About to add this to my wife’s 99 2dr Tahoe 4x4 built 6.0 by Split Performance. Deciding either NNBS intake or TBSS as suggested by the builder since the stock one won’t add much power to it New Sub
i, dont know where you got the idea to plumb up the intake that way, but thank you and i definitely just subscribed.im working on a ls swapped 78 2 door fairmont,with a single turbo team z k-member, tubular front end and by spring a team z cage,detroit speed engineering through the floor subframe connectors.and mini tubs.
Congratulations on your subscriber milestone bro...I just reached 500 yesterday..I will definitely subscribe and tap in too your videos..I’m building a turbo 4.8 Silverado was looking at the tbss intake swap and came across your video 💪🏽
Hey man, Would you mind showing a video how you routed the lines for turbo, fuel etc with those PTC fittings on the intake. I cant seem to understand which each ones goes to and for what reason. I am new to the turbo side and want to do it to my S10
Thank you! Appreciate it. Fittings & hose are just some 1/4 push to connect. Drilled & tapped top of intake to 1/4 npt for 90 fitting & FPR is 1/16 push to connect 1/4 tube fitting.
Hey! I just picked up a new throttle body, but without the vent for PCV - would that 1/8 NPT you threaded in the manifold right behind the TB replace TB connection?
great video.. stumbled across it and looks like it makes sense ! any further tweaks that you found you had to do? and a questions, i am converting from DBW to DBC for simplicity.. what DBC bracket did you use? did you have a part number that you could share for a DBC bracket on a TBSS/NNBS intake?
I still run the exact set up over a year later & it’s been flawless! For DBC bracket, I used Glenn’s Auto Performance & cable is a stock Buick Rendezvous straight from Rock Auto. One side is GM style so it clips right in the cable bracket & the other is just a cable so you can cut it to your length & use a cable stop for the stock Foxbody pedal. Works great as well!
Which height of 1500cc snake eater injectors did you go with? Theres a few options but dont know which height is needed with that Fasster fuel rail and TBSS intake. Thanks.
@@BmoreFox right on man I’m doing a similar build for my s10. It’s good to find data an info on what people are doing that actually works! What are you running for tuner on it?
About to add this to my wife’s 99 2dr Tahoe 4x4 built 6.0 by Split Performance. Deciding either NNBS intake or TBSS as suggested by the builder since the stock one won’t add much power to it
New Sub
nnbs & tbss are the same intake
She is growing, keep it up!!!!! I can’t wait for you to come down it’s will be a hell of a time.
Me too man!
i, dont know where you got the idea to plumb up the intake that way, but thank you and i definitely just subscribed.im working on a ls swapped 78 2 door fairmont,with a single turbo team z k-member, tubular front end and by spring a team z cage,detroit speed engineering through the floor subframe connectors.and mini tubs.
Just something I did on my own. Thank you, appreciate it! Sounds like a nice ride you got!
Painted it gloss black looks great
Yeah I liked it
Congratulations on the 108 subscribers buddy. Thats a good looking intake manifold.
Thank you sir. Thanks for watching too!
Congratulations on your subscriber milestone bro...I just reached 500 yesterday..I will definitely subscribe and tap in too your videos..I’m building a turbo 4.8 Silverado was looking at the tbss intake swap and came across your video 💪🏽
Do you have a link for the rails?
@@MemphisTruckMafia fasster on eBay
^^^
Thanks for subbing. I’ll check your channel out as well bro!
That Looks super clean !
Hey man, Would you mind showing a video how you routed the lines for turbo, fuel etc with those PTC fittings on the intake. I cant seem to understand which each ones goes to and for what reason. I am new to the turbo side and want to do it to my S10
Top hole was for the tbe breather to the valve cover originally, rear port was also for the booster originally
I like the clean boost/vacuum reference to the FPR. Nice and clean and from the top looks good, where'd you get the fittings from? Intake looks great!
Thank you! Appreciate it. Fittings & hose are just some 1/4 push to connect. Drilled & tapped top of intake to 1/4 npt for 90 fitting & FPR is 1/16 push to connect 1/4 tube fitting.
Clean look
Why 92mm and not port the intake ando go 102mm? Just curious
92 is better for streetcars
Is a 2011 GMC Sierra intake manifold is the same intake on a Trailblazer SS
Pretty much
@@BmoreFox thanks
Hey! I just picked up a new throttle body, but without the vent for PCV - would that 1/8 NPT you threaded in the manifold right behind the TB replace TB connection?
Idk what you’re asking
would u mind sendin me a link to the FPR u got not sure which one to get n dont want to get the wrong one lol, TIA🤙🏽🤙🏽
Aeromotive a1000
great video.. stumbled across it and looks like it makes sense ! any further tweaks that you found you had to do? and a questions, i am converting from DBW to DBC for simplicity.. what DBC bracket did you use? did you have a part number that you could share for a DBC bracket on a TBSS/NNBS intake?
I still run the exact set up over a year later & it’s been flawless! For DBC bracket, I used Glenn’s Auto Performance & cable is a stock Buick Rendezvous straight from Rock Auto. One side is GM style so it clips right in the cable bracket & the other is just a cable so you can cut it to your length & use a cable stop for the stock Foxbody pedal. Works great as well!
@@BmoreFox excellent and thanks for
The quick
Reply!
Is it possible to put the short ls3 ev6 injectors on the tbss intake with those fuel rails?
I believe so
Are you using a 3 bar gm map or? Literally modeling mine off yours for simplicity and cleanliness. Great work
Yes I currently still am
And thank you!
Do you have a link to the ICT spaces for the fuel rail❓️
I don’t but they’re for ls1 style injectors. Actually this whole intake set up is for sale right now.
@@BmoreFox I just finished my tbss intake fixing to take it off for one that'll fit under my sn95 Stock hood
Will this fit a 6.0 gen 3 ls from a 2004 truck I’m ls swapping that’s why
Yup
Which height of 1500cc snake eater injectors did you go with? Theres a few options but dont know which height is needed with that Fasster fuel rail and TBSS intake. Thanks.
The tall ones ls1 style I think they’re called
I couldn’t understand what fuel rails you said Sir, mind linking?
Fasster rails on eBay.
@@BmoreFox thanks man
Did you need an adapter to run the new Bosch 210s on the tbss intake?
Also what style fuel rails are those? Are they the ls2 style rails?
Ls2 yes & no didn’t need adapters for the 48mm 210s
Do you have a link to the fuel rail and the fittings ?
On eBay Fasster fuel rails for TBSS
Where did you get your injector harness? I’m running a TBSS intake with 54 lb injectors have no idea where to get the harness
Holley EFI on my car
Maryland 💪🏾💪🏾 got my sub
🤘🤘🤘
Any links to the press fit vacuum lines and fittings
Amazon lol
1/4 inch push to connect
Where did you get you’re elbow Push locks from?
Amazon lol
Good video
Thank you sir
Which ICT spacers did you use?
No idea on exact ones but truck style I believe.
What kind of fuel rails are those?
Fasster on eBay tbss truck rails. Direct fit
Do you have the metal tabs that came with the intake that holds the intake cover ?
Yes I do
@@BmoreFox are you selling them?lol
I would lol
@@BmoreFox how much u asking
@@AdrianGonzalez-ew8gu make offer shipped
Year late but got my sub 👍
Thank you sir!
What size tap did you use where the breather was?
Pretty sure 3/8 npt
How is the set up doing since you have had it for a while now?
Still on there & everything has been working great!
@@BmoreFox right on man I’m doing a similar build for my s10. It’s good to find data an info on what people are doing that actually works! What are you running for tuner on it?
Holley EFI
Gave me some ideas!
Good I’m glad!
Who makes the fuel rails
Fasster
Can you hook up nitrous to these fuel rails?
Yes I’m sure you can.
What fuel rails are you using?
Fasster on eBay.
You got the part number for the spacers? Injectors
Any chance do you have an Instagram?
Yeah man it’s on the videos! @bmore_fox
Any chance do you have an Instagram?
Yeah it’s on my videos lol but @bmore_fox
@@BmoreFoxbro I’ve been following you on instead for fuckin YEARS. I never realized that car was ls swapped