i was just going to send you the Link to this video, cuz you mentioned if you disassemble the sculpy clay machine it will come apart, cuz of some pins it has, but this young lady here just with a bit of elbow grease took the panel off.
MIND BLOWN! Just watched the video, and DID IT in less than 5 minutes! I've avoided taking the guards off because I thought I'd have to take the whole thing apart to do it. Nope! Easy Peasy!! Thanks for sharing!
You have no idea how much this has helped me. I couldn’t seem to get it clean enough for my white to stay white. Now I can. Thank you so much and keep up with all your fabulous designs and tutorials.
Well, that took less than 5 minutes and it is so satisfying to now have a thoroughly clean pasta machine! Thank you, Samantha. I'd have never had the notion that those fenders could be removed.
I watched this video in bed last night and couldn’t wait til this morning to do it. I did it. It’s is great! No more obstructing my view. I can see what’s happening with the clay now. Thanks so much.
I removed the bottom fenders, a long time ago. I got so tired of old colors getting on my new clay. So I popped them off! Never thought of taking the top fenders off. Thank you, for all of your advice and helpful suggestions and tips. I love to watch all of your tutorials!
I had my husband do this about an hour ago. I have an Atlas 180. It is a game changer. I had so much clay stuck that I could have made a small skinner blend. And i cleaned my machine after every use and sometimes during use. Being able to get on the ledge, is so much better and you know its clean. Instead of just guessing. Thanks so much.
HELPFUL! Thank you so very much, Samantha! Tips like this are needed for those of us who do clay and haven’t figured it all out yet! Ha! You are a wonderful teacher/instructor and you’ve helped so many clayers! Again, thank you for your willingness to share and help others. You are a gem!! Blessings to you!
Update...i was using my pasta machine after I removed guards and poof the rollers fell off and I was not able to put it back together. I just bought a new one. After I flipped out cuz I was near a projects end. N had to wait about a week for new one... I am arthritic so can't use regular hand rollers. Anyways don't know if it was the cause but just be aware... Omg... THIS IS THE BEST VIDEO I HAVE EVER SEEN...for 3 years I have tried to figure a way to remove the guards... Never knew it would take all of 5 minutes if that.. Wow what a mess inside... I have cut myself on the guards I have thumb scars wow. Thank you so so much for this!!! Now my machine is usable... I was getting pits n peeling in all my good clay thanks again!!!
Thank You Samantha!! I don't use mine all the time, but I was getting the Gunk on my pieces of clay but with this video, my husband took off my fenders and I gave it a through cleaning...and it is in new working order...thanks so much for the tip...
I always get so EXCITED EVERY TIME YOU SHOW UP ON MY FEED! I THINK I SHALL NAME YOU THE "PRINCESS OF POLYMER" SINCE DONNA KATO IS ALREADY THE "QUEEN OF CLAY"! & probably will always will be, even after she's gone!!!" But her projects are long and difficult, and yours are so much more doable for the average person w/o a P.H.D. in Clay Jewelry! Not that I wouldn't love to make her pieces, but i'm just not that skilled or patient to be able to make them without being on the news tonite, without the news caster saying things about me like: "The neighbors all said what a lovely person she was, so friendly to everyone, and she was so kind to children? We just can't understand what happed to her, and why not only her, but everything in the house even the ceiling and HERSELF, were covered with clay???!" Poor thing, I hope she recovers from whatever drove her mad like that."
This was SOOOOO helpful. It took a bit of work to get the fender off but worth the effort. I cleaned out enough clay to make a bead core, ha ha, Thanks, Samantha
Wowwwwww! Thank you so much! I never would have thought to take those off! I've been running a dirty piece of white clay through before I used a light color clay. This took me about 20 minutes start to finish. So easy!
Thank you! I followed your advice and it worked perfectly. And I found enough clay wedged under it to make three cabochons. No wonder I couldn’t keep it clean enough.
I've discovered a couple of things I thought I'd share. The first comes from polymer clay artist, Yonat Dascalu. She puts a block of Fimo on the pasta machine to stop the clay expanding. One side of clay against the side of the pasta machine and the other butted-up against a block of Fimo. It works! The second comes from my own experiments. To clean my pasta machine, I put a babywipe through on the thickest setting a couple of times. Then I fold a good quality piece of kitchen paper and put that through a couple of times. It also works!
most Marcado and Atlas machines have a screw on the side without the thickness dial.You can remove that and then use a wrench to remove the bold inside that allows you to open up the one side so that you can easily remove the fenders and even the blades to clean. No need for a husband.😆 I have a video on my youtube channel showing how. This won't work on all machines, but most of them do come apart this way.
@@Yosofool I was just suggesting that you can easily remove the fenders by removing the one side, instead of having to go at them with pliers and possibly cutting yourself or marring your rollers.
Be aware when trying this with an Atlas. They are made with a stronger stainless steel and it doesnt bend easily. I still had to take the bottom and side off, not hard but just a bit more work. Still I've been meaning to take the fenders off and this gave me the push to do it. Now my machine is nice and clean. Thanks Samantha ❤
Oh my, I never even thought about that the clay could (does) get stuck in the machine like that!!! my mind is blown! Thank you SO MUCH for this useful info! now I know what I need to do first thing in the morning....yep, get those fenders off! :D 💜 I just got a new one, so there wont be much in there (only used it 2 times) but it´s better to get that done right away so you can keep an eye on it :)
Thank you so much lol.... I just got a machine and would have had absolutely no clue about any of that ❤❤you are my hero ❤❤. lol thanks again for sharing
With an old Atlas 150...built like a tank...I found (when working the 2nd side) that pulling the fender from the bottom first gave me more leverage. Also in the front of the roller area there are sharp screws under the fender holding the enclosure on, so I glued small round beads on the points so neither the clay nor my hands get jabbed!
Thank you! I hate those metal guards. I always thought that they must have some reason for being put on. So I fought trying to clean around them all the time. I am so glad you showed us this.
Thank you (I’m a boy on my grandmas account so it makes sense) I need a gift for my girlfriend and all she wants is one of these. I’m kinda broke right now so I want to make a pasta roller more efficient and maybe add a vinyl skin or something to make it more special. This community is dope.
Hey Jess thankyou for all the tips you have inspired three generations. however for cleaning your Pasta machine all you need is one foot and a power wash if its a hand fed stainless steel one. thanks again, stay safe stay home and candy cane xxx
Great video, Samantha, thank you 🌟! I had the cracked plastic blades issue with my first (secondhand) machine and just last week bought a new one. I will be removing the guards today 😊
For people with an Atlas 180 - I was able to remove the fenders off using this plier method! It was tough, since the metal is quite strong, but with patience and strength (I did have “guy” help) they’re now off and I am a happy camper!!!
I think taking off the end with the handle (or both ends) might be a better way to go. This allows you full access to the hidden sides of the scrapers, so you can do a thorough clean of them every few months. Also you can then remove the fenders without bending them with pliers, so you can still get better access to do a frequent clean of the blades with a wooden barbecue skewer or similar. You do need access to a few simple tools to take the side(s) off and the job is quite fiddly.
Great idea! I was struggling to clean my newly purchased for-clay pasta machine and even considering a motorized one (easier on my 69 year old joints). Still might get the motorized one though and use manual for traveling.
I am in the same boat. Motors were around about a year or to ago but thought no, I can keep doing it. After another round of injections into my shoulder joints on Tuesday and an extremely bad tennis elbow on my dominate arm, I think I too will be looking more diligently for a motor. Good luck in your hunt.
Ok. I will try it this way. I have one sitting still unassembled because I took it apart. I’ve wanted to take my fenders off the atlas’s for a long long time but was scared to after I couldn’t get one back together!!As alway, thanks Samantha!
I tend to use cheap eBay pasta machines like this one. www.ebay.com/itm/Stainless-Steel-Spaghetti-Lasagne-Fettuccine-Sheets-Pasta-Maker-Cutter-Machine/312434944161?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D225074%26meid%3D524c81dfcd6641608b00953c4746fbd0%26pid%3D100005%26rk%3D4%26rkt%3D8%26mehot%3Dpf%26sd%3D313060062092%26itm%3D312434944161%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bDemotionZeroArw%26brand%3DUnbranded&_trksid=p2047675.c100005.m1851
@@lizrichardson3309 If you are in the US, this is the equivalent: www.ebay.com/itm/Stainless-Steel-Pasta-Maker-Machine-Tagliolini-Fettuccine-Lasagne-Cutter-Roller/392847640345?hash=item5b778b4719:g:ilEAAOSwPhle8HCN
You'll need to check the pasta machine. My metal flaps were slotted into a gap on each side of the machine. Some machines have their flaps fussed to the rest of the machine.
Very interesting. I don't use clay, but I often use colored dough. Is there any drawback to removing the fenders other than the look? I'm tempted to do this myself now.
@@JessamaTutorials ...you don't have to smash the fenders like you did to remove them. If you just undo the screws they come right off without destroying them. Much easier too.
Hi Jessama, thank you for the tutorial, very helpful. I left my pasta machine to my parent's country. That one was not very sturdy, and handle used to come out. Can you please suggest where I can get a good machine for polymer clay projects. May I know from where you bought yours?
Hi there, i have cleaned my machine in all places i can see, but i am still getting streals of black clay on my white clay especially on thin settings. What do i do?
Thanks Samantha, very helpful. I didn’t even know there were blades near the rollers. Can you provide a link to the pasta machine with metal blades? Thank you
Awww too bad. Do you currently recommend a particular pasta machine. How would I know if a model has plastic blades? I was looking on Amazon but didn’t see any designation although I only looked superficially as I was looking for the brand you mentioned. Right now I am using an actual pasta machine but it’s bigger and bulkier. I want to get an actual polymer clay “pasta” machine.
I'm afraid it's luck of the draw. I didn't know the machine had metal blades before I bought it. Most machines have the plastic blades I'm afraid. Older machines are more likely to have metal blades.
@@safehavensanctuary-hollyg.8814 I got this pasta machine from Amazon and it's all stainless steel! I really like it, does the job :) www.amazon.co.uk/dp/B072JH952T?ref=ppx_pop_mob_ap_share
No. This won't work with all machines. You need to check that the fenders are attached the same way as mine before trying to remove them. It's fairly easy to see if they are attached by four small flaps or if the whole thing is attached.
I was able to remove the fenders off my Atlas 180 using this plier method - it was tough, since the metal is quite strong, but with patience and strength (I did have “guy” help) they’re now off!!!
Do you put the fenders back on or leave them off? I have an older machine with metal blades on the bottom. I’ve not been able to clean it properly and always makes such a horrible noise when I turn the crank. Bought a new pasta machine and haven’t used it yet. But I can see now it has plastic bottom blade. Wouldn’t of known that without this video. Thank you!
Thank you for this tutorial. I am new at this and am trying to figure out why my clay keeps sticking to the other roller. I can't figure out what I'm doing wrong. Just when I'm all ready to start my adventure. Any ideas? I love your work though. But I keep running into roadblocks.
Большое спасибо за совет. Я ни как не могла хорошо почистить свою машинку. Теперь я знаю, что надо делать... Правда, было бы замечательно, если бы можно было снять и нижние пластины... И все же, огромное спасибо за видео...
I was able to remove the fenders off my Atlas 180 using this plier method - it was tough, since the metal is quite strong, but with patience and strength (I did have “guy” help) they’re now off!!!
Are the blades necessary too (sorry perhaps stupid question). wondering if the rollers are enough? This would be even easier to clean as my clay still gets caught in there
Very clever! Makes me wonder why I didn't think to just yank the fenders off with pliers! Good job Samantha!
Thank you. :D
Cindy, seeing you comment here was exciting! You and Samantha are my Polymer Guides 💜💜💜
i was just going to send you the Link to this video, cuz you mentioned if you disassemble the sculpy clay machine it will come apart, cuz of some pins it has, but this young lady here just with a bit of elbow grease took the panel off.
MIND BLOWN! Just watched the video, and DID IT in less than 5 minutes! I've avoided taking the guards off because I thought I'd have to take the whole thing apart to do it. Nope! Easy Peasy!! Thanks for sharing!
You are a genius! Paused the video and ran off to 'doctor' my machine immediately. What a difference! Thank you!!!!
Omg how utterly simple! And for years we've been disassembling the machines to get them off!! Clever!!
Your tutorials are the best. I removed the fenders. Makins pasta machine. Easy peasy. So easy. Thank you.
You have no idea how much this has helped me. I couldn’t seem to get it clean enough for my white to stay white. Now I can. Thank you so much and keep up with all your fabulous designs and tutorials.
Well, that took less than 5 minutes and it is so satisfying to now have a thoroughly clean pasta machine! Thank you, Samantha. I'd have never had the notion that those fenders could be removed.
I watched this video in bed last night and couldn’t wait til this morning to do it. I did it. It’s is great! No more obstructing my view. I can see what’s happening with the clay now. Thanks so much.
I removed the bottom fenders, a long time ago. I got so tired of old colors getting on my new clay. So I popped them off! Never thought of taking the top fenders off. Thank you, for all of your advice and helpful suggestions and tips. I love to watch all of your tutorials!
I never understood why people don't just remove the bottom ones too. Has it worked well for you? Does your clay get nice and flat?
Hi, I was thinking the same. I couldn't figure out what they were for, I'm afraid of
I had my husband do this about an hour ago. I have an Atlas 180. It is a game changer. I had so much clay stuck that I could have made a small skinner blend. And i cleaned my machine after every use and sometimes during use. Being able to get on the ledge, is so much better and you know its clean. Instead of just guessing. Thanks so much.
HELPFUL! Thank you so very much, Samantha! Tips like this are needed for those of us who do clay and haven’t figured it all out yet! Ha! You are a wonderful teacher/instructor and you’ve helped so many clayers! Again, thank you for your willingness to share and help others. You are a gem!! Blessings to you!
Update...i was using my pasta machine after I removed guards and poof the rollers fell off and I was not able to put it back together.
I just bought a new one. After I flipped out cuz I was near a projects end. N had to wait about a week for new one... I am arthritic so can't use regular hand rollers. Anyways don't know if it was the cause but just be aware...
Omg...
THIS IS THE BEST VIDEO I HAVE EVER SEEN...for 3 years I have tried to figure a way to remove the guards... Never knew it would take all of 5 minutes if that.. Wow what a mess inside... I have cut myself on the guards I have thumb scars wow. Thank you so so much for this!!! Now my machine is usable... I was getting pits n peeling in all my good clay thanks again!!!
Thank You Samantha!! I don't use mine all the time, but I was getting the Gunk on my pieces of clay but with this video, my husband took off my fenders and I gave it a through cleaning...and it is in new working order...thanks so much for the tip...
I always get so EXCITED EVERY TIME YOU SHOW UP ON MY FEED!
I THINK I SHALL NAME YOU THE "PRINCESS OF
POLYMER" SINCE DONNA
KATO IS ALREADY THE
"QUEEN OF CLAY"! & probably will always will be, even after she's gone!!!"
But her projects are long and difficult, and yours are so much more doable for the average person
w/o a P.H.D. in Clay Jewelry!
Not that I wouldn't love to make her pieces, but i'm just not that skilled or patient to be able to make them without being on the news tonite, without the news caster saying things about me like: "The neighbors all said what a lovely person she was, so friendly to everyone, and she was so kind to children? We just can't understand what happed to her, and why not only her, but everything in the house even the ceiling and HERSELF, were covered with clay???!" Poor thing,
I hope she recovers from whatever drove her mad like that."
Thank you Samantha, you have helped to relieve the stress from using this machine for me - I never even considered this.
This was SOOOOO helpful. It took a bit of work to get the fender off but worth the effort. I cleaned out enough clay to make a bead core, ha ha, Thanks, Samantha
Wowwwwww! Thank you so much! I never would have thought to take those off! I've been running a dirty piece of white clay through before I used a light color clay. This took me about 20 minutes start to finish. So easy!
Thank you! I followed your advice and it worked perfectly. And I found enough clay wedged under it to make three cabochons. No wonder I couldn’t keep it clean enough.
I've discovered a couple of things I thought I'd share. The first comes from polymer clay artist, Yonat Dascalu. She puts a block of Fimo on the pasta machine to stop the clay expanding. One side of clay against the side of the pasta machine and the other butted-up against a block of Fimo. It works! The second comes from my own experiments. To clean my pasta machine, I put a babywipe through on the thickest setting a couple of times. Then I fold a good quality piece of kitchen paper and put that through a couple of times. It also works!
Thank you so much for your videos. I am from South Africa. Starting on clay after many years and I learn so much from you.
I’m all about care for our tools. Another informative video. Many thanks Jess
I removed the fenders off mine today using a screwdriver it was very easy. Thanks for the tip of removing the fenders...
most Marcado and Atlas machines have a screw on the side without the thickness dial.You can remove that and then use a wrench to remove the bold inside that allows you to open up the one side so that you can easily remove the fenders and even the blades to clean. No need for a husband.😆 I have a video on my youtube channel showing how. This won't work on all machines, but most of them do come apart this way.
Yes I watched your video clip, but I manage to put everything back and the fenders do nothing except the look.
@@Yosofool I was just suggesting that you can easily remove the fenders by removing the one side, instead of having to go at them with pliers and possibly cutting yourself or marring your rollers.
Be aware when trying this with an Atlas. They are made with a stronger stainless steel and it doesnt bend easily. I still had to take the bottom and side off, not hard but just a bit more work. Still I've been meaning to take the fenders off and this gave me the push to do it. Now my machine is nice and clean. Thanks Samantha ❤
I did it to another machine I had and messed it up! I’m going to do it to these atlas’s though.
Thank you so much for making this video. EXTREMELY HELPFUL!
Oh my, I never even thought about that the clay could (does) get stuck in the machine like that!!! my mind is blown!
Thank you SO MUCH for this useful info! now I know what I need to do first thing in the morning....yep, get those fenders off! :D 💜 I just got a new one, so there wont be much in there (only used it 2 times) but it´s better to get that done right away so you can keep an eye on it :)
Thank you so much lol.... I just got a machine and would have had absolutely no clue about any of that ❤❤you are my hero ❤❤. lol thanks again for sharing
As always an informative, to the point video. I now have the courage to modify my machine!! Thank you so much!!!
With an old Atlas 150...built like a tank...I found (when working the 2nd side) that pulling the fender from the bottom first gave me more leverage. Also in the front of the roller area there are sharp screws under the fender holding the enclosure on, so I glued small round beads on the points so neither the clay nor my hands get jabbed!
Thank you! I hate those metal guards. I always thought that they must have some reason for being put on. So I fought trying to clean around them all the time. I am so glad you showed us this.
Thank you for that information. very helpful. Never knew that, and will definitely be making that modification so that I can clean my machine better.
So happy to have found this genius video, thank you Samantha so much xxx
Thx … ❤ … it was so helpful and easy peasy to remove the guards … now i enjoy my machine again … and thx for a lovely Channel
Thank you so much for this extremely useful tip Samantha. I would never have known one can do that!
It was difficult but I managed to do it with a lot of grunting and gnashing of teeth lol. You made it look so easy!! Great tutorial :)
Thank you! I've always wanted to do this but didn't know how. Great video
Thank you so much Samantha, this is going to make cleaning my machines so much easier.
Thank you so much. I have removed the guards and am so pleased with being able to better clean my machine.
Omg thank you so much for this video! You saved my life! I never had the courage to pull the shield apart but now I do!!! Xxx
Thank you (I’m a boy on my grandmas account so it makes sense) I need a gift for my girlfriend and all she wants is one of these. I’m kinda broke right now so I want to make a pasta roller more efficient and maybe add a vinyl skin or something to make it more special. This community is dope.
Excellent advice Samantha, this will help me a lot, Thank you!
Thank you Samantha this was a great informative tutorial. I have an old machine I will practice on first x
Thank you......I had a bunch of clay backed up in it... lol I so glad you did this video.......... TFS wooohoooo
Hey Jess thankyou for all the tips you have inspired three generations. however for cleaning your Pasta machine all you need is one foot and a power wash if its a hand fed stainless steel one. thanks again, stay safe stay home and candy cane xxx
isopropyl alcohol wipes or rag are good as well but a large glass of wine for yourself is better ;)
Oh you clever sausage..... off to shout hubby for assistance 😘
OMG! I'M SO AMAZED! Thank you so much for sharing this tutorial!
Great video, Samantha, thank you 🌟! I had the cracked plastic blades issue with my first (secondhand) machine and just last week bought a new one. I will be removing the guards today 😊
Thanks for this! On the Makin roller that I have I was able to rip the fenders off by hand. Much better now!
Jess, I love your videos. But it is so much easier to take the machine apart then trying to bend metal.
This has literally saved my white clay. I was scared to do it. But I did. Thank you so much
For people with an Atlas 180 - I was able to remove the fenders off using this plier method! It was tough, since the metal is quite strong, but with patience and strength (I did have “guy” help) they’re now off and I am a happy camper!!!
Uggghhhh I have two old atlas’s that I’ve been wanting to do this with for a good while and haven’t because I’m scared!!
I think taking off the end with the handle (or both ends) might be a better way to go. This allows you full access to the hidden sides of the scrapers, so you can do a thorough clean of them every few months. Also you can then remove the fenders without bending them with pliers, so you can still get better access to do a frequent clean of the blades with a wooden barbecue skewer or similar.
You do need access to a few simple tools to take the side(s) off and the job is quite fiddly.
Thank you for the tutorial.
I took mine off ages ago and was so happy.
This is awesome. I'm going to do this right away
Well, this will come in handy before I start making WHITE Christmas snowflakes! Thanks!
Can I do this with a atlas 150
Yes.
Thank you Samantha I will give this ago 👍🏻
Great idea! I was struggling to clean my newly purchased for-clay pasta machine and even considering a motorized one (easier on my 69 year old joints). Still might get the motorized one though and use manual for traveling.
I am in the same boat. Motors were around about a year or to ago but thought no, I can keep doing it. After another round of injections into my shoulder joints on Tuesday and an extremely bad tennis elbow on my dominate arm, I think I too will be looking more diligently for a motor. Good luck in your hunt.
Gracias, ya se lo quite me quedó muy bien. Eres un genio. 👍🏼
Perfect job great tutorial for this
Hi Samantha, the black pasta machine what is the brand, it looks like it’s wider, thank you jeni
It's a pasta machine I got at Aldi. It's a Jamie Oliver make.
Thank you for sharing. Not too difficult to remove
Ok. I will try it this way. I have one sitting still unassembled because I took it apart. I’ve wanted to take my fenders off the atlas’s for a long long time but was scared to after I couldn’t get one back together!!As alway, thanks Samantha!
Thanks so much for this...I was wondering about this...
I seriously need to do mine … the amount of times I’ve sliced the top of my finger open trying to clean it.
Thanks Samantha! X
I did it! ❤️ I managed to get them off - best thing I’ve ever done. So much easier now.
Very interesting video Samantha! What is the make of the pasta roller you were altering please?
I tend to use cheap eBay pasta machines like this one. www.ebay.com/itm/Stainless-Steel-Spaghetti-Lasagne-Fettuccine-Sheets-Pasta-Maker-Cutter-Machine/312434944161?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D225074%26meid%3D524c81dfcd6641608b00953c4746fbd0%26pid%3D100005%26rk%3D4%26rkt%3D8%26mehot%3Dpf%26sd%3D313060062092%26itm%3D312434944161%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bDemotionZeroArw%26brand%3DUnbranded&_trksid=p2047675.c100005.m1851
@@JessamaTutorials thank you!
@@lizrichardson3309 If you are in the US, this is the equivalent: www.ebay.com/itm/Stainless-Steel-Pasta-Maker-Machine-Tagliolini-Fettuccine-Lasagne-Cutter-Roller/392847640345?hash=item5b778b4719:g:ilEAAOSwPhle8HCN
Ok maybe silly question. Can we also take off the blades, so just the rollers are left?
Not a silly question at all.
You can't take the blades off. They keep the clay from sticking to the rollers.
I’d like to know if this is with any clay machine I have a atlas marcato 180
You'll need to check the pasta machine. My metal flaps were slotted into a gap on each side of the machine. Some machines have their flaps fussed to the rest of the machine.
@@JessamaTutorials thank you so much for taking the time to answer you’re tutorials have tought me so much ! You’re awsome ❤️
❤ hello what brand of pasta machine is that thanks
I used a Kmart brand.
Thank you
Very interesting. I don't use clay, but I often use colored dough. Is there any drawback to removing the fenders other than the look? I'm tempted to do this myself now.
No, I haven't had any trouble with the machines after the fenders have been removed.
@@JessamaTutorials ...you don't have to smash the fenders like you did to remove them. If you just undo the screws they come right off without destroying them. Much easier too.
Hi Jessama, thank you for the tutorial, very helpful. I left my pasta machine to my parent's country. That one was not very sturdy, and handle used to come out. Can you please suggest where I can get a good machine for polymer clay projects. May I know from where you bought yours?
I'd recommend a Jamie Oliver machine if you can get one. That's the best one I've had. Most of mine are cheap ones from Kmart.
@@JessamaTutorials thank you Jesssama, I will check it.
Thank you. This brilliant.
Hi there, i have cleaned my machine in all places i can see, but i am still getting streals of black clay on my white clay especially on thin settings. What do i do?
I get that on my pasta machine to. I use this trick to prevent it. th-cam.com/video/4phbnhXQGag/w-d-xo.html
Thanks Samantha, very helpful. I didn’t even know there were blades near the rollers. Can you provide a link to the pasta machine with metal blades? Thank you
I'm afraid I can't find the machine I bought on eBay. I bought it a few years ago.
Awww too bad. Do you currently recommend a particular pasta machine. How would I know if a model has plastic blades? I was looking on Amazon but didn’t see any designation although I only looked superficially as I was looking for the brand you mentioned.
Right now I am using an actual pasta machine but it’s bigger and bulkier. I want to get an actual polymer clay “pasta” machine.
I'm afraid it's luck of the draw. I didn't know the machine had metal blades before I bought it. Most machines have the plastic blades I'm afraid. Older machines are more likely to have metal blades.
Jessama Tutorials 😞
@@safehavensanctuary-hollyg.8814 I got this pasta machine from Amazon and it's all stainless steel! I really like it, does the job :) www.amazon.co.uk/dp/B072JH952T?ref=ppx_pop_mob_ap_share
Merci pour cette vidéo très utile, cela marche t il pour toutes les marques de machines? J'ai une Atlas180? Merci
No. This won't work with all machines. You need to check that the fenders are attached the same way as mine before trying to remove them. It's fairly easy to see if they are attached by four small flaps or if the whole thing is attached.
@@JessamaTutorials merci beaucoup je vais essayer
I was able to remove the fenders off my Atlas 180 using this plier method - it was tough, since the metal is quite strong, but with patience and strength (I did have “guy” help) they’re now off!!!
I love your videos, there are my favourite on YT. Can anyone answer if I can do this to the Makins clay roller?
Brilliant...thanks so much. I’m off to get rid of mine now 😃 👌
Thank you that's a great idea.
So helpful. Do you need to put the fenders back on after cleaning?
No. You keep the fenders off.
Just had ago...its so nice & easy to do. Thank you
Thank you! So important to know!
Do you put the fenders back on or leave them off? I have an older machine with metal blades on the bottom. I’ve not been able to clean it properly and always makes such a horrible noise when I turn the crank. Bought a new pasta machine and haven’t used it yet. But I can see now it has plastic bottom blade. Wouldn’t of known that without this video. Thank you!
I leave the fenders off. They don't serve a purpose for me and it's easier to keep them off.
Jessama Tutorials oh that’s good to know! I just got an atlas 150 and if I can still use it with the fenders off that would be nice.
Thank you for this tutorial. I am new at this and am trying to figure out why my clay keeps sticking to the other roller. I can't figure out what I'm doing wrong. Just when I'm all ready to start my adventure. Any ideas? I love your work though. But I keep running into roadblocks.
Do we need the fenders??
No. The bottom blades, yes, but the ones I removed, no.
Brilliant, thank you!!
Большое спасибо за совет. Я ни как не могла хорошо почистить свою машинку. Теперь я знаю, что надо делать... Правда, было бы замечательно, если бы можно было снять и нижние пластины... И все же, огромное спасибо за видео...
Can I sandwich the clay between two pieces of fabric or paper?
Paper will work. Keep in mind though that the paper will leach the clay.
Jessama Tutorials What about fabric? Take the blades off and have paper, fabric, or some other material. Is there a better material that can be used?
you can use plastic instead, like page protector pockets, cut apart.
Jan Dorr Have you tried that!
Great tip ! Do you think I can make it on an Imperia ?
Yes. The Imperia is a pretty good pasta machine from what I've heard.
Awesome!!! And brilliant!
Can you please recommend the best brand pasta roller for rolling clay?
An Atlas machine is the best, but I use cheap ebay machines that I replace each year.
Thank you so much!
Thank you sooooo much! So helpful!!!💜
Da da. Thank-you for showing this. Easy.
Yaaaasss thank you for sharing!!!! ✌💕
I made a rookie mistake of using pointy metal stuff to clean the blades, leaving it with dent. Any advice how to fix?
I'm afraid not. They're dented permanently now.
Thank you!!!
ET on l'achète ou cette machine? Pas de liens!!!
Would this also work with an Atlas 180?
I'm not sure. I've never owned an Atlas. You'll need to check that it's attached the same way as mine before trying to remove the fenders.
@@JessamaTutorials ok thank you!
I was able to remove the fenders off my Atlas 180 using this plier method - it was tough, since the metal is quite strong, but with patience and strength (I did have “guy” help) they’re now off!!!
Very helpful.
Are the blades necessary too (sorry perhaps stupid question). wondering if the rollers are enough? This would be even easier to clean as my clay still gets caught in there
Yes. Cleaning the blades is the most important part. The clay get stuck on them and will slowly chip away while you're rolling.
The blades are necessary to keep the clay from sticking to the rollers and wrapping back around again.
Thanks 👍💛👍