If you don't like the generic switch you can buy factory combination headlight/fog switch. Power wire connects it to the factory wire harness near the fuse box on the left side motor & add a fuse. That's if want a cleaner look. Don't have run any wires to the aftermarket switch anymore. Since the all Honda's are pre-wired. I actually like the smoked lenses you got!
Can’t believe you took the bumper off..... did mine in 15-20 min. Cover just poops out and you stick them same way they come out, run your wire pry it to the current blue fog light conector, add relay and fuse .... also buy inside cabin switch original oem from the touring. Cheers
I previously watched a video of the install and they removed the front bumper so I did too lol. It was fine though as I will need to remove it to repaint it someday. As for a switch, I have none since I always want them on anyway as DRLs so I'm using a fuse splicer (whatever it's called) connected to the fuel pump.
This video was helpful I just put a pair on a 2014 EX today and I even did it without taking the whole bumper off thanks to this video. .. lol btw luckily mine came with a perfect fitting switch.
Great video man good installer got some funny clips on there you could actually buy the turn signal switch from the dealer that already have the fog light switch built-in much cleaner look good luck man
Amazing video, I have the same fogs same brand as well, unfortunately the switch didn’t fit cause I also didn’t like the way it looks, even in the description when I got them, it say THE SWITCH FITS PERFECTLY “WRONG” and I ended up taking it to the shop and they splice with the low beams which it works perfect, thank you for an amazing video
I watched this video a while back and then I got a second 2014 EXL and I discovered the spot where you put in the fog fog lights those things just pop out of the grill where the fog lights go.. You just got to take the bottom plastic off below the bumper to run your wires. And there will be a screw underneath that plastic under the fog light that goes into the fog light bracket that holds it in place from the bottom.
Yeah I probably didn't have to but I felt I could install the harness better with it off. Plus I also plan on repainting the bumper later so it's nice to know how it's installed.
What’s the black leather strip on the hood called and where did you buy it from? I really like that Please send me the link if possible...I have 2016 Honda Odyssey SE version
I used Calais 9005 yellow LEDs but am currently using YLife 6000k white LEDs. But regardless of LEDs I am using an anti-flicker resistor on them to avoid error.
Calais LED bulbs which are now unavailable after I checked. I switched to these www.amazon.com/gp/product/B07SBGMBCF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Lol how are there no comments in this video. The way he threw down those covers 🤣
That's how I felt this guys, is not careful at all
Those hands on special effects are second to none Sir. Those were awesome!
If you don't like the generic switch you can buy factory combination headlight/fog switch. Power wire connects it to the factory wire harness near the fuse box on the left side motor & add a fuse. That's if want a cleaner look. Don't have run any wires to the aftermarket switch anymore. Since the all Honda's are pre-wired. I actually like the smoked lenses you got!
Can’t believe you took the bumper off..... did mine in 15-20 min. Cover just poops out and you stick them same way they come out, run your wire pry it to the current blue fog light conector, add relay and fuse .... also buy inside cabin switch original oem from the touring.
Cheers
I previously watched a video of the install and they removed the front bumper so I did too lol. It was fine though as I will need to remove it to repaint it someday. As for a switch, I have none since I always want them on anyway as DRLs so I'm using a fuse splicer (whatever it's called) connected to the fuel pump.
This video was helpful I just put a pair on a 2014 EX today and I even did it without taking the whole bumper off thanks to this video. .. lol btw luckily mine came with a perfect fitting switch.
Ollll
Lolll
Hi what brand of fog lights did you get and where?
How did you do it without taking off the bumper
You’re so funny 😂 I love your tutorials, do you have any upgrades in your sound system?
Thanks. No I don't have any sound system upgrades......yet.
Great video man good installer got some funny clips on there you could actually buy the turn signal switch from the dealer that already have the fog light switch built-in much cleaner look good luck man
Thanks. I'm actually no longer using a switch. I'm using a fuse splitter to splice them to my fuel pump since I want them on like DRLs anyway.
@@dandoesjunk7546 nice
Amazing video, I have the same fogs same brand as well, unfortunately the switch didn’t fit cause I also didn’t like the way it looks, even in the description when I got them, it say THE SWITCH FITS PERFECTLY “WRONG” and I ended up taking it to the shop and they splice with the low beams which it works perfect, thank you for an amazing video
I watched this video a while back and then I got a second 2014 EXL and I discovered the spot where you put in the fog fog lights those things just pop out of the grill where the fog lights go.. You just got to take the bottom plastic off below the bumper to run your wires. And there will be a screw underneath that plastic under the fog light that goes into the fog light bracket that holds it in place from the bottom.
lol, Van goals
You are a funny Dude I was like did you have to take off the whole bumper but I feel you have more room to work on it👍🏾
Yeah I probably didn't have to but I felt I could install the harness better with it off. Plus I also plan on repainting the bumper later so it's nice to know how it's installed.
@@dandoesjunk7546 i hear you Good job and Thanks for sharing ow I will know exactly how to do mines Bro
WHERE DID YOU GET THE AFTERMARKET KIT? I´M THINKING ON GETTING MINE ON AMAZON.. ABOUT 60 BUCKS..
I got mine on Ebay for about the same price.
u have link to buy the fog light and the led light ?i have a ex-l too trying out fog in mine
where u get ur hood visor ? can u share link to buy???
What’s the black leather strip on the hood called and where did you buy it from? I really like that Please send me the link if possible...I have 2016 Honda Odyssey SE version
It's a hood bra mask. Sorry no link because I bought it used off Ebay.
Thank you
What kind of bulbs did you use for DRL and did you have to relay to resistor to avoid DRL error light? Nice video btw
I used Calais 9005 yellow LEDs but am currently using YLife 6000k white LEDs. But regardless of LEDs I am using an anti-flicker resistor on them to avoid error.
@@dandoesjunk7546 salamat! Thanks for the quick reply. I love the look of the yellow DRLs. Why did you end up getting rid of them?
Although the yellow looked good, I wanted something brighter. Also went white with the foglights.
@@dandoesjunk7546 do you like the white better? I find yellow is better for visibility. At least to my eyes
@@dandoesjunk7546 also, did you have to use a resistor on the fogs or just the DRLs?
Where did the green wire go
I want to go back to the 2014 fug light I like more this old ones, I don't like 2015
Hi where did you find the hole to run the wire to inside?
I poked a small hole into one of the existing rubber harness grommets
What DRL yellow leds did you get?
Calais 9005
@@dandoesjunk7546 thankss!
what bulbs are you using bro.?? 😮
Calais LED bulbs which are now unavailable after I checked. I switched to these www.amazon.com/gp/product/B07SBGMBCF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I feel like the ones on the 11-13 looked better than this one..
I was thinking of converting to those even though I have a 2014 just to change up the look a bit.
@@dandoesjunk7546 yeah , you should check and see I'm sure with the yellow tint they will look better, anyways you did an amazing job 🙌
Do you have the link? Thanks
www.ebay.com/itm/Fit-2014-2017-Honda-Odyssey-Bumper-Fog-Lights-Lamps-L-R-w-Switch-Bulbs-Wiring/172291795744?fits=Year%3A2014%7CModel%3AOdyssey&epid=4017017647&hash=item281d642b20:g:D9UAAOSweLZend11