Hi ViaBecs, I have a problem where my reverse camera is only working when I open the 360 app. When I go to reverse gear it doesn't automatically go to reverse screen like how it used to. Are you able to help?
the same. I have it installed just today. it works when the engine is not started, and stops to work, when I start the engine But i have not connected this 2 short red wires on both sides of camera's cable, and took power for camera from the rear light bulb. I will try to connect them and will see if it will fixed it.
@@juri2rx I just talked with the producator of my head unit, they said the camera has to be connected to the head unit, mine is connected to the backlight
@@145kamikaze I had noo time to check it to. But: 1st. I have found my Quick Manual, and it is written "do not connect these wires if your car comes with CAN-bus system". As I understand, one short red wire is connected in parallel to rear light, another to HeadUnit just to let the HU know the rear gear is switched on, just to give HU command to switch to the RearCamera View mode. Mine knows it even without rear camera at all. So it is not for powering, just for command. 2nd. As I wrote my camera operates correctly if the engine is NOT RUNNING. So, again not a wiring issue. During the day the rear camera even 5 times switched ON while driving backward, but just for a second each time. And if the engine just stopped running without turning the ignition OFF, the camera immediately is turned On. I suppose the problem could be in the "noise" on power line, while engine is running. There are many posts on it, "if your display is black - try to install the DC noise suppressor." My display is not black, but "No camera" or so was displaing I will try to find the filter or even try to power the camera with a spare battery . Probably filter is better, I have a gasoline car, and the sparkplugs and the coil can make electromagnetic noise.
#1 Does the backup camera activate when you put the car in reverse? if not, I think you don't connect the reverse/back line to backup camera. #2 The backup camera activates in reverse, but the image is black. How to fix it? Please set up the correct camera format on your head unit. then reboot the head unit and test the backup camera again. you also can connect the male CAM IN line to the female Video-IN-1 or CVBS-IN-1 line. Open the AUX app to check the camera image. If the camera image is displayed in the AUX app, the 10PIN CAM VIN line may be broken.
hi can you help, i have a android 11 radio but get no signal from rear camera no matter what setting i choose, but another after market radio i have picks it up straight away.
What if the reverse camera option isn’t available for me?
I have the same problem
Hey when i put the car in reverse the screen turns black with just the guide lines on it how do i fix it?
Hi ViaBecs, I have a problem where my reverse camera is only working when I open the 360 app. When I go to reverse gear it doesn't automatically go to reverse screen like how it used to. Are you able to help?
Hello, my camera is working perfectly if my car is not started, after i start it goes black, do you know what can be the issue?
the same. I have it installed just today. it works when the engine is not started, and stops to work, when I start the engine
But i have not connected this 2 short red wires on both sides of camera's cable, and took power for camera from the rear light bulb.
I will try to connect them and will see if it will fixed it.
@@juri2rx I just talked with the producator of my head unit, they said the camera has to be connected to the head unit, mine is connected to the backlight
@@145kamikaze it is strange, that it works with ignition ON, just engine is not running.
I will try to rewire it to the head unit.
@@juri2rx please tell me if it is working, i dont really have time this week
@@145kamikaze I had noo time to check it to. But:
1st. I have found my Quick Manual, and it is written "do not connect these wires if your car comes with CAN-bus system". As I understand, one short red wire is connected in parallel to rear light, another to HeadUnit just to let the HU know the rear gear is switched on, just to give HU command to switch to the RearCamera View mode.
Mine knows it even without rear camera at all. So it is not for powering, just for command.
2nd. As I wrote my camera operates correctly if the engine is NOT RUNNING.
So, again not a wiring issue.
During the day the rear camera even 5 times switched ON while driving backward, but just for a second each time. And if the engine just stopped running without turning the ignition OFF, the camera immediately is turned On.
I suppose the problem could be in the "noise" on power line, while engine is running.
There are many posts on it, "if your display is black - try to install the DC noise suppressor."
My display is not black, but "No camera" or so was displaing
I will try to find the filter or even try to power the camera with a spare battery .
Probably filter is better, I have a gasoline car, and the sparkplugs and the coil can make electromagnetic noise.
Thank you.. Able to settle my problem with your help.. thanks again
I've fitted mine correctly but I'm not even getting anything on the screen when it's in reverse any ideas please
#1 Does the backup camera activate when you put the car in reverse?
if not, I think you don't connect the reverse/back line to backup camera.
#2 The backup camera activates in reverse, but the image is black. How to fix it?
Please set up the correct camera format on your head unit.
then reboot the head unit and test the backup camera again.
you also can connect the male CAM IN line to the female Video-IN-1 or CVBS-IN-1 line. Open the AUX app to check the camera image.
If the camera image is displayed in the AUX app, the 10PIN CAM VIN line may be broken.
What about factory camera ??
I feel this to my soul. I can’t find a single thing about a factory camera not working
If you find anything please let me know 😢
I figured it out. Factory camera is a hassle but I managed to get it to work.
@@mehxs7225HOWWW
@@mehxs7225how did you get it to work with the factory camera. ?
Thank you 🙏 exactly what I needed to know 😮
hi can you help, i have a android 11 radio but get no signal from rear camera no matter what setting i choose, but another after market radio i have picks it up straight away.
000000
Dealing with the same, did you solve it?
Factory setting passwords is 8888?