is used transistors 2SC5200 for a subwoofer, 2SD718 amplify two channels treble, connected to Bluetooth MP3 WMA Decoder Board for very powerful sound. The amplifier circuit also uses capacitors for speaker output
If you have additional improvements for the amplifier circuit or Ideas new, please leave a comment below the video. Thank you and wish success.
---------------------------------------------------------------------
*Subscribing to the channel so that you don't miss the latest videos:
www.youtube.co...
---------------------------------------------------------------------
****Video you may not have watched****
*DIY Class A Amplifier Using C5200 Transistor Extremely Powerful:
• DIY Class A Amplifier ...
*Diy Simple Three Transistor Class-AB Audio Amplifier:
• Diy Simple Three Trans...
*How to Make Simple Amplifier With Transistor PNP, Dual Speakers Connect:
• How to Make Simple Amp...
*Diy Amplifier Extreme Powerful Bass With Quad Transistors 2SA1943:
• Diy Amplifier Extreme ...
*Diy Amplifier Circuit Using Transistors 13007 From The Old Computer Power Supply:
• Diy Amplifier Quad 130...
*DIY Class A Amplifier 2SC5200 Transistor Extremely Powerful Using Output Capacitors:
• DIY Powerful Ultra Bas...
*DIY Amplifier simple 2SA1943 and 2SC5200 Transistor Extremely Powerful Using Output Capacitors:
• DIY Amplifier simple 2...
*How to Build 30W Mono Amplifier With IC NE5532:
• DIY 50W Mono Amplifier...
*DIY Amplifier Class A Stereo Extremely Powerful Using Output Capacitors: • DIY Amplifier Class A ...
*Diy Amplifier Stereo Class A Extremely Powerful Using Transistor H1061 Output Capacitors:
• Diy Amplifier Stereo C...
*DIY Amplifier Darlington 2N3055 Transistor Extremely powerful Using Output Capacitors:
• DIY Amplifier Darlingt...
-----------------------------------------------------------------------
Diagram: photos.app.goo...
-----------------------------------------------------------------------
Amplifier using: 2.1 channel
🔹Bluetooth MP3 WMA Decoder Board 12V Wireless Audio Module for Car x 1
🔹2SC5200 Transistors x 1
🔹2SD718 Transistors x 2
🔹2SD468 Transistors x 2
🔹2SC4793 Transistors x 1
🔹1K5 resistors x 2
🔹39K resistors x 2
🔹33K resistors x 1
🔹10 Ohm/20W resistors x 1
🔹15 Ohm/15W resistors x 2
🔹0.047uf capacitors x 1
🔹0.15uf capacitors x 2
🔹22uf/50v capacitors x 2
🔹2200uf/10v capacitors x 3
🔹4700uf/25v capacitors x 1
🔹50k double potentiometer x 1
🔹50k potentiometer x 1
🔹Power Jack DC x 1
🔹12v / 5A DC adapter x 1
🔹Aluminum heat sink x 1
🔹Insulation pads silicone mica x 3
🔹8 Ohm / 30W subwoofer speakers x 1
🔹8 Ohm / 10W x 2 satellite speakers
-----------------------------------------------------------------------
If you have additional improvements for the amplifier circuit or Ideas new, please leave a comment below the video. Thank you and wish success.
Thank vou. 👌
I can't find two capasitor please explain sir
0.047uf
0.15uf
@@pakistanyouth1606
0.047uf replaces: 0.022uf, 0.033uf, 0.068uf, 0.082uf...
0.15uf replaces: 0.1uf, 0.22uf, 0.47uf, 0.68uf...
Thank you very much sir
You r very good man
You r my teacher
Thank u teacher
Hay lắm bạn ơi. Bạn che tạo bộ khếch đại hay tuyệt vời quá bạn ơi. Like cho các bạn
I'm Russian, I love watching your videos
Thanks
😊 Like 79 good video my friend👍👍👍
Very impresif 😍
Thanks
In the same way. Make a 160w amplifier. We want to learn.👍👍👍👍Make clear shift values visible.your video is the best
Ok. Thanks
Awesome !!! Lots of coolness!!! Thank you !!!
Our pleasure! Thanks for watching!
Hi! Please help me with a doubt
In the circuit diagram, a 2200uF is connected to collector of 4793 transistor, whereas in video it is connected to base. Which one to follow?
6:24 watch again videos
It was amazing to make 2.1 class A amplifier !!! Some thing entirely different on TH-cam tube .. you have done great job, actually I wanted make it,, since class A amplifier is very simple !!
Are these transistor getting too hot???
Please add active subwoofer low pass 4th order filter in your 2.1 circuit using bc547.. it will enhance the Bass quality..
Please show us circuit diagram ...
How much current this 2.1 amplifier is using??? I mean quiescent current ??? Please please reply..
I have subscribed your channel !!
Excelent, very good.
Chào bạn iu hjhj
Nice
I have two 30W 3 ohm Harmon Kardon speakers I'd like to use. How should I modify the circuit for them? Thanks.
👌👌👌
OK circuit diagram I got at the end in description..
Sound is very good 😍
Send it to me in India😍
Thanks, friend
@@ShareTechCreative how match volt need to play?
@@ShareTechCreative teach me give me all informed don't know all about repering let's I try to make this this system operates in 12 volts ?
@@amit44s56
12 volts DC okay
these two resistances coming out of the potemiometer, which values. please
Mi estimado d cuantas pulgadas es el bajo gracias x el vídeo tenga buenas noches
El tamaño del altavoz y la potencia que elige, en el video es de 8 pulgadas. gracias
Om ada skema buat ampli dari sc5200 yg 1000watt
Magandang arw sa inyo tanong ko lng kung ano un pwede ilagay sa speaker pr lumakas un bass .
Super aquecimento das resistencia.
which resistors are joined in the capacitor potentiometer.
The two resistors connected to the two capacitors 154 are two 1k5 resistors
0.047uf e 015uf.
Juntas , cada uma em um capacitor. Obrigado.
Somente para dar a batida aguda e grave.
there are 2 capacitors each in a resistance. and one on the other. could specific. which goes to the double potentiometer.
Ok . Obrigado
Is there a chance you can breadboard the rest after te transistor assembly, can it be done?
Check if the transistor back (pins C) is touching the aluminum heatsink!
Schematic diagram 2.1 channel have you finished drawing ?
In the description
Can I use bigger speakers like 250W subwoofer and 200W tweeter? Will it still be loud enough?
Very creative..
Thanks a lot
in the absence of the 0.047uf ceramic capacitor and the 0.15uf could use the same electrolytic capacitors
Ok, pay attention to its capacitance value.
is this gonna work with 4 ohm 250 w sub speaker?
HI, I could not find the transistor of
2SD718 Transistors x 2
2SD468 Transistors x 2
2SC4793 Transistors x 1
Do you have alternative suggestions?
Yes, you can replace:
2SD718 Transistors x 2 = Yes
2SD468 Transistors x 2 = Yes
2SC4793 Transistors x 1 = No (because it only has 20 watts) !!!
Before replacing transistors you should look up: Datasheet all transistors
@@ShareTechCreative For the yes items, which data is important in data sheet? MHZ or pF, Hte? Can we use bigger V and Amp?
@@akkemik Yes, you can
Na falta dos capacitores de cerâmica poderia usar os eletrolíticos de baixa potência
I have a power supply of 15VDC/6A, ¿How many watts can i get using 8 ohms speakers for left/right channels and 4 ohms for subwoofer channel?
You can use this power supply
@@ShareTechCreative I have other power supply of 19 Volts at 2.37 Amps, ¿Can i use it?
@@severinoalcantara9533
The power supply of 19 Volts I have not tested, you can refer to other circuits that use 19 Volts power supply. Thanks
có siêu trầm thật ko hay còn giọng hát.
puedo usar el 2sa1943 en vez del D718?
2sa1943 is PNP transistor, D718 is NPN transistor
Hi! Can you put Electrical Circuit Diagram for this Amplifier, Web link, beside Part list, please? THANKS VERY MUCH IN ADVANCE! Dean Simic, an Electrical Engineer
Dean Simic
Thank you for your interest in this amplifier circuit, I will send you a message when the diagram is drawn finish
There is already a diagram link below the description
Thanks
Thanks. Very good. Diagram? or Squematic? Please.
In the description
@@ShareTechCreative Design ?
Try again??? Please...
photos.app.goo.gl/ubqx99V2qDDU8W3e9
que otro transistor puedo usar en vez del D718?
Look up the NPN transistor datasheet from 80w to 120w
Bhai ye kitne watts Ka hai?
Oiga bro y no tiene uno que sea con entrada de mic y con.. el modulo
I can't find the three transistors. Which transistor should I put in front of them?
1) 2SD 718
2)2SD 468
3)2SC 4793
PLEASE SIR REPLY FAST AND EXPLAIN
You look up the datasheet of the transistors and replace the equivalent transistor. Thanks
For example:
_ 2SD718 is replaced by 2SC5198, 2SD1047...
_ 2SD468 is replaced by 2SC2383, 2Sc2229 ...
_ 2SC 4793 is replaced by 2SC2073, 2SC4382...
I can't find the 2 capasitor.which capasitors should i put in front of them.
1)0.047uf
2)0.15uf
Pleas sir last time explain
Thank u sir
Tem alguma coisa errada. Bombas descobrir. Tentar usar os 2n3055.
hello, good morning, can you help me, the resistors are heating up a lot,
You're can add heat sink for resistors
Sound Good. You can share diagram, Thanks.
There is already a diagram link below the description
Thank you
@@ShareTechCreative Thanks! Wish you successful and glorious!
selam videolarını zevle izliyoruz senden rican ben 2 tane 5200 ve 2ane 1943 var bunları degerlendirmek istiyorum bununla ilgili video yaparsanız svinirim
Muito bom esse amplificador que vc acabou de ensinar a fazer eu gostaria de saber como faço pra mim comprar esse dispositivo de via bluetooth
Hi. Will this work fine with 4ohm speakers?
Yes, can
@@ShareTechCreative Thanks. You should consider selling kits with all the stuff in.
Same circuit the ab amplifier ready ok thanks
Yes 👍
How to increase amplifier watt
sometimes a diagram is necessary. but beautiful
Schematic diagram 2.1 channel I have not finished drawing. When I upload I will message you. Thank you
There is already a diagram link below the description
Salam ...can I use speaker 300 w/8ohm
You can try them
Awesome... :D ... I havea lot of B778 / D998 / D2438 / B1587 ... Can I use them? Sorry for my english :)
Sure, why not: D998 yes
Note: D2438 is Darlington
Qual entrada de tensão!!
Erk
+12VDC/5A
the ceramic resistors
Also i have a power supply of 19VDC/2.37A.
Video tidak ada keterangan nilai resistor di setiap penempatan posisi pada sircuit,atau tolong berikan diagram nya, karena kami kesulitan?
The diagram in the description
@@ShareTechCreative schematic not a in discription
can you help me ? diagram please. thank's friend
Check description
💗👩💻💗👩💻💗👩💻⭐
could do that same project by adding an a1943
Can
Hi sir, can u put diagaram amplifier?
There is already a diagram link below the description
Thanks
🙋♀️🙋♀️🌹
Plodovi Prirode
Thank you, my friend
Sir please ek r confiusion he
0.047uf
0.15uf
I don't understand your question?
Sir,im the one who follow and subscribe your all videos,can you show the schematic diagram 2.1 channel L n R with super bass..thanks..
edward galao
Schematic diagram 2.1 channel I have not finished drawing. When I upload I will message you. Thanks
There is already a diagram link below the description
Please provide me this products PCB print
No se podría tener un diagrama
You check the diagram on Description
Im not satisfied your tutorial because ur not gaving name like components connection every step..
I like your circuet clear sound
Sorry for that
Diagram, please.
Diagram link below the description video
Pdf upload brother
Check description