Your'e the first one on youtube doing the right way... OK...here are some tips, to speed up the process a little you can stop the wheel by hand a little from rocking too much, when done rocking, mark exactly the top opposite side, [lighter side] where you mount a weight and never be moved again, the two other weights mount always the same distance from the permanent weight until balanced. Go dresse it and balance again on a new wheel....DANGER...a new wheel can be badly out of balance, if not balanced, a good idea is to just hit the on and off button and dress..not to go full speed until wheel dresses round. I wouldn't advise to dress without being balanced first on very large wheels.
Konely King hello sir,would it be possible if you just first don't place yet the weights and let the wheel sway/rock by itself to determined which side is the heaviest. then that's the time to place the weights opposite to that area/side of which is heavy and make adjustments on those weights to minimize the swaying/rocking of the wheel
Hello kaiok1777 thanks for your response , Arrow is used for mounting purpose . Please visit these links for more clarification regarding arrow . 1. www.highspeedtraining.co.uk/hub/grinding-wheel-marking-system/ 2. www.nortonabrasives.com/en-us/resources/expertise/mount-up-mount-down-arrows
I don't like balance anything like this top of bearing. If this axel running top of smooth steel bars there is much less friction. Now all bearing and ball inside perhaps twenty of them and four surface contact axel. It is much more contact surfaces than Axel lean only top of two bars. I also see good points of this method anyway :D
Jan Tikkanen in my experience of this kind of balancing grinding wheel such as this one,you need patience and the ability to minimize the swinging movement of the wheel by using counter weights
only once will I dress the wheel before mounting it to the machine, got it .but what will you suggest if in case I have to change the wheel because it is already small but I don't have to removed the weights on the flange.would you allowed that?thanks
Johnny Benson Thank-you for you query . Centerless grinder is a grinder for production of cylindrical work in which centers are replaced by a work-supporting member and two abrasive wheels one of which grinds work while the other regulates the speed of its rotation . It is cheaper than "on center" grinding and much faster.
Thank-you JC Mills for the comment . This is an old method of balancing the grinding wheel , the video was made 5 years ago . At present , we have automated balancing system for grinding wheel . For more information visit bhagwansons.co.in/
I love simplicity.You guys are doing awsome work ...
Thank-you for your response.
At last good to see someone correctly balacing a grinding wheel.
Used to do them over 3ft dia
Thank-you Jonny for your response :) Appreciate it .
What's the A60??
Hi we use cumi wheels, its the specification of wheel. You can check their website www.cumi-murugappa.com/
Excellent Video Guys. Always nice to learn something new, something old.
Thank-you ,Graham O'Keeffe for your response .
Visit www.bhagwansons.com for more :)
3m grinding wheel install
Centreless grinding work place above the line joining the two wheel centres... as above
Thankyou Sir for your response :)
Visit www.bhagwansons.com
Good work guys 🥰
Thanks!
Your'e the first one on youtube doing the right way...
OK...here are some tips, to speed up the process a little you can stop the wheel by hand a little from rocking too much, when done rocking, mark exactly the top opposite side, [lighter side] where you mount a weight and never be moved again, the two other weights mount always the same distance from the permanent weight until balanced. Go dresse it and balance again on a new wheel....DANGER...a new wheel can be badly out of balance, if not balanced, a good idea is to just hit the on and off button and dress..not to go full speed until wheel dresses round. I wouldn't advise to dress without being balanced first on very large wheels.
Hello , Konely King . Thank-you for your response , we'll surely try it and get back to you . Please visit www.bhagwansons.com/ for more information .
Konely King hello sir,would it be possible if you just first don't place yet the weights and let the wheel sway/rock by itself to determined which side is the heaviest. then that's the time to place the weights opposite to that area/side of which is heavy and make adjustments on those weights to minimize the swaying/rocking of the wheel
Is there some standard for this?
Thanks +Evandro Wilson Rodrigues for your query . Kindly visit www.bhagwansons.com for more information :)
What are the process parameter to control product quality.
I think size majoring with micrometer depending on the given tolerance and surface finishing RA value given in workpiece opretion standard🙂
Sir can we apply same procedure for balancing cylindrical Center grinding wheel?
Yes Sir of course .
@@Bhagwansons thanks
Not balanced..
Wheel's rotation speed is also important.
Wheel clock wise and anticlockwise speed is difference..
Not properly balance..
This is stationary balancing not harmonic
i want this mashing plz tall me prise
Hello , Rabbanni Khan
Please email us for the cost of the unit . Thanks . www.bhagwansons.com/
Sar please ak halp
Please visit our website for more details bhagwansons.co.in/
What does the arrow on the stone mean?
Hello kaiok1777 thanks for your response , Arrow is used for mounting purpose . Please visit these links for more clarification regarding arrow .
1. www.highspeedtraining.co.uk/hub/grinding-wheel-marking-system/
2. www.nortonabrasives.com/en-us/resources/expertise/mount-up-mount-down-arrows
@@Bhagwansons oh about the arrow on the wheel, will it be OK for you if I place on which side I want to,it doesn't have any significance,right
@@mykovrivera3716 Yes . Rest you can try doing like it .
나도 해봤습니다 .
감사합니다. 자세한 내용은 www.bhagwansons.com/을 방문하십시오.
How to set vibration setting
Why don't ya make em perfect out of the box?
Hello, we are machine manufacturer. We use grinding wheels of cumi group :)
I don't like balance anything like this top of bearing. If this axel running top of smooth steel bars there is much less friction. Now all bearing and ball inside perhaps twenty of them and four surface contact axel. It is much more contact surfaces than Axel lean only top of two bars. I also see good points of this method anyway :D
Hello, Jari tikkanen thanks for your comment . Please visit www.bhagwansons.com/ for more information .
Hello nanda kumar we manufacture centerless grinding machines only , so it would not be possible to upload cylindrical grinding wheel balance .
Jan Tikkanen in my experience of this kind of balancing grinding wheel such as this one,you need patience and the ability to minimize the swinging movement of the wheel by using counter weights
Good job
Thank you for your response. For more info visit us at www.bhagwansons.co.in
My masheen are toomuch vibrashan sar
Please contact us on our email or call us. Thanks .
❤❤
Is grinding ki price batao
Dear sir , May be you have confirmed the price otherwise please contact one of our office representatives who will help you . www.bhagwansons.com .
So i need to improve myself
Thanks Jian Luid Smith for your response , please visit www.bhagwansons.com/ for more information .
only once will I dress the wheel before mounting it to the machine, got it .but what will you suggest if in case I have to change the wheel because it is already small but I don't have to removed the weights on the flange.would you allowed that?thanks
@@mykovrivera3716 I think not need to remove the weight but some adjustment is need to be
Gadasa grendar karne ka machine dikhaye
Thanks @Puja Singh for your response .Kindly visit www.bhagwansons.com for more information :)
nic video
Respected Sir +vinay mishra
Thank you for your response for more in depth details visit www.bhagwansons.com :)
why centerless?
Johnny Benson Thank-you for you query . Centerless grinder is a grinder for production of cylindrical work in which centers are replaced by a work-supporting member and two abrasive wheels one of which grinds work while the other regulates the speed of its rotation . It is cheaper than "on center" grinding and much faster.
Thanks ***** for your response .Kindly visit www.bhagwansons.com for more information :)
无心磨
What a beautiful wheel, sad i know 😅
Balancing ok hogi to vabration bhi nahi hota
Oche vamos do começo dez de quando tira o rebolo velho da retifica ok
40 macron ki oblti h
Please visit our website for more details bhagwansons.co.in/
C. G
too much noise in the background cant hear the guy speak
Thanks anquin Adams to hear that . We will upload a new video soon on youtube which will explain how to do centerless grinding wheel balance .
@@Bhagwansons awaaz to tan bai Punjabi lagde😁
अरे भाई बेलेंस करते वक़्त अगर बोलते भी की ये सब कैसे होता है तो और अच्छा होता
Thanks Rajeev panchal for your comment . Your comment helps us in improving our standard .
@@Bhagwansons bhai ye video dubara dalna or voice quality bhi acchi honi chye ok
Auto balancing: th-cam.com/video/Xyr5UZKryiw/w-d-xo.html
how long you want to balance this, and who is gon pay for- the customer????? no, bulllshit on you. we have electronics now----wooooouuuuuw
Thanks +hans-juergen rasch for your time .We also have electronic wheel balancing unit . Kindly visit www.bhagwansons.com for more information :)
Bhagwansons Centerless grinders o
That I think wouldn't be a concern for India...parts done for maybe a fraction compare to yours...but they can sell you one.
too slow and not done right to begin with. The wheel should have been balanced in 1/4 the time or less.
Thank-you JC Mills for the comment . This is an old method of balancing the grinding wheel , the video was made 5 years ago . At present , we have automated balancing system for grinding wheel . For more information visit bhagwansons.co.in/
I m opretar 8178835742