Ep. 17 This Old Dresser was Trashed
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- I purchased this 1960's Mid-Century Ward 6 Drawer Low Boy Dresser for $20 from Facebook Marketplace. This piece has mostly Walnut veneer with Elm trim. The top of the dresser is Laminate. I will be adding a Walnut veneer to the top of this dresser, and finishing the piece with General Finishes Nutmeg Gel Stain. This project will be donated for a local charity auction to benefit Big Brothers Big Sisters of Dane County. Thank you for supporting the channel.
#furniturerestoration #vintagefurniture #furnitureflip #midcenturymodern #midcenturydresser #madcitymodern #madcityrestorations #dressermakeover #furnituremakeover #paintstripper #vintagedresser
Project Update: This Dresser Sold at Auction for $600. Thank you for the support!
Big Brothers Big Sisters of Dane County Charity Event: one.bidpal.net...
Here are ways you can help support the Channel:
PATREON: / madcitymodern
Amazon Wishlist:
www.amazon.com...
Buy Me A Coffee
www.buymeacoff...
Follow Me On Instagram!
/ madcityfurniture
Follow Me On Facebook
/ madcitymodern
Send a Postcard from your City, or send a product for me to feature on my next video.
Mad City Modern
P.O. Box 7695
3902 Milwaukee St.
Madison, Wisconsin, USA 53707
Check out over 500 apparel designs in my new Etsy Shop:
www.etsy.com/s...
SUPPLIES USED:
For The Love Of Old Hardcover Book: amzn.to/2XES7YH
ALLWAY 6 Piece Scraper Set: amzn.to/3z50WrB
FLAT BAHCO CARBIDE SCRAPER: amzn.to/2VAbYY5
KRUD KUTTER DEGREASER: amzn.to/2X8KTLV
TitleBond Wood Glue: amzn.to/2Xx5IkX
Wood Glue Syringe: amzn.to/2VC504J
Applicator Sponge Set: amzn.to/3hrKRpX
Black Nitrile Exam Gloves: amzn.to/3k3C8fh
SHOP TOWELS: amzn.to/3hpuES9
3M RESPIRATOR: amzn.to/3C6AmAi
FURNITURE ROLLERS: amzn.to/3EcIbWC
NON-ABRASIVE PADS: amzn.to/392dIME
HOWARD WOOD POLISH & CONDITIONER: amzn.to/392ljuW
5 INCH ORBITAL SANDING DISCS: amzn.to/3ntSPm3
DAP Contact Cement: amzn.to/3zsEb0B
Veneer J-Roller: amzn.to/3tTDOv4
Walnut Veneer: amzn.to/3EyYbm4
Flush Trim Router Bit: amzn.to/3nJxiWN
Foam Paint Roller: amzn.to/3Ak1lro
General Finishes Gel Stain NUTMEG: amzn.to/3EuQ9uD
DISCLAIMER: Most Product Links are Affiliate Links, and I may receive a small portion of the sales at no extra cost to you. Always follow proper safety procedures when working on projects and read warning labels on any new products you're using.
As a therapist I usually recommend my folks change their mindset from striving for perfection, because perfection is not attainable. I encourage them to strive for excellence which is possible. So although the old timer at the wood store had a good idea, I would recommend tweaking it just a bit. It seems to reduce the stress and self criticism people experience. I love your videos and find your thoughts on community and life in general very uplifting and relaxing. I will probably never refinish any piece of furniture myself, but I’ll keep watching you do it! Take care and be well.
This is great feedback. Thank you for this support! Treasured. Barry
Laurie, in my culture, we say that one cannot create perfection. Only the Creator can. Whether that be God, Mother Nature or something else is up to you. Master weavers and other artists purposely put in a “flaw” to assure their work isn’t “perfect.”
I find that really comforting. I’m a Coast Salish Native in the Pacific NW. And yes, I always try to be perfect. Lol
As a teaching artist, I tell all my students that thinking can be overrated. It's better to learn from mistakes than to fear trying.
I'm always frustrated as I'm never satisfied with what I produce (knitting, embroidery, sewing, painting, carving, creating things with whatever I find in nature, working with epoxy, etc...). I cannot forgive me any mistake. And as people appreciate what I make, well, I think they are telling lies.
I should follow your advice, as a therapist, but I'm not able 😮
I'm not a rational person, emotions and sensations has been guiding me in my life.
Anyway handicraft cannot and mustn't be perfect, that's the value a handmade object adquires.
Don't apologize for showing the prep work. I, for one, appreciate all the work that goes into a piece.
Thank you Sandy. I appreciate the support. Barry
I’m 75 and love the whole concept of donating your piece to a charity. God Bless You🙏🏻🙏🏻🙏🏻💕💕💕
Never apologise for showing the prep!! I enjoy watching you work & it satisfying for me to watch the process. It makes me appreciate the end product even more. 💪👍🏼
Thank you Lois. This comment means a lot! Barry
I have always felt 'life without humor isn't worth living' - I have to find a reason to smile every day. I was totally surprised when you stated 'the cameraman has been reassigned''. I appreciate the zinger. Definitely a fabulous piece, also for a very good cause.
This made my day
You are quickly becoming a strong force in the TH-cam restoration world. I greatly admire that you do your best to support your local market I try to do the same when possible. Many friends have been made that way. Let us know how the charity event goes.
Thank you Melanie. I learn so much from your channel. When I try something that I've learned from you, I will try to remember to give you a shoutout. I have several vintage keys to restore, and the first thing I thought was, soak them in a ziplock bag overnight
I have depression which gives me horrible insomnia, and lately I've been watching your videos to sleep. It's soothing watching someone clean up furniture and it definetly helps me sleep.
I mention this often in my videos. So glad this has helped! Barry
Impressive! I’ve never done a large veneer piece. Only the edges. 😍👌
Thank you. I was nervous to try it since I have never done it either. No better time to try. Barry
@@MadCityModern I know where to look for advice now 😉
I am always looking for advice as well
Wow! My 2 favorite furniture guys having a conversation. I always look forward to both of you.
@@citygirljody 😂 thank you and yes, we do talk 😉
Wow!!! Great job Barry!
Thank you. Hope this one benefits the charity. Barry
Beautiful as always Barry. Can't believe you knocked your camera over haha
I think it's important not to skip over too much of what's involved in flipping/restoration. There's a lot of misconception that what we do is easy. Have seen a lot of people attempt these things as a hobby and throw in the towel when they realized it's more than just throwing a coat of paint on.
Thank you for your transparency
You are right! So much work goes into refinishing these pieces properly. The gopro has a solid case and gets knocked over often : ) Barry
Another excellent video, Barry. I like the nutmeg stain, rosy & warm. BTW, You never need to apologize for repeating steps, I find the rhythm of your process soothing, a little bit of tranquility in crazy world of stress. I can’t be the only one… Your explaining in such a calm voice is very informative even if I never do these projects myself, (lol)… thank you 😊
Thank you for your encouraging words. You made my day.
Barry
I like seeing the process! I don’t mind repetition. In fact I find it soothing. Plus I learn/retain information better with repetition!
I appreciate this
Who ever won the bid, won a treasure! Great job!
Thank you.
Barry
OH, MY GOODNESS!!!!
SUCH A LOVELY DRESSER!!!!
THANK YOU FOR YOUR GENEROUS AND BEAUTIFUL CONTRIBUTION!!!!💖💖💖💖💖
This was a fun one
Whoever gets this piece in the charity auction is one lucky recipient indeed. This turned out insane! I've never done veneer before and you made it look so easy to apply and trim with the right tools. Hooray for supporting local business too. I'm a big fan of our local Ace Hardware. Incredible job as always Barry!
Thank you for the words of encouragement. I was excited to be part of a much bigger project. So many giants donating to that auction. I'm just the little guy : )
Just turned out beautiful I've never seen the veneer being done in a full piece and you made it look easy great job love your DIYs and yes I will be watching all your advertisements to help you with your Channel have a great day and God bless my dear friend thank you again for sharing
Thank you so much for the support Cathy. You are always one of the first to comment. Barry
I love the prep part too don't apologize for showing it!!!!! It's relaxing 🌷
Great feedback!
What a wonderful restoration. Though Ward is easy to find, there is a reason they have been in production for almost 75 years, quality of construction. Someone was lucky to nab this at an auction for charity . I liked the nutmeg stain on the walnut veneer , it elevated the warmth of this piece.
Thank you, Keith.
Barry
Lovely as always. 👍🏾 Pensacola Florida 🌴🏖️
Thank you Rhianna. Glad you enjoyed it. Barry
As a regular watcher, I enjoy watching the scraping and sanding over and over. It's part of the process, and it is actually quite enjoyable to see. 😊
This is great feedback. Sometimes I feel like I show it too much, but really it is the longest part of most projects. Thank you Hannah
Great result!! You made that veneer application look easy!
Thank you. I have learned so many things from watching others do it. So glad it worked out well this time. Barry
It's amazing how kind people can be in gifting you so many useful tools and products. Wow! The piece turned out amazing. Enjoyed watching you do the veneer. You sure made it look easy! I enjoy watching the prep btw.
I am so grateful for all the ways people have shown support. Even the wonderful comments lift me up. Thank you for the support. Barry
Great job. I’m sure someone has mentioned, but when routing an outside edge, you should move the router counterclockwise and clockwise for an inside edge (like for a sink). Awesome job though!
Thank you for sharing. I did another recent veneer application, this time working counterclockwise and it went much better. Thank you for this advice. If you have other suggestions, please let me know. Barry
As a drywaller I approve this message
I came to say this, the bit should always be spinning away from the material. So as Mike said, when the Router is between you and the work, move from left to right (never go back in the direction you have just made a pass on) when you get to a corner continue "around" it. When the material is in the middle, as in you, the material then the router Move right to left - Mike will correct me If I'm wrong, I just learnt this about a year ago so I'm a novice too
Beautiful restoration! I like seeing the prep work. It never gets old.
Thank you Mary. I am often afraid to add too many details. Don't want viewers to get bored : ) I appreciate the support. Barry
Very therapeutic taking something old and discarded and bringing it back to life, another great piece keep it up.
Thank you Noel!
I love the pride you take in every piece of furniture you restore 👍🏻
Thank you Andrea
You do not have to explain to anybody the kind of money you make on those pieces. You create wonderful pieces of real furniture, no plastic throw away junk, and you get paid for what your work is worth to people. If you make a million a month or 100, it is nobodys business. Try to buy quality furniture today and see what you pay for it. You make out of old quality furniture that some people didn't appreciate and made master pieces out of them, pieces you should be proud of. I am very proud of them and wish I had one special piece 😊. I enjoy watching and so do lots of people. Thanks for the video!
Thank you for the support, Connie. Well said.
Barry
This turned out beautifully. The veneer top is gorgeous. Whoever get this piece is very lucky indeed.
It is interesting to see the state of wood behind the sanding. It is beautiful to look. Staying zen.
That is just beautiful, the lucky person who bought it will appreciate it so much!
Thank you Julie! Barry
Never apologize. Your work is amazing!!!
Thank you Cindy
The wood has such a depth to it now. And removing the laminate top really improved the look of this piece. Good new beginning.
Thank you Lissa
Stunning! It’s absolutely gorgeous!!!!
Thank you Ann! I appreciate seeing your comments. Barry
Beauty and character of the wood shines through thanks to you
Thank you Laurie
Aw you really breathed life into that beautiful dresser. Well done. Great to see the new veneer going on. I don't think I've seen anyone put on a full sheet before. Seen lots of repairs of little pieces but nothing like that. Well done Barry. Another great restoration in the bag. Oh, and I LOVE your giraffe. Real beauty.
Thank you Emer. The giraffe has a friend that may show up in another video : ) Love collecting pieces like this. Thank you for supporting the channel. Barry
@@MadCityModern Oh cool. I look forward to seeing the giraffes friend at some stage so. Always a pleasure Barry.
Actually, I find it relaxing to watch you strip and sand. 🤩
That nutmeg is a beautiful color. This piece is awesome 👏
I need to try it again
I also buy from local hardware and ace hardware. We live in a small town and we like supporting them.
I find so many specific items I need at Ace
That dresser is so beautiful! I very much appreciate your showing how to work the router. I have been on a mission to get power tools for my workshop (garage sales, estate sales, pawn shops, etc...), learning how to use them is the next step 😁. Thank you for this video!
I appreciate this comment. I am also learning as I go, so i realize the importance of showing some of those steps, rather than just a shot of me using it. Let me know if I can help in any way. Barry
Such a beautiful old piece. I'm glad to see that you gave it the respect it deserves. A great job with the veneer. I'm sure this piece will do well for the charity event. Well done!🙂👍
Love this comment. Thank you Holly! Barry
I just cracked up at the glove shot! Well done with the veneer, it turned great.
I've spent years perfecting that shot : ) can't let the skill go to waste.
“Cameraman has been reassigned” lol
Working my way thru your videos. Love them.
Glad you like them! Thank you.
Barry
The Universe provided a beautiful piece of furniture for you to restore!!! Excellent finish!
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you very much!
I love Mid century furniture. Well done. Xx
Thank you Juliana!
Better than 'just okay' - attention to detail is outstanding. Well done!
Thank you. Love that you caught that. Barry
The sanding is one of my favorite parts, I could watch close up of the orbital sander all day, very relaxing and seeing the changing wood makes me happy.
I love this message! You totally get it. Thank you. Barry
For the love of old...beautiful...thank you for this upload
Thank you so much
You don't have to explain. Just do your gorgeous work. I love it
Thank you. I appreciate this
That nutmeg looks really nice on that dresser. Thanks for the information on how to use the router. Always been curious but a bit leary of picking it up to use, what if I mess up beyond repair. lol I hope that whoever got this piece enjoys it. Have a great day
Thank you. I can't wait to use the nutmeg again
You’ve videos are getting me through my 12 hour shifts at the hospital
Wow. This is amazing!
*Great job! You continue to amaze me with your instrument). Awesome!*
Thank you. Always trying to learn. Barry
@@MadCityModern Yes!
This was awesome to watch, but the glove hitting the camera was super fun! 🤣
Thank you. It was fun.
Barry
thank you - your work is always top notch. i crochet baby afghans for our local Children's Home here in Longmont, CO. We both care about the children.
I really love this comment
Dude, I just noticed you are RIPPED! What type of workout do you do to keep in such great shape? I love what you did with this piece and it's so nice that you donated it for your local charity. ⭐
I just stay active and eat healthy. Nothing crazy really : )
@@MadCityModern I know you're telling a story... LOL I've used Keto and basic bicycle. You look like you run. I do look forward to your videos. You do amazing refinish work.
What can I say? Santa give you the "thumbs up" he knows what he is doing.
Birdy
Thank you Lisa. I had to add a little excitement in there : ) The thumbs up was for the lucky curb find. Thank you for the support. Barry
Of course it came out great. Thanks for showing the veneer application. I have piece I may do that with. And I love scrapers over sanding to death! LOL
Thank you. I completely agree. I am loving the scrapers these days. Maybe a sponsor soon : )
I really like the nutmeg. It has no yellow in it and the candlelight does.
That fridge in the background is bomb
Thank you. My grandmother bought it new in 1951
You packed a lot into this video ! Love your attention to detail . Another amazing refinish . I can’t even believe you found this beautiful piece of furniture for 20$ . Great job !
Thank you Deb. I was so excited when this sold at the charity auction for $600. I will be sharing the news in a video this weekend. Barry
@@MadCityModern oh my goodness !!! That’s pretty cool ! So satisfying!
I agree. Thank you for asking!
Howdy neighbor! I live in the milwaukee area. Thanks for repping the WI area with this wholesome content! Thank you for the inspiration!!
Love this! Thanks for the comment!
My dude, i just disabled my ad blocker for your channel. You are the chillest and I love it.
Wow! Thank you!
great job, and good for you for shopping local. I know it's more expensive so I think that's very nice of you.
I always benefit when I return to those places and see familiar faces. Worth every penny
Last night bought an antique dresser and matching vanity at an auction for 1 dollar each gonna try to refinish thanks for the instructions in your videos
Love this. Let me know how it goes
Hard work but boy it was worth it well done, during Lockdown flicking through You Tube I saw Annie Slone paint as I was about to get 2nd hand bedroom furniture I got her paint & painted it all white well even thought it was hard due to a bad back I plowed on & on & on, when finished I cried with tiredness & pride soon I'm going to start on a little table & take paint off & do what I've learnt from you so fingers crossed please carry on with your fabulous work the results are just beautiful I'm from Bracknell 5 miles from Windsor Castle 3 miles from ASCOT England 🇬🇧
Thank you for sharing this. I love seeing that others are just as passionate about projects like this
Wow! That nutmeg color is beautiful!
I need to try it again
I hope you have a sleeveless winter coat to go with those shirts. 🙂
I may not survive
For me, the best part of your videos is the sanding...so no apologies necessary 😁
Thank you
Reminds me of my Mom's dresser. I have some pieces with lamimate that I want to veneer so looking forward to seeing your technique.
Thank you for sharing, Phillip.
Barry
Learned this from an old friend. Cans of paint or anything similar. Make small nail holes on the inside rim, excess will drip back in the can.
Awesome suggestion. Thank you!
LOOKS SUPER NICE! GREAT JOB! I WOULD HAVE LOVED TO SEE THIS PIECE TWO TONE THO! DRAWER FACES A LIGHTER STAIN! 👍🙋♂️⭐⭐⭐⭐⭐
I agree. I would have loved to try a two tone style for this one. I will be for another shortly : ) Thanks for the great feedback Johnny. Barry
That is sensational! Looks like a entirely brand new piece. Your devotion is evident. Most people would've cleaned it and maybe slapped on a coat of paint and called it done. Thank you for showing all the steps including the prep. It is crucial. 🙂
I love your feedback as you watch these videos. Thank you Kate
Thank you for making them.
This piece has a modern feeling twist on a bachelors chest.
Thank you Valorie
Love watching someone go about their passion with skills to match.......put a pin in Liverpool, England for me buddy 🍻
Thank you for the awesome comment. I am learning every day. I have added Liverpool, England. Barry
Love the Nutmeg. Fabulous color.
Hi Peggy. First time using it. I liked it as well
Refinishing an American of Martinsville - 3 drawer as I watch this. The prep takes forever but worth it!
One of my favorite furniture companies. Love it!
Bonjour Barry! What a nice piece! Your veneer top turned out perfect! This person in need will be very happy to have such a nice dresser... Congratulations on the success of your channel! Have a wonderful day. Christine 🇨🇦
Thank you Christine. I'll always remember you as one of the first supporters. I can't thank you enough. Barry
Good tip on checking out over painted furniture.
Thank you!
I like the nutmeg stain. Congratulations on a good job.
I am looking forward to using it again soon. Barry
Congratulations!!! You have great thinking and good ideas. May God bless your generosity. Many blessings and much success. 🤗🤗🤗
Thank you! I appreciate the support. Barry
Thank you for the router demonstration.
Just acquired one.
Beautiful work.
Let me know how it works out
I really enjoy all of your work. Thank you for all you share.👍🏼💙
Thank you for all your comments
Looks great! I watched the commercials!
Awesome! Thank you for the support Tim! Barry
Good observation that 75% of the work is prep work. I find that holds true in much of life. At least in my life, any project - whether professional or personal - is heavy on the prep end. Prep work often isn't fun or exciting, but it's what makes bigger payoffs possible. Great comment with universal application.
I completely agree with this and I'm so glad you caught it. I started enjoying all of the prep work for most of these projects and I have applied this to so many other areas of life. Thank you for the support.
Great video Barry! It looks amazing! You gave it new life. I'm inspired to start working on my Ward in a few weeks. I used your links and ordered the Carbide scraper and scraper set 😊 I also have to replace the veneer trim on the top of my dresser. I'll be referring back to this video. Using a router was a great idea!!
Thank you! I can't wait to see you take on this project. I love how you aren't afraid to try new things. Let me know if you have questions. Barry
beautiful i like vintage furniture but make it modern and combine it with black edges try it you will see that those 2 colors combine well and sell well
I think you'll see I've done that in other videos. Hope you enjoy
Truly beautiful, so happy you honor and restore, not paint and stencil your pieces.
Thank you Pam
its so simple and beautiful, just love it
Thank you! 😊
Loved the hanging plant over the giraffe! LOL Very clever placement. Reminded me of a piece of mural art in Oakland CA, with giraffes painted up the pillars of an overpass, with Ivy growing down the sides where the giraffes were “eating” it. LOL
Nice job! Great job on the veneer! We had those wood and metal flying ducks on the wall behind your reveal when I was a girl in the 50s. They were in our summer bungalow. Takes me back!
I love the nutmeg color! 😍😍
The reason the router reacted as it did is the direction you were going as the cutting tool (bit) is turning clockwise, you need to have the work piece on your left as you move forward. In other words, the blade will be turning in the opposite direction of the cut. I'm sorry if I'm not articulating this very well. Just make sure you move the router in the opposite direction you did in the video. There. That was better. I really appreciate you folks doing this work. You've taught me a lot.
Thank you for the info Mario. Several other viewers provided the same advice and have done a few veneer videos since. I appreciate the feedback and your support on the channel. Barry
@@MadCityModern I was going to comment about this same issue as well but I looked of anyone had done it yet.
Not just for veneer but for any application always move the router counterclockwise.
Absolutely stunning! And another great job!
Thank you Frankie
Such a lovely, warm color.
Thank you. I really like it.
Barry
I really enjoy your teaching style and clear video! I wish you continued success with your channel!
Thank you for the support
Classy! You go way beyond just ok. About as close to perfection as you can get. Really cool adding the veneer on top. Really makes the piece!💗💗💗
Thank you Jim and Cindy. I love watching others try new things, so I have to keep doing that myself. Barry
Beautiful. What a joy for the charity 😃🙏🏻💕
Such a beautiful chest of drawers, that warm orange tone would fit perfectly in my Homeoffice ! Bad, that I live in Europe and not next to you! That change of the vernier was so nice, and you made it looking so easy, all others use heat and ironing and do not ask what else….I think that glue and that roller is enough! That routerbit seems a little bit dull or you move it in the wrong direction , never see so much overstand after the use of it.. but the result is that what count, and the result once again is a masterpiece of furniture that get touched from a master of craftsmanship! I like really what you do!
Thank you Alex. I don't remember this project specifically. What I do know is that I have learned to use the router counterclockwise. I continue to learn new things every day. Thank you for the support
@@MadCityModern hello Berry, I learned, Against the direction of the rotation is the correct way to use the router , in this direction the bit cut off the overstand of the wood! Maybe the router that you own is different from the one I know…
You're right. I corrected this mistake in other videos. I've learned since
Watching you work is mesmerizing. Your attention to every detail. Gorgeous piece.
Thank you for the support! Barry
A piece of advice on the router...you want to account for the direct the blade is spinning. When trimming an outside edge go counter clockwise. Go clockwise if trimming inside an opening. You will get a much cleaner cut.
Thank you for this great feedback. I have since learned to use this method and it made a huge difference. Thank you
I like watching the prep work. I still learn some new techniques and mostly the products that on the market and your thoughts on it
Thank you Cynthia. If you ever think of a product that would make my job easier, let me know and I'll purchase it and review it. Barry