I'm having trouble setting up this function. i already have two of these functions set up which have been set up by the company that sold me the machine. I imputed all the information exactly the same as on the other entries except with the new folder name and it fails the connection every time. Any ideas? the shared folder in on a disk station network for my small business.
I followed the same instructions on Kyocera M3415idn. But sadly it did not work out. However, I decided to use the computer IP address instead of the computer host name. It worked. Better yet, I configured my router to bind the IP address to the computer MAC address so the IP doesn’t change when a computer disconnects. It worked perfectly and was a permanent solution. The only thing I’m struggling with is scan to email.
I am trying to do exactly this but I am getting a connection error when testing connection? Any ideas? I really need this to work. I'm using Windows. Thanks!
How about kyocera 2551ci when the laptop or desktop is turn on and the next day ,all the scan connection that is connected before its all gone.and when i do it again it all connection error unable to connect it all
Our Kyocera stopped scanning out of the sudden. No changes were made recently. AD users look all good. The problem is we only get "Connection Error" when we do the test. Is there a way we can get more details on the error message to narrow down where the issue could be coming from?
Have any of you guys had an issue where the scanned documents won't get to an email if there are more than 60 pages? Giving the error 3101. However the other KYocera printers that are in the same network work just fine. Also, it just happens when is more than 60 pages.
Super Random, but if you end up getting a x1101 error code and you have made sure all of the settings are correct, check your ARP table. Turns out we had another device that got plugged in and had the same IP address as our printer and was causing this error to occur. After unplugging it, everything went back to normal. Hopefully this helps someone.
Ok so I’m trying to scan documents to file within a file in our shared driver. The first file connects but the one inside that one doesn’t connect. My scan properties doesn’t look the same and I’m not sure where I’m going wrong.
Great video! I can not connect to the command center via ip address. I enter the address and I get the site can not be reached and ERR_CONNECTION_RESET. Any hope would be really appreciated. I have another computer that is set up but can not reproduce the connection.
I had the same thing happen to me because I was using chrome, I had to use Microsoft edge and when it piped up that the network was unsafe you go To advanced settings and continue anyway.
Is the local user name here the name of the IT admin and their password for the Kyocera interface or is it the username & password of where the shared folder resides?
All scanners scan to PDF. You can covert to other format only with software for conversion on your computer. A Microsoft WORD converts to PDF but not always well.
@@chriscopieritguy7613 hello boss raheem72083@gmail.com my email address , I wanna ask you something I have a taskalfa 3212i scanning machine we are using in the company, when I tested connect is showing ok, when I scan it's going properly without showing any error but when I open scan folder there is no attachment please advise me to get rid out from this problem, second problem is on the other machine which is windows 7 am unable to contact with kyocera because it shows connection error, I applied everything still error please advise me
Hi, Thanks for the Video. Is it possible to scan to folder without Internet Connection? If possible, please share the configuration Video. Thanks in advance.
Works like a charm. Very clear, precise instruction!
Thank you so much for the perfect walkthrough!
Many thanks !!! Worked like a charm.
many thanks! your video helped me ! cheers!!!
I'm having trouble setting up this function. i already have two of these functions set up which have been set up by the company that sold me the machine. I imputed all the information exactly the same as on the other entries except with the new folder name and it fails the connection every time. Any ideas? the shared folder in on a disk station network for my small business.
I followed the same instructions on Kyocera M3415idn. But sadly it did not work out. However, I decided to use the computer IP address instead of the computer host name. It worked. Better yet, I configured my router to bind the IP address to the computer MAC address so the IP doesn’t change when a computer disconnects. It worked perfectly and was a permanent solution.
The only thing I’m struggling with is scan to email.
Try pinging the smtp server and use that iip address for scanning to email
I am trying to do exactly this but I am getting a connection error when testing connection? Any ideas? I really need this to work. I'm using Windows. Thanks!
How about kyocera 2551ci when the laptop or desktop is turn on and the next day ,all the scan connection that is connected before its all gone.and when i do it again it all connection error unable to connect it all
Thank you so much it worked❤. Followed the same steps on a TASKalfa 5004i and it scanned perfectly
do you have also instruktions for iMac OSX ?
Our Kyocera stopped scanning out of the sudden. No changes were made recently. AD users look all good.
The problem is we only get "Connection Error" when we do the test. Is there a way we can get more details on the error message to narrow down where the issue could be coming from?
hi, if you scan to a computer name and not to the computers ip address, you need to enter the correct DNS settings
@@rafip4220yeah, I tried that too.
i'm following your instruction till 4:13 but when it testing connection it always failed. why?
i'm sure its not cable problem because i can print from my laptop into the copier
Have any of you guys had an issue where the scanned documents won't get to an email if there are more than 60 pages? Giving the error 3101. However the other KYocera printers that are in the same network work just fine. Also, it just happens when is more than 60 pages.
Trying again. Getting an error message. What do I do now? I will try to find your 'about' area.
Works like a charm, thanks.
Tried the setup as per your instruction. It is showing connection error while testing.
I need help. How do I get you to remote into my computer to help me?
Hi i sit with a m3540dn did follow the step but it is not working wat can I do
Super Random, but if you end up getting a x1101 error code and you have made sure all of the settings are correct, check your ARP table. Turns out we had another device that got plugged in and had the same IP address as our printer and was causing this error to occur. After unplugging it, everything went back to normal. Hopefully this helps someone.
Hello I need a remote session to set this up on my printer. Thanks.
You can contact me through my email address on my TH-cam page
I own an IT business and have a client that wants to scan to an NAS drive... Is this possible wiit the Kyocera Ecosys M3145idn?
Yes it is, just need a shared folder . And a local user name with a password .
Thanks alot it worked! Legend
Do these printers have internal storage that I can story to and connect TO?
They do not
Excellent!!
Works good
I need help with setting up my Kyocera, it keeps telling me connection area. Can you help?
Sure, send me an email . Go to the about tab on my youtube channel
Hi Chris I don't see your email in the about page.
@@bighan8638 my email is beachcopiersfl at gmail dot com.
@@chriscopieritguy7613 thank you
Ok and how to scan 2sided ? :)
Ok so I’m trying to scan documents to file within a file in our shared driver. The first file connects but the one inside that one doesn’t connect. My scan properties doesn’t look the same and I’m not sure where I’m going wrong.
Rebecca Gehrman you probably need to add \ and the final file name
i liked the video because you have classic battlefront 2 on the bottom left of your desktop. yeah its a good video too ;-)
Yeah lol, I’m not only a nerd I’m also a gamer
Great video! I can not connect to the command center via ip address. I enter the address and I get the site can not be reached and ERR_CONNECTION_RESET. Any hope would be really appreciated. I have another computer that is set up but can not reproduce the connection.
I will be making a video on this new issue soon
I have the same
Issue
I had the same thing happen to me because I was using chrome, I had to use Microsoft edge and when it piped up that the network was unsafe you go
To advanced settings and continue anyway.
Hi, how do I contact you for assistance ? Thx
it worked, thanks much dude!
your welcome
after all this getting connection error
Make sure Ethernet cable is connected to your pc
I tired but when i click on Test, is come out with CONNECTION ERROR. May i know how what shall i do ?
Check sharing settings or firewall
Is the local user name here the name of the IT admin and their password for the Kyocera interface or is it the username & password of where the shared folder resides?
The username and password you use to log into your computer
Nice Video. Everything works now:)
Thank you for watching
It scans in pdf format how to change it?
All scanners scan to PDF. You can covert to other format only with software for conversion on your computer. A Microsoft WORD converts to PDF but not always well.
Super😍 Please make KFS and How to get Access code Video Love from India
I have followed these instructions and can not scan. No connection.
do it to a Mac os
what about scanning to a public drive on a server?
You will need the file path and a user name and login to the server . Either the server admin or a new user setup for the machine in active directory
@@chriscopieritguy7613 hello boss raheem72083@gmail.com my email address , I wanna ask you something I have a taskalfa 3212i scanning machine we are using in the company, when I tested connect is showing ok, when I scan it's going properly without showing any error but when I open scan folder there is no attachment please advise me to get rid out from this problem, second problem is on the other machine which is windows 7 am unable to contact with kyocera because it shows connection error, I applied everything still error please advise me
how to install scan software in Kyocera 4230 idn
print all there is no software for scanning
after login
Admin
Admin
Problem
404 Page Not Found
I will try this tomorrow
Sounds good
Hi, Thanks for the Video. Is it possible to scan to folder without Internet Connection? If possible, please share the configuration Video. Thanks in advance.
Not really, Internet is needed. Unless you dont mind scanning to usb drive and then take the usb drive from the machine and plug it in your computer
Hello Chris, how can I configure to email ?
I will make a new video
i followed all steps but it gave connection error
Check your sharing and firewall settings
I dont have lan cable ,I hae usb cable
Machine will not scan with usb
@@chriscopieritguy7613 I put the lan cable but, connection error...can you help me with anydesk?
Don't forget to make sure that SMB 1.0/CIFS File Sharing Support is enabled.
shhh
Will you connect with me and set up.
Sure, contact me on my about tab through youtube
Best like and best subscribe thanks so much
Canada
.but Murphy's Law law says... no chance for me.
Your bookmarks are pretty sus bud 0-o
Sent you an email today.
Sorry for the late reply
What the actual fu..
Have done every but know connection.
But am seeing a Note;add port number following IP address .
Am working on a Kyocera km2560