Nice work Gav. I actually just started using an airbrush because I am tired of flooding bodies. Literally use no paint with an airbrush. Appreciate all the tips and thank you for the longer video. I know the analytics don’t like the long ones but we sure do.
Truly a work of art my friend. I actually own 7 crawlers/trail trucks but you convinced me to also go back, and to start collecting these amazing cars. With Tamiya, you can never go wrong. I subscribed to your awesome channel.
A compass cutter is handy for arches, you can score cut up to an snap or can get one one perfect circular cut . Even if the arch isn't perfectly circular set up the compass to cut the highest point of the arch which leaves some small area to trim either side which is easier as you don't have to try get scissors at a weird angle at the top of arch.
Great video on body painting!! Your masking tip is the same as what I do too 😉 Would be great to see more of this type in the future as doing up bodies is always a challenge. More tips and perhaps showing more of the techniques used would be very helpful too!! 👍🏻
The black strip on the doors can the whole thing be put on and the square decal with the number 2 on it be held up to it and used to mark the black strip for cutting out that section so to remove it and them stick down ur number plate. That way u get ur door jam cuts in the right spot?
Great work Gav, the GT4 is one of my fave rally cars, i need to do an escort cosworth in repsol colours, but as im going to run it in the iconic cup, i wont be doing it to this level of detail. Will get trashed 😂
Gav I keep saying learn to use a air brush. I do all my cars with one, doesn’t have to be a expensive set up for RC body’s but trust me the results are way better than a rattle can when your doing detailed parts esp the amount of masking not needed Top job still looks 💯😍👍
I thought I'd made a mistake and cut the mudflaps off but you've done the same. Not sure if they should be on or not, but I might get another body and cut less off the arches
I used to use the cheap masking for the rest of my bodies and never again id rather pay more for tamiya masking and just use that all over but still looks great
I have a Tamiya Toyota Celica R/C car. My car has a much newer chassis. I also got a Tamiya pre-painted body separately. I did not think that I could paint a body like that. Thoughts?
you are way more patient than i am. even with the small flaws it looks amazing. if it looks good from far away, i am happy with it since i burn out and fly before anybody can see my weak paint job anyway! when i was a kid, tamiya had paint markers that made the edging a bit easier, so I used those things. haven't seen them in a long time, but i think they were a bit hit or miss anyway, which is probably why i don't see them anymore. still they helped me out a lot especially in the corners!
Nice work Gav. I actually just started using an airbrush because I am tired of flooding bodies. Literally use no paint with an airbrush. Appreciate all the tips and thank you for the longer video. I know the analytics don’t like the long ones but we sure do.
www.youtube.com/@GavinEvans1
Truly a work of art my friend. I actually own 7 crawlers/trail trucks but you convinced me to also go back, and to start collecting these amazing cars. With Tamiya, you can never go wrong. I subscribed to your awesome channel.
Welcome to RCKicks 👍🏻👍🏻
@@RCKickschannel thank you sir. Greetings from Texas.
A compass cutter is handy for arches, you can score cut up to an snap or can get one one perfect circular cut . Even if the arch isn't perfectly circular set up the compass to cut the highest point of the arch which leaves some small area to trim either side which is easier as you don't have to try get scissors at a weird angle at the top of arch.
Oh wow. I had this car when I was a teenager
Did you finish building it? It’s a bit of a handful I must say.
This is a fantastic instructional video. Thanks a lot.
Hello, fan! 🔝🆙🆙
Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a text to me on telegram to acknowledge your prize🎁
Fair play Gavin. That is alot of work. I thought it might have been decals! Old Skool Tamiya were not easy!
Well done Gavin, nicely done👍👍👍👍
You've made a damn good job of that Celica, much better than I could have managed. Nice one!!
Vary challenging. Still looks great. I couldn't do better. That's my favorite Tamiya chassy.
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁..
Great video. Guilty of being one of those who doesnt go back to old 'how to' videos.
great tip about using the thin masking tape on the outside as a guide for masking the inside
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁....
Seriously good video. I got the worst ghosting on a Tamiya Toyota Gazoo Yaris! Your Celica Looks so good
Great vid, cheers mate!
Nice paintjob. It's always a pleasure to watch you doing it. Even with a little experience I can still learn something. Very cool.
www.youtube.com/@GavinEvans1
good job, looks like a Marlboro packet
Nice work Gav 😎
Nice paint job. The car will definitely look good on display on the shelf.
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁...
Your tips and tricks are brilliant Gavin! Thanks!
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁......
Feels like Gav is getting closer to the camera with every video. 😆 Ta01 celica looking gorgeous!
You love it ;)
This is some great value content right there 🫡
You’ve mad a lovely job of this looks brand new awesome job 👍🤩🚴🏅
Hello, fan! 🔝🆙🆙
Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a message to me on telegram above to acknowledge your prize🎁
Sometimes the simplest looking paint jobs can be some of the most difficult ones!!
100%
Great video on body painting!! Your masking tip is the same as what I do too 😉 Would be great to see more of this type in the future as doing up bodies is always a challenge. More tips and perhaps showing more of the techniques used would be very helpful too!! 👍🏻
I think you will like tomorrow video on the full Pro Cat build and paint
❤love it.. one of my favorite bodys... so happy tamiya is coming out with pre painted body because my painting skills are horrible lol
Thank you for this! Some great tips that will come in very handy when I paint my next body. 👍
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁
Great video Gavin! What a job, but it's a beauty!
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message to me on telegram above to acknowledge your prize🎁
Beautiful !
Bloody friggin fiddly isn't it...????
It looks smick....
Thanks for prep work.
What an awesome editorial video ❤ I have learnt so much watching your build and paint videos, and feel I get better and better for each kit 😊
www.youtube.com/@GavinEvans1
Super Arbeit 👍👍👍 sieht richtig gut aus die karosserie gute Arbeit.
Hello, fan! 🔝🆙🆙
Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a text to me on telegram to acknowledge your prize🎁....
The black strip on the doors can the whole thing be put on and the square decal with the number 2 on it be held up to it and used to mark the black strip for cutting out that section so to remove it and them stick down ur number plate. That way u get ur door jam cuts in the right spot?
Great work Gav, the GT4 is one of my fave rally cars, i need to do an escort cosworth in repsol colours, but as im going to run it in the iconic cup, i wont be doing it to this level of detail. Will get trashed 😂
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁.
Great job!
Recently finished the paint on a GR86. Took weeks to get the masking right but got there in the end. Feel your pain on this one.
Message me on Telegram I have a package for you
Gav I keep saying learn to use a air brush. I do all my cars with one, doesn’t have to be a expensive set up for RC body’s but trust me the results are way better than a rattle can when your doing detailed parts esp the amount of masking not needed
Top job still looks 💯😍👍
I have two already. The issue currently is I don't have a location to use an airbrush.
Amazing work! If you want to part ways with that original body Id love to add it to my collection.
Hi gav.... what's the best method you've found to sand bodys after cut out. Cheers
Hello, fan! 🔝🆙🆙
Thanks for reaching out congrats 🎁🎊🎉You Won a Prize Cheerful send a text to me on telegram to acknowledge your prize🎁.
I thought I'd made a mistake and cut the mudflaps off but you've done the same. Not sure if they should be on or not, but I might get another body and cut less off the arches
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁..
I used to use the cheap masking for the rest of my bodies and never again id rather pay more for tamiya masking and just use that all over but still looks great
What’s the go with that mechanical speed controller? That looks so vintage!
It's a restoration.
@@RCKickschannel sorry, just interested
i still have one of these XD
XD is the way to go lol. Same for the Fat Fox.
I have a Tamiya Toyota Celica R/C car. My car has a much newer chassis. I also got a Tamiya pre-painted body separately. I did not think that I could paint a body like that. Thoughts?
This kit was released twice and the second version came out on a newer chassis. You can find info about it on Tamiyabase
@@RCKickschannel Thank You
I'd love to see a video of your parts bin?
One day
This looks like such a pain. That’s why is stick to pre painted bodies.
Paintkiller from carson will help .. next time
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁..
not buying another Tamiya kit until they start making Touring Super Slixks againg
Hello, fan! 🔝🆙🆙
Thanks for reaching out congratulation 🎁🎊🎉You Won a Prize Cheerful send a message above to acknowledge your prize🎁
@@GavinEvans1 hello thanks
@gavinevans1 isn’t me.
you are way more patient than i am. even with the small flaws it looks amazing. if it looks good from far away, i am happy with it since i burn out and fly before anybody can see my weak paint job anyway! when i was a kid, tamiya had paint markers that made the edging a bit easier, so I used those things. haven't seen them in a long time, but i think they were a bit hit or miss anyway, which is probably why i don't see them anymore. still they helped me out a lot especially in the corners!
I wish you could still get the paints and pens as it helps sometimes.
Molotow pens can be quite good