Honda Odyssey 2005-2010 - Aftermarket Fog Light + OEM Switch/Harness Unboxing & Detail installation.
ฝัง
- เผยแพร่เมื่อ 4 ก.พ. 2021
- Honda Odyssey 2005-2010 - Unboxing and detailed installation with OEM switch
for updates check the thread below.
www.odyclub.com/threads/diy-a...
Thank you for posting this. I just completed the install with an OEM fog light switch from the junk yard today. Your wiring helped me so much when it came to the OEM switch.
Amazing! Happy to help 👍 clean installation is the best way to go. Any questions let me know.
Cleanest and very well detailed installation i've seen 🙌 thank you.
Happy to help 👍 any question let me know.
Professional installation
Thank you, happy to help 👍
I opted to use the thinner trigger wire(red) and tied it to my marker/parking lights, that way they only turn on when my markers, or headlights are on.
Yeah that's a good idea as well. I just wanted to be able to use it independently regardless if the lights were on or not. But hey, thanks for sharing 👍
10amp fuse? And what is the blue wire you ran through the grommet? Did you cut and splice the switch harness?
Correct, 10amp fuse. The blue wire is for the switch. The switch harness was not splice, instead converted to the OEM.
@@kaimanson3174 Hmm, my fog light kit must be different then. Came in the same box, but I don’t have that blue wire leading to the switch harness with a disconnect point. I’d have to run the harness connector the whole way, which means I’ll probably have to cut it off and solder it back on inside.
@@DanSwensonVideos try first to lay down the wire harness like I did on the beginning to understand the layout. Once everything is connected and lights up. Then go with the installation.
@@kaimanson3174 My kit was def different. The switch wiring that went into the cabin was not detachable, I had to cut off the harness and solder it back on after running the wires. I also only had power to connect inside, no ground. I used the after market switch it came with, it fits in the cluster with the slider door switches. It’s not perfect, but that OEM switch AND harness connector is tough to find. I’ll keep looking. Your vid was awesome for showing me how to get the wire inside, so many thanks for that. 🤙🏻
Do the fog lights turn off on High beam or are they on all the time? Great video
They work independently from low or high beam. Lights can be turn on/off via the dashboard button or if on....then they will go off once the car go off (acc).
Great video. I had to laugh at the 'Useless Instructions'. So true. Where did you pick-up the OEM switch and harness?
True brother, those instructions I don't think can't even be used to light up some charcoal. I got it at my local LKQ, yesterday I was able to get the actual OEM fog lights switch from a 05 Ody. The one I used for the video is the on/off switch for the parking sensor, which works perfectly as a on/off for the fog lights as well, can be easily found in a touring ody.
Congrats
Where can I buy this kit? Does anyone have a link? Great video btw
I believe I got mine from eBay. There are quite a few aftermarket kits online (ebay, amazon). Each can come with different wire colors or switches.
What do u call those metal things on 5:38?
Spring nuts. Those came with the kit
Positive trigger wire, where I need to connect?
Which fuse ?
@11:40 - fuse 29.
@@kaimanson3174 how are you?
@@maxwellgudiel8533 great, thank you for asking. How about you? How is the installation coming along?.
@kaimanson I don't start yet I need some help I got a idea but one wire make me going crazy
@@maxwellgudiel8533 do what I did at the beginning of the video, test all the connections out before starting the installation. Once you confirm that everything works. Then it is just a matter of running the wires.