ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- 10 Reasons to Build Foam Board RC Planes
In this video I will go over 10 reasons to consider using foam board to build RC model airplanes. These foam board RC planes are inexpensive, build quickly and most importantly fly great under electric power.
The video will go over 10 reasons to build from foam board, with examples of some of the models I have made from foam board available so that you can see them in flight. Details and links to these videos are below.
Foam board RC planes are also great for newbies as the material is very easy to work with. This beginner series is a how to introduction to the use of foam board to construct a wide range of RC airplanes. Note that foam board is easily available at Dollar Tree, Amazon and various crafts stores.
Here is a link to my TH-cam Channel:
/ timmckay56
And many thanks in advance for a post of this video on Facebook, it truly helps the channel a lot!
Regards,
Tim
Foam board Lazy Bee:
• Let's Build a Foam Laz...
F-22:
• F-22 Foam Board RC Air...
Square Flyer:
• Square Foam RC Plane -...
Bronco:
• Bronco 2 Foam Board RC...
How to make decals:
• RC Plane Decals for Ne...
Build a foam board wing in 10 minutes:
• Build a Foam Wing in 1...
How to enlarge plans:
• Easy Way to Enlarge Mo...
Aerodynamics of flat wings:
• How Do Flat Wings Crea...
Chapters
00:00 - Intro
03:00 - Beginners and Pros
03:30 - Cheaper than balsa
04:03 - Easy to paint
05:36 - Lightweight
06:49 - Build fast
07:55 - Easy to work
09:13 - Fail fast!
11:25 - Recreate old designs
13:05 - Try new ideas
14:30 - Build foam unique models
I agree with every thing you've said. I've been building R/C plane for almost sixty years. However for past ten years I've used foam core boards. I make wing's airfoils using KF air foils. I truly LOVE this type of airfoil. In my opinion this type air foil uses its own air to fly. Yes it takes some practice and doings to make it work, but in my opinion it's worth the effort. Each to their own I'll say. Two thumbs up for your effort and the video!!!
Al: I had to Google KF airfoils. They look most interesting! Tim
@Al Mosh Hi Al, the foam core board you mention - is it the PVC plastic coated "forrex" board ?
@@olgoz1 This foam is just that a foma. You can buy it at any dollar tree stores.
great video. I'm always looking at different building techniques.
Thanks for sharing.
Thanks for checking in! Tim
Thank you for another great video Tim.
Michael: Thanks again for checking in! Tim
Thanks for the great videos!
😊👍🏻 Tim
I started building with foamboard 16 years ago when it was hard to get depron I found the foam board at Kmart at the time. At the time I was also into the GWS foam plane kits which I greatly miss. $29 for a CNC-cut foam airplane kit that you had to build. They were so light they would fly on cheap coreless brushed motors. You can occasionally find the kits for $100 on eBay or Aloft Hobbies. They always came with motors and gearboxes. For $80 you can have an incredible flying warbird. Gosh, I miss those planes.
Great update, thanks! Tim
Realy great video thank u
Woody: You are very welcome! Tim
Thank you Tin for these informative video. I've never build a plane by my self. But, your video inspire me to do this.
Andres: Thanks for checking in and best of luck! Tim
Great video Tim! I'm currently working on a 42 inch foam board tri-motor w/retracts. Next will be a 800mm Pitts. Foam board combined with li-po batteries and brushless motors really opened up RC flight to so many more people which is priceless for the hobby! Cheers!
J: Great update, thanks! Tim
I always enjoy your videos Tim and have learned a lot from experienced guys like yourself to materialise my own ideas. Thank you !
Many thanks for checking in! Tim
@@TimMcKay56 I know you like the slow park fliers but have you tried any FPV (camera, video tx and goggles) and stabilising flight controllers ?
@@olgoz1 Not yet, maybe someday! Tim
👍I recently got a few boards to make a couple planes just to try out. Seems like it could be a lot more fun when you don't have to worry about breaking an expensive model
Jake: Good points, fully agree! Tim
Thanks 🙏
👍🏻 Tim
Thanks again
😊👍🏻 Tim
😊👍🏻 Tim
Tim - you sort of touched on this in several chapters, that you can repair foamboard planes pretty quickly. After my son crashed his tiny trainer and destroyed the nose, I cut off the front 1/4 off the fuselage and spliced in a new section, a 1 hour, easy repair, good as new. If you haven't built a foamboard 3d profile plane, they are fun to make and fly!
Mike: Excellent point, thanks for this reminder! Tim
Nice video!
I began building with balsa back in 1978 and I too have enjoyed building with foam. Just a few notes:
1 - If youngsters are cutting foam, then you can actually make clean, straight cuts using 32 tooth-per-inch hacksaw blades. With a little practice, and if you mark the foam and take your time, and insure the blade doesn't touch the table supporting the foam, then the cuts with a 32 tpi hacksaw blade can be accomplished. It's "very unlikely" anyone would get hurt cutting foamboard with a 32 tpi hacksaw blade.
2 - Technically, hot glue doesn't "dry" but it does cool and of course it hardens when it's cool. You might also want to show how parts can be glued together to form 90 degree angles & so forth using guides/blocks.
3 - Miscellaneous: foamboard can be used to make some incredibly cool bends and shapes. Very tight bends can be made without splitting or tearing the paper covering if you put packing tape on the outside of the bended area. Hinges are also great to demonstrate. I usually cover my servos with painters tape before gluing them into place. Maybe some or all of those techniques have already been provided in other videos you've created - I just discovered your page today so, not sure.
Keep at it - thanks & happy flying! :)
Brad: Excellent points and thanks for checking in! Tim
This is such a good video! :)
Skippy: Thanks! Tim
#11 reason. They bounce when they crash and are super easy to repair. Of course I’m simplifying a bit, but compared to Balsa, crashes are less severe for the same impact velocity and they tend to bend instead of breaking. Just straighten and fly again. Thanks for the video. I agree with your 10 reasons.
Very good, thanks for your input! Tim
Another great and interesting video Tim.. Unfortunate with the Phantom. But they said that the full size one was ‘ a triumph of power over airodynamics’😂
FF: No worries, had fun! Tim
Another informative, excellent video! I love the Bronco! There is something very relaxing about these quiet little models floating by. I doubt today's photovoltaic panels would provide enough current to power a small model airplane, but maybe someday? Anyway, thanks for giving me more ideas for a build! 👍
Stan: Many thanks! Tim
Check out rctestflight's videos. He uses foamboard and has made 3 or four versions of solar planes.
@@dustinwilson492 Really? Sweet, I am going to check them out. Thanks! 🤜🏻🤛🏻
Another great video Tim. Foamboard is cheap, fun, and you can rapid prototype. I have some really fun originals that were once built with foamboard and now have become even better when using the roughly 1/2" Lowes Blue 4x8 sheet of Styrofoam Insulation sheathing.(very inexpensive as well) Then glue blocks to hand shape the fuselage. Very satisfying results. I'm looking into silicone mold making and using expandable foams so I can easily produce more copies. Regards, LL
Hangar: Good point on the 1/2” foam, I do need to check that out! Tim
@@TimMcKay56 th-cam.com/video/fwco2dkVrhA/w-d-xo.html
Hi Tim, I'm fully on board. These light planes are the future with Remote ID, different experience but we fly toy airplanes anyway. Mind over matter. Excellent video
Doug: Fully agree! Tim
These are interesting. I am not keen on buying a few dozen more tools but Id love to show the guys at the field something custom..
They are a lot of fun! Tim
New flyer I got a nice big glider but I now build every plane built two this weekend 1700 skywalker absolutely fantastic trainer and then copied a balsa thunder tiger nitro in foam boards utterly brilliant and yes they all crashed but the cost of that crash a little bit of money and my time but the key is I’m learning much much faster about flying than I ever would just slamming a battery in and gyro , nice channel by the way here have a sub sir
Jay: Good report and thanks for checking in! Tim
Great video presentation Tim ! Do you have the general dimensions of the 3 oz with plane with the park brick control that you showed us in chpt 4 ? TY
Alan: 24" wingspan, length 18", wing chord 4" . Pretty much TLAR (That Looks About Right) for all dimensions. GC 20% back from wing leading edge. Good luck! Tim
Good info, Tim, Could you make a vid, showing the motor and electronics laid out on the bench for a 2 wire motor for a park flyer? I can't use my throttle joystick so I just have a toggle swicth for the motor.Thanks Joe.
Joe: Will add to the list! Tim
Tim, thanks for all the work you do making this sport/hobby accessible to new pilots. I have previously 'tried' to fly a couple of Aero Scouts but my flying area is a hay field with stubble. This produced a disaster when the front landing gear was ripped off and along with some of the other components attached to the balsa. Not all a loss as I enjoyed the repair process. I now want to enjoy the flying as well.
I would like to build a foam board SLOW flyer that will allow me to skid in for a landing - no wheels or gear.
This plane will be a trainer so nothing fancy.
Any suggestions as to plans?
I will purchase Spectrum DX6 with a AR620. I have had several of the ready to fly radios and they are not what I am interested in.
Looking forward to your reply.
Bill C
Bill: Copy all! My “Foam Bug” airplanes fly nice and slow, land on their belly. If you are into building, a Lazy Bee is hard to beat for relaxed flying. Tim
@@TimMcKay56 Thank you Tim. It looks like there is a electronic parts shortage on Stevens Aero and Horizon Hobby. Lots of back orders. Any other favorite suppliers?
Bill C
I did a video on where to buy RC electronics in 2022, do check that out. Tim
Nice video but I think you should build the balsa Dancing Wing Cute Girl.
Please do a build video of this plane.
Seemingly, a great slow flyer.
Greg: Will add to the list! Tim
I'm new to this hobby and I'm wondering if you could do a video of the size motors that are used on these types of planes. the most I know about them is the battery size. i.e. 1s 2s and so on.
David: It can be super confusing with all the differing electric motors. What I do is take a look at the tech specs for the motor, they usually list a model weight suitable for that motor. E-flite Park motors has a good chart on this. Two cells is about the minimum, for extra thrust a three cell can really change the model, just make sure the ESC can handle the higher battery cell count. Tim
Hey, Tim have you tried “Ross” brand foam boards from Walmart. I found it been lightest(when compared to Elmers) and cheapest. Let us know whatcha ya think.
RT: Great input, will check this out! Tim
I started to building rc foam board planes three years ago. And the main reason was, it is damn cheap. The biggest coast was my Spektrum Dx6e that i bought second hand from a friend. As long as your electronics on board (motor,esc,servos etc.) survive, your good to go to just build a new plane. And if some servo dies, they are not so expensive.
Fully agree! Tim
Well im sold..now off to get some foam board
👍🏻😊 Tim
I love how many innovations and creative solutions appeared once foamboard (and even just cardboard) started being used in RC plane modeling. As you said, it is cheap, easily available, and gets results fast. Product development benefits when experimentation can happen faster and with lower costs. Unfortunately, it seems that foam board is not a great material to build beginner-friendly RC planes that are lighter than 250 grams and can fly without remote ID after September this year. I hope the lower mass limit for this FAA regulation will be adjusted because simply buying light planes is not terribly innovative. But as you say a lot... Wait and see. :)
KH: Thoughtful observations, thanks so much for checking in! As you mention, remote ID will work out. I remember the huge fuss the 2.4 GHz radios created when they were first introduced in 2005 or so. Radios would not work, would jam each other, on and on. No different than the clamor and clatter on remote ID . . . and this is before anyone has actually seen or used one. Tim
Amazing thanks for sharing 👍
Thanks! Tim
just finished building an experimental 48 in wing span 3D Foam flyer, waiting on some wheels to be delivered.
Good luck with maiden! Tim
@@TimMcKay56 Thank you Tim
Main reason is for beginners they build a good flying trainer like the simple cub in foam board they will learn to fly and when crash you lose a few dollars in foam maybe and maybe a prop cheap to build another or build 5 or 6 and just transfer electronics over
👍🏻 Tim
Does EconoKote stick to foambard? I still fly Glo.
It does, and at a lower temperature setting. Tim
After you land your first successful flight you get a rush of excitement so strong you want to run to get your plane . Your hooked !
Randall: Many thanks! Tim
Outer zone model plans for planes
Absolutely, a fantastic source for plans. Tim
Tim,
I built a Foamboard aiplane but I am frustrated by the warping of the vertical and horizontal tail surfaces. I painted very light mist coats to avoid delaminating the paper from the Dollar Tree Foamboard. I painted the top and bottom surface alternately between coats to avoid this very situation.
I was successful at avoiding the delaminating of the paper but not the warping.
Is there a reliable method of correcting the warp once the plane is painted? The tail surfaces are built out of a single thickness “flat” Foamboard.
Any suggestions would be greatly appreciated. My plane looks like the Orca from Free Willy. 😕
Mike: Not sure the width of your foam. If narrow, consider gluing two layers together. I’ve had good luck with poster acrylic paint, minimal/zero warping, even with a light spray of Krylon clear sealer. I think once a warp is set in foam, no clever way to take it out. Tim
Tim,
Thank you so much for the quick reply.
I can see the advantage of Foamboard airplanes, but there is a learning curve for sure. Luckily the advantage of cheap building material helps take the sting out of hard lessons.
If by some stroke of genius I can figure out a way to solve my warping issue I will pass it along. I think I might take some “before” pictures just in case.
Thanks again Tim…love the channel!
No worries! Tim
@@Yankee2003 Hi Mike, I also found that painting warps the board. I think very light coats and perhaps different types of boards are where others are successful. Perhaps even more favourable environmental factors. I don't paint because of this warping . . I use couloured packing tape which has it's own limitations and frustrations but hugely increases strength.
I would love to hear and see some of those frustrations and limitations. I have heard a number of people mention the colored packing tape but I don’t really understand to whole idea. Is there a combination of paint and colored packing tape?
Awesome content and video production. Instead of giving Mr. Bezos free plugs may I suggest that you recommend your viewers to have a look at what their locally owned craft/hobby store has in stock? If we keep on shopping at Amazon (I don't) one day that shopping center near our home will either be a data center or distribution center.
Agree completely with supporting your LHS. Just need one nearby. 😊 Tim
are you able to give me the link on amazon?
Search for Langford and Nickel foam board on Amazon. Tim
now I really want to make one of the flat planes and paint it like a pizza box.
Anthony: Go for it!! Tim
Where can I buy foam boards? Preferably 5mm?
CD: You can get foam board at craft stores (Michaels), and I get all of mine from www.Amazon.com Tim
@@TimMcKay56 Where can I find large foam boards? I'm trying to build a jumbo 747 rc, but the foam boards that I can find are too small.
@@customdev1498 I just know of the 20" by 30" by 3/16" foam board that I buy on Amazon. Tim
Where can I get plans for foam board planes
If I have the plans they’ll be a download in the Description. Tim
@@TimMcKay56 🙏
Why do you scrape every one of them by landing on pavement?
Not a big deal, models do fine. Tim
Maybe I could try foam board and save my Cessna 150 in the box, forever.
👍🏻😊 Tim
Don’t you guys get board flying 5mph in a circle? Seems like it would get boring really quickly considering it takes hours to build and paint
It should be “bored”, not board. Tim
Please can i use a cardboard instead of a foam board in building my plane
Of course! Tim
I still prefer balsa and nitro fuel.
(I've done foam. It's easy, light, and CHEAP. I LIKE building. I like sturdy. And the SMELL!)
So get off my ICE's. More noise, more FUN. LESS FIRE!
👍🏻😁 Tim
Agreed! 👌👍 I love the smell of nitro in the morning 😋😂
I envy you coz building rc planes here is illegal 😢
Sorry to hear this!
You made a serious misrepresentation of balance with regard to your F-4 build. Motor placement is 100% irrelevant. Any winged flying plane , full size or model, must be balanced according to a % of MAC, (mean aerodynamic cord), typically 25-30% of wing cord Placement of R/C equipped, batteries or ballast weight shifted to accomplish this are required. Your F-22 lands poorly due to improper balance.
👍🏻 Tim