After flying the 3" freestyle for 120 hours on Uncrashed and getting the Axis 3.5 upgrade frame for my Avata I decided to get this drone. I want something that fking rips and this is it!
Great video fam! I also have the manta 3.6 and love it. Lots of people cry about the weight but it flies great and is durable. Honestly, I've been damn near enjoying the smaller drones more than my 5 inch. They're just so agile and fun and can go places the big boys can't.
bro you gotta turn EIS on in camera settings or run that flight footage through gyroflow(free & easy)! either one will make a big difference for stabilizing the flight footage. 😎👍
Yo tie, I built this drone and it does fit 4-in props. It flies amazing. The larger crop surface ads flight time and agility. I don't run a GoPro. The 03 is good enough.... Amazing review. @@TyDoesTech
@@BeautyBeastRCAlso the version that you build the side plates are now hard plastic and do not snap on, they go over the standoffs and seals it in completely. Still amazing looking though. I used 2105 1950kv RCINPOWER motors. This quad is a beast. Try the larger props and you won't be disappointed. 💯💯💯💯👍🏼
I built a drone with this frame and it rocks. I love it. I'm using an Axis Stack and hyperlite motors and this thing flies like a DREAM. DJI O3 air unit with no props in shot makes this a go to drone for some awesome video.
That sounds so awesome ! I actually want to get a smaller drone to see how it flys as well. I have my eye on one in particular. Thank you for tuning in !
I just got mine in (walksnail avatar pro / elrs edition). I have to still do the betaflight setup and bind to a controller but this video has me excited to fly it.
Nice vid sir. Have the Manta 3.6 and absolutely love the power this thing has. 1200mah - 1300mah seem to last forever as well. I have the walksnail version and the biggest miss is the camera sticks out of the frame and have already had to replace the lens, but the camera cage holds up. Arms are a little sketchy since I broke one close to the motor but Axis Flying does have replacements on their site.
yes! slightly windy. I did some flying prior to filming this video on a day where the weather wasn't as bad and didn't notice as much wobbling at all. BUT I wasn't trying to "freestyle" like I was in this video either. Just casually flying, doing a few flips here and there. There is also a recommended PID for this drone as well but I opted to use my own rates.
Usually it’s the UART in beta flight that has the MSP (Not next to a computer to check the exact abbreviation right now) checked off. Assuming you’re talking about the O3 (if it’s prebuilt) If not then you’ll need to buy your own receiver and put it on an available UART of your choosing
Ha! I'm in your area. I watched this review as I'm about to get this from Getfpv. Maybe once I learn a few things I'll see where yoyu are on a good day @@TyDoesTech
Im new to the fdv drone hobby and i just got the manta 3.6... to my surprise after trying to contact axisflying they told me that the c224 2750kv motors are discontinued!! I wanted to order some so I can have some spare parts. Can someone help me with what motor can I use? Will different motors mess with the configs and flying of the drone? Unfortunatly I dont have this kind of knowledge! If someone can help me that would be really appreciated!
See if you can order them from somewhere else. I looked it up and saw a few other sites that carry them. Newbeedrone, AddictiveRC, GetFPV, Heli Direct. As for a complete replacement for when stock dries up. I’m not sure. And it looks like axis does have the motor just not the 2750 kv version. Only the 2300kv and 3500kv. For 6s you’ll need the 2300kv according to the site.
Yea they have a recommended PID they've already setup on the quad but I used my own rates. But I agree there were some jitters, but It was also pretty cold and slightly windy haha
After flying the 3" freestyle for 120 hours on Uncrashed and getting the Axis 3.5 upgrade frame for my Avata I decided to get this drone. I want something that fking rips and this is it!
Great video fam! I also have the manta 3.6 and love it. Lots of people cry about the weight but it flies great and is durable. Honestly, I've been damn near enjoying the smaller drones more than my 5 inch. They're just so agile and fun and can go places the big boys can't.
bro you gotta turn EIS on in camera settings or run that flight footage through gyroflow(free & easy)! either one will make a big difference for stabilizing the flight footage. 😎👍
Yea I haven’t ventured into using gyroflow yet. I think there’s a new plug in for Davinci I want to try as well vs the app itself.
@@TyDoesTech thanks for the heads up on the davinci! thats what we use as well and had no idea about a gyro plugin. 🤣
Yo tie, I built this drone and it does fit 4-in props. It flies amazing. The larger crop surface ads flight time and agility. I don't run a GoPro. The 03 is good enough.... Amazing review. @@TyDoesTech
@@BeautyBeastRCAlso the version that you build the side plates are now hard plastic and do not snap on, they go over the standoffs and seals it in completely. Still amazing looking though. I used 2105 1950kv RCINPOWER motors. This quad is a beast. Try the larger props and you won't be disappointed. 💯💯💯💯👍🏼
I built a drone with this frame and it rocks. I love it. I'm using an Axis Stack and hyperlite motors and this thing flies like a DREAM. DJI O3 air unit with no props in shot makes this a go to drone for some awesome video.
That sounds so awesome ! I actually want to get a smaller drone to see how it flys as well. I have my eye on one in particular. Thank you for tuning in !
@@TyDoesTech I built a 3 inch that flies really great too. You gonna build or buy a BNF?
The flylens85 flies awesome if you're going BNF
I just got mine in (walksnail avatar pro / elrs edition). I have to still do the betaflight setup and bind to a controller but this video has me excited to fly it.
It’s super fun man. Let me know what you think!
Nice vid sir. Have the Manta 3.6 and absolutely love the power this thing has. 1200mah - 1300mah seem to last forever as well. I have the walksnail version and the biggest miss is the camera sticks out of the frame and have already had to replace the lens, but the camera cage holds up. Arms are a little sketchy since I broke one close to the motor but Axis Flying does have replacements on their site.
How do you like walksnail? I've been thinking of switching things up and either going walksnail or HDZero.
Last question, I promise. Whats the ELRS firmware target for the BnF?
I could hear the motor jitter and video was wobbling a bit ... Was it windy?
yes! slightly windy. I did some flying prior to filming this video on a day where the weather wasn't as bad and didn't notice as much wobbling at all. BUT I wasn't trying to "freestyle" like I was in this video either. Just casually flying, doing a few flips here and there. There is also a recommended PID for this drone as well but I opted to use my own rates.
Excellent review and video style. +1 sub from France 🇫🇷 👍
Thank you !
I have two Flywoo explorers and mostly fly those and use a runcam thumb pro and stopped flying my 5inch quads two years ago 🙏🏿
I really want to build one of these. I've been thinking about a Siren F3 split. I think a 6s 3.5 freestyler would be sick!
Does the manta 3.6 come with a beeper installed?
Yes!
@@TyDoesTech thank you sir!
Nice flying. Those are not the stock rates are they?
Thank you! They are not stock rates
Do the drone work with the DJI Controller 2?
Yes, it should. You just have to bind it with the O3 Air Unit
Hey, which UART Channel does the PNP operate on, AxisFlying doesn’t have any instructions on the drone/ site. Any help would be appreciated.
Usually it’s the UART in beta flight that has the MSP (Not next to a computer to check the exact abbreviation right now) checked off. Assuming you’re talking about the O3 (if it’s prebuilt) If not then you’ll need to buy your own receiver and put it on an available UART of your choosing
Excellent video and review. Subscribed. ✌🏾❤️
Thank you ! I'm happy you enjoyed it and thank you for subscribing !
Oh wow, this was a hella good video ngl
Thank you ! I appreciate you
Where are you in KY? What park is that? I’m in Shelbyville.
I'm in Lexington at Jacobson Park. Shelbyville is right up the road !
Ha! I'm in your area. I watched this review as I'm about to get this from Getfpv. Maybe once I learn a few things I'll see where yoyu are on a good day @@TyDoesTech
Ficou bom demais
Vety nice machine.
Nice review 😉 Yes, is it is a rocket. Mine has already riched more than 200km/h 😀
Nice!!!!
Hi bro, Do you think it's possible to find a TPU support for the O3 antenna somewhere?
tbh I feel as if you would have to have one made for this particular drone.
Im new to the fdv drone hobby and i just got the manta 3.6... to my surprise after trying to contact axisflying they told me that the c224 2750kv motors are discontinued!! I wanted to order some so I can have some spare parts. Can someone help me with what motor can I use? Will different motors mess with the configs and flying of the drone? Unfortunatly I dont have this kind of knowledge! If someone can help me that would be really appreciated!
See if you can order them from somewhere else. I looked it up and saw a few other sites that carry them. Newbeedrone, AddictiveRC, GetFPV, Heli Direct. As for a complete replacement for when stock dries up. I’m not sure. And it looks like axis does have the motor just not the 2750 kv version. Only the 2300kv and 3500kv. For 6s you’ll need the 2300kv according to the site.
Very nice.
Thank you for watching !
Great video bro +1
Thank you!
Awesome video😎😎
Thank you my man! I appreciate you
Hi man, great fly! I make a build based on this frame and motor (but 2300KV) and stack 30x30. I think that is good. Have a nice day 👍
Thank you Thank you you have a great day as well my man !
it have to be tuned. jitters just crazy.
Yea they have a recommended PID they've already setup on the quad but I used my own rates. But I agree there were some jitters, but It was also pretty cold and slightly windy haha
Almost as heavy as a five inch