Esse watercooler,os coolers dele são em modo espelho,assim como os outros coolers ?(tem como retirar esse adesivo da lian li do watercooler e ficar espelho) Are the watercooler coolers mirrors?, or not adhesive
hey man 5800x doesnt look it's running on stock . is this on eco mode also am getting 145 power draw whereas you're getting way less power draw howww...
What processor is this going on? Just judging from the motherboard it doesn't seem like a high end 5000 series ryzen, in which case this aio is probably overkill not giving any performance boost. I have the galahad with regular lian li fans, but its on a 5900x, which helps for OC potential... it its a 5700x or below its really not needed... but 5900x are down to $380 so you could upgrade if you're fine with it being out dated in the next few months when am5 releases
It's a 5800x, 240mm should be enough, but 240mm is too ugly on this case, it's about 63 Celsius on gaming with 4950mhz auto oc, and it's an pre build alienware motherboard, they use Intel socket on all models...........
So there's no difference between this radiator and the one that came with the old non uni fans? I bought the older one because it was cheaper and I planned on upgrading it to the infinity uni fans. I see that one has the same connectors coming off the block, so I'm assuming it's just the different fans.
Hello, I've noticed that You used 4 screws when mounting the block to the CPU. According to the manual it's a two screws mounting kit for AMD's AM4 socket . Also the guy below is right - when mounting AIO ,the pump should be always below the radiator and if possible the tubes to radiator fittings also at the bottom(it can make bubbling sound otherwise). GAMER NEXUS channel has a video about the topic.
That board is from alienware, it's use Intel socket on all model, and about the position of the radiator because pipe too short to put the tubes at the bottom on this case
All it need its 3 pin rgb port and usb port, I am very sure it needs the usb port plug in , and I don't know is the ARGB just for the software "sync to to motherboard " function, I will test it out and reply here
Just test it, the ARGB port just for "sync to motherboard" , this aio only need usb port to light it up,doesn't need the controller to get the light on
i have same lian li galahad aio 360 rgb uni fan sl 120 edition but after a month my 2 fans rgb is not working at all, fan is working fine, fan is spins very well, but rgb is not glowing any solutions?
Haven't happen to me, but maybe connection problems, try switch those two fan on different positions, or did you disable the light on the lianli software?(like didn't select those two fan lights on?)
@@mynewtoys5468 i switched the fans but same thing happens only first fan works properly can control by software but other two can't i also change the power cable but same result.
there is no issue from software i can change the rgb through software but only 1st change their color and the cpu but there is no effect of other two fans
@@AbhishekPrasad752 so If put 2 and 3 on the first and they still light up, probably is controller or software problem (window or lianli software) , if it's controller then need a new one or contact lianli
Never mount the Tank in/outtake upwards when mountet vertically, air goes up and travel to the pump will eventually make noise and shorten the lifespan of the pump and effect the cooling.
As long as the pump isn't the highest point its fine, you can have the tube on the radiator facing up, as long as they are higher up than the pump itself... if the pump is the highest part you will get unnecessary noise and shortened life span
Educate yourself before spewing incorrect information over the internet, th-cam.com/video/DKwA7ygTJn0/w-d-xo.html&ab_channel=JayzTwoCents the way this AIO is set up is perfectly safe and acceptable
Esse watercooler,os coolers dele são em modo espelho,assim como os outros coolers ?(tem como retirar esse adesivo da lian li do watercooler e ficar espelho)
Are the watercooler coolers mirrors?, or not adhesive
Why is water cooler in the AIO’s name when there is no water anywhere? Please reply
hey man 5800x doesnt look it's running on stock . is this on eco mode also am getting 145 power draw whereas you're getting way less power draw howww...
Oh, it's on alienware motherboard, they use Intel stock on all model, and the overclocking so.... sorry, no overclocking, even it shows overclocking.
On a asus board,after overclocking on gaming its about 60c
Whats your temps on r23 cinebench with lian li galahad 360
@@ManOfF1re 5800x multi core 4600mhz(max 4999) 71.5c on r23
@@ManOfF1re 130w
What processor is this going on? Just judging from the motherboard it doesn't seem like a high end 5000 series ryzen, in which case this aio is probably overkill not giving any performance boost. I have the galahad with regular lian li fans, but its on a 5900x, which helps for OC potential... it its a 5700x or below its really not needed... but 5900x are down to $380 so you could upgrade if you're fine with it being out dated in the next few months when am5 releases
It's a 5800x, 240mm should be enough, but 240mm is too ugly on this case, it's about 63 Celsius on gaming with 4950mhz auto oc, and it's an pre build alienware motherboard, they use Intel socket on all models...........
I just doing case switch on other video that I want to change the aio
So there's no difference between this radiator and the one that came with the old non uni fans? I bought the older one because it was cheaper and I planned on upgrading it to the infinity uni fans. I see that one has the same connectors coming off the block, so I'm assuming it's just the different fans.
Yeah,just different fans
Hello, I've noticed that You used 4 screws when mounting the block to the CPU. According to the manual it's a two screws mounting kit for AMD's AM4 socket . Also the guy below is right - when mounting AIO ,the pump should be always below the radiator and if possible the tubes to radiator fittings also at the bottom(it can make bubbling sound otherwise). GAMER NEXUS channel has a video about the topic.
That board is from alienware, it's use Intel socket on all model, and about the position of the radiator because pipe too short to put the tubes at the bottom on this case
@@mynewtoys5468 I understand, I ordered yesterday the same AIO. Can You tell me if it has thermal paste pre-applied or I have to buy one?
@@kirilmihailovski9495 it comes with one
@@mynewtoys5468 Cool, thank You and have a great time using Your PC. :)
Just to be sure, can you confirm that the ARGB cord from the block fits in the controller, without the need of additional kit? Thanks.
All it need its 3 pin rgb port and usb port, I am very sure it needs the usb port plug in , and I don't know is the ARGB just for the software "sync to to motherboard " function, I will test it out and reply here
Just test it, the ARGB port just for "sync to motherboard" , this aio only need usb port to light it up,doesn't need the controller to get the light on
You can make the regular version unifans with the right screws..
8:05 Jesus...
🤣
Do you encounter noice in pump header?
Only first few day has little little water bubble sound, and no noise and sound after
i have same lian li galahad aio 360 rgb uni fan sl 120 edition but after a month my 2 fans rgb is not working at all, fan is working fine, fan is spins very well, but rgb is not glowing
any solutions?
Haven't happen to me, but maybe connection problems, try switch those two fan on different positions, or did you disable the light on the lianli software?(like didn't select those two fan lights on?)
@@mynewtoys5468 i switched the fans but same thing happens only first fan works properly can control by software but other two can't i also change the power cable but same result.
there is no issue from software i can change the rgb through software but only 1st change their color and the cpu but there is no effect of other two fans
@@AbhishekPrasad752 so If put 2 and 3 on the first and they still light up, probably is controller or software problem (window or lianli software) , if it's controller then need a new one or contact lianli
Is thermal paste included?
Yes
does this come with a 1700 bracket
Didn't find 1700 on the Manu, so
ok
Never mount the Tank in/outtake upwards when mountet vertically, air goes up and travel to the pump will eventually make noise and shorten the lifespan of the pump and effect the cooling.
The pipe too short on this case
As long as the pump isn't the highest point its fine, you can have the tube on the radiator facing up, as long as they are higher up than the pump itself... if the pump is the highest part you will get unnecessary noise and shortened life span
@@mattb6646 thanks , I noticed it has very little and just 1-2 second water water sound sometimes, I will try to move the radiator as high as possible
Educate yourself before spewing incorrect information over the internet, th-cam.com/video/DKwA7ygTJn0/w-d-xo.html&ab_channel=JayzTwoCents the way this AIO is set up is perfectly safe and acceptable