Belt Adjustment on a Ski-Doo XP - Tech Tip

Let us know what you think by commenting below. We'd love to hear from you! And please subscribe to our channel for more great mountain sledding video content: / sleddermag
Read more stories online at Mountain Sledder:
sleddermag.com/
Connect with us here:
Facebook: / sleddermag
Instagram: / sleddermag
Twitter: / sleddermag
Read our print magazine issues online:
issuu.com/mountainsledder

[@xxBacci]

Totally Rode on one of your sleds last year

[@pureadrenaline]

Good vid as always!

[@klswine]

nice guys cant wait for more vids

[@heffptbo]

good video..... i just got an xp touring, and had no idea to what some of the tools were for

[@z9944x]

Thanks!

[@fraserpogue]

What year is the summit in this video? The clutch bolt is loose and has fallen off my 2009 summit. What tool do you use to torque it and do you use loctite?

[@brydenmussell1496]

the whole outside piece that screws into the jackshaft has come loose one my 2009 skidoo, is there anything special i have to do to tighten it or is it just get it in hand tight?

[@offroadcustomwraps2342]

thanks for the tip i keep blowing belts on my 2014 800 summit etec every 300-400kms gonna solve that problem now

[@wadmanlikesbeer1]

Nice video but I have a 2010 800r renegade and she seems a little different, it has a plastic pice you have to move with a phillips. Do you have anything dealing with that? Thanks.

[@tjrubi7463]

How do you replace the belt ? How do you open the sheeves ?

[@TheKingwarmaster]

A I have a old ski do 550 and I haven't used it in a while and I started it up in the fall and it turned on , but a few mounts later I try to turn them on and I used the key and it wouldn't start , and I try end pulled starting it it didn't turn on , The battery is fully charged in the skido but it won't turn on If you have any tips please tell me because I've been stressed since the beginning of January

[@joeharbour2783]

Tried adjusting mine but, wont adjust enough to put the belt in proper position, so wondering if my belt is gone?

[@ronkaiser1065]

You spun it both ways? And it’s tighten?

[@glenmarechal7957]

Thank you even i could do this 😂😂😂

[@mitchellmorgan6673]

I have a 2009 summit . my brother has a 2011 rmk. his belt engages at around 3400 rpm and mine is at 4600 rpm is that just a variation in clutches or is mine way to loose? what is the average rpm that it should engage at?

[@mitchellkalina8191]

Mitchell Morgan that mainly depends on calibration, a loose belt will raise engagement slightly but no more than 1 or 200 rpm unless the belt is really shot. an 09 summit should engage around 3800, 4600 on a mountain sled is way too high. lower engagement is desirable on mountain sleds to help it take off without spinning and trenching. if it comes in that high the person who had the sled before u if there was one may have put a clutch kit in it

[@bowhunter-nv7rp]

I have a 2008 renegade the ribs are level with the clutch but it squeals. What should I do? Please help

[@pepeman3099]

loosen it up just a little.

[@nombr]

I have 06 summit 800, is this the same way I'd adjust my belt?

[@evgeniy7842]

this is the same way

[@freeridezach]

i type in 2007 but i keep fuckign gettting new sleds

[@mcnamash]

Can the belt be adjusted on a 1995 summit?

[@FlyfishingNinja]

i have a belt squeal what do i doo?

[@richname6256]

salut tyu me conais tu