Excellent video, I agree that the 'English' instructions this comes with aren't very clear. I actually purchased this in haste when I saw the word 'differential' in the description, as I need a differential function for a pump on a solar system (measure difference between the exit on the boiler and the exit on the solar tubes). Unfortunately this doesn't do that, unless you know of a hack?
I bought one for 220 V. It works apparently but when the lights go up indicating it should light a lamp, for example, it doesn't. What am I doing wrong? If it is 220 V the output should also be 220 V, right? Then I could connect a black light lamp of 75 watts. Well, this is the theory I thought worked on it. But it doesn't. It receives the temperature, but when it should connect or disconnect another device (either cooling or heating) it doesn't. Can anyone help me? I must be doing something wrong. And the instructions that come with it are not very helpful. Will contactors be needed?
Hello. I want to connect to 12v fans on each side. But when i connect my fans to each side of the output cables they dont switch on, controller is programmed and green light is on. But there is no power on the fans…. I connected + of controller on + of fan cable, same with the neagtive side of the controller output cable. Maybe i wired it wrong? There are no wiring diagrams on the internet for this….
Thanks Sir for the English instruction. I purchased the Machine from india. I tried to wire it but it doesn't supply power to the lights. Sad not I don't know where I did mistake.
Very helpfull .thanks!
Excellent video, I agree that the 'English' instructions this comes with aren't very clear. I actually purchased this in haste when I saw the word 'differential' in the description, as I need a differential function for a pump on a solar system (measure difference between the exit on the boiler and the exit on the solar tubes). Unfortunately this doesn't do that, unless you know of a hack?
I bought one for 220 V. It works apparently but when the lights go up indicating it should light a lamp, for example, it doesn't. What am I doing wrong? If it is 220 V the output should also be 220 V, right? Then I could connect a black light lamp of 75 watts. Well, this is the theory I thought worked on it. But it doesn't. It receives the temperature, but when it should connect or disconnect another device (either cooling or heating) it doesn't. Can anyone help me? I must be doing something wrong. And the instructions that come with it are not very helpful. Will contactors be needed?
Hello. I want to connect to 12v fans on each side. But when i connect my fans to each side of the output cables they dont switch on, controller is programmed and green light is on. But there is no power on the fans….
I connected + of controller on + of fan cable, same with the neagtive side of the controller output cable. Maybe i wired it wrong? There are no wiring diagrams on the internet for this….
Thanks a lot, if your video isn’t there I have to return this.
Great video! One question, are the parameters retained after power-off? I have one of these and the histeresis is not being retained
It yellow and black switch on (-) ??? Ore is that yellow (+) black (-)???
Thanks Sir for the English instruction. I purchased the Machine from india. I tried to wire it but it doesn't supply power to the lights. Sad not I don't know where I did mistake.
So this is only available in 1 degre step setting? not 0.1 step?
I have one an one side shows LLL do you know what that means
I’m looking for 240 input supply
It can be use by chicken egg incubator??
Mine works on 110 volt not 12 volt. Same model numbers.
Thank you sir. i couldnt find any datasheet other than chinese. i would like you to tea served in Turkey.
Em português
Bull shit. I do it every day