So cool to see Kareem making the wheels for the masterblade. He got around to that pretty quick! I imagine him as a crazy rollerblading, BMX scientist and it's awesome! If I could've bought the frame I would have, interested to see more of it in the future 👍
🙏🏻 I hope you enjoyed man, I believe you will always look up to people your all live.. no matter how big or small or you are. Watching and learning the good, the bad... Lots of love Lino ❤️
Good Roads (TH-cam) has 3D printer files for a longboard wheel mold, open-source, which I'm currently modifying for 60mm aggressive wheels. But to modify it for any other size wouldn't be too difficult.
I may be asking prematurely because I haven’t made it all the way through the video yet. But how and why determines the factor of durometer. Is that in your mix or an additive?
4 ปีที่แล้ว
Já tem 4 meses que estou tentando o PMC-790 sem resultados satisfatórios.
Check Kareem’s instagram. He has also made cored ones but so far these worked better. As they are 47mm for his own frames. Maybe with more “tire” like 54 and up would work better with core
What's the word on pressure VS vaccum? I've always seen people using vaccum chambers but pressure seems more accessible. I got a 3d printer and a pump lol!
@@freedomcaller pressure chamber is easier in my opinion and gets the same results for urethane. vacuum degassing eats up some of your pot life for the urethane and can be pretty messy as the urethane tends to bubble over.
@@freedomcaller I use a vacuum pump and chamber. Only need to degass for a few mins, if it starts foaming too much open the outlet valve on the chamber a bit until it settles and repeat as necessary. Both vacuum and pressure systems are readily available. Pressure pot/vacuum chamber and a compressor/vacuum pump respectively. Degassing removes the air and pressure makes the bubbles very very tiny. Different pros and cons for each.
There is this guy, _Good Roads_ on TH-cam, who has a really similar process of making skateboard wheels, but he makes them with cores. He gives lots of information, check it out!
How to make your own wheels at home....spend a couple of hundred £s on 3D printers and spend days upon days designing molds then spend a couple more hundred £s on urethane! Just buy some new wheels no?
Love your videos! I did however think the music was annoying and made it hard to focus... Regardless keep up the great work and have fun 😁😁💚
This is a classic ricardo blunder I haven't seen in a while. Loud music and soft voices.
Bro fr the music
Yeah, it's a bit distracting.
100% agree about the music
So cool to see Kareem making the wheels for the masterblade. He got around to that pretty quick!
I imagine him as a crazy rollerblading, BMX scientist and it's awesome! If I could've bought the frame I would have, interested to see more of it in the future 👍
Tha frame is honesty amazing and not having good enough wheels for the center was the on;y down... love to see what he is doing..
@Ricardo Lino do you know where I can get the 3d file for the mold mate?
This has been the longest 30 minutes. Who agrees ?? You know when you are a small skater. You always look up to people.
🙏🏻 I hope you enjoyed man,
I believe you will always look up to people your all live.. no matter how big or small or you are. Watching and learning the good, the bad...
Lots of love
Lino ❤️
@@RicardoLino I really enjoyed it. I think you should make a tutorial of how to skate backwards soon. I really wanna add that to my bucket list.
Wow i pull my hat! This is stunning! Awesome work Kareem. =)
It's blading season where I'm from brotha and I'm binge watching your channel once again lmfao
Every year hahahah
I've been waiting for this kind of video for a while ^^. Because considering the price of the wheels, the margins, the taxes, the transport price ;b
Industrial method:
th-cam.com/video/7hZz9jfo5AM/w-d-xo.html
Kareem is the chosen one to make kickrollers usable and kick-inlines possible, and bring balance to the Force 🙏
I’m sure they would be better that the trash that comes stock ;)
@@RicardoLino Please make proper kickrollers, PLEASE. Or kick inlines would be better... 🙏
Amazing video!
I wonder how do you decide the hardness?
Aaalmost 60k followers... congratz in advance bro 💪🏽
Super awesome, can't wait to see the frame sold as a combo and becoming more mainstream
I'd love to know more about this and make some Woooosh Skates wheels.
Are you from Newcastle? I am and I skate too! :o
Wish they had 3D printer plans to buy for rollerskate wheels I would love to be able to make my own.
i could make u the model if u still want
Good Roads (TH-cam) has 3D printer files for a longboard wheel mold, open-source, which I'm currently modifying for 60mm aggressive wheels. But to modify it for any other size wouldn't be too difficult.
Cool , i wish do this at home too )
Hi,I like rollerbladeing and i wonder how fast roller skade can go?
Ha ha, good question
Skate em Lino!
Ayyy that’s the nola homie Kareem
these wheels are coreless?
Yep shitty little rock hard wheels don't need a core
Kareem was the first ever aggressive skater I met! Definitely a stand up guy
Hardwork so nice. music plss.
I may be asking prematurely because I haven’t made it all the way through the video yet. But how and why determines the factor of durometer. Is that in your mix or an additive?
Já tem 4 meses que estou tentando o PMC-790 sem resultados satisfatórios.
dude is like, Walter White in the blading game^^ love it
The loud music while he was talking killed me
Is there any skate with 125mm 4 wheel?
The bgm is a bit too loud for me
super cool but how much does it cost to buy all that stuff? guess its way cheaper and easier just to get store bought...
Have the mold project to download?
How do you determine the duro whend mixing solutions?
Não tem como ....cada resina já é de uma determinada dureza ..
Well that just makes me appreciate my wheels all that much more lol.
super siiick...
ehheheeh :D
Hi bro can you help me for make skating hockey wheels 68mm 70mm 72mm
Cool stuff!
homemade rocket ship, just put nasa in ur basement...
You pressurized 70-80 psi but my pressure chamber has 4,2 bar (60 psi) max. Would it be enough?
seen people doing 50-60psi and smooth on recomends 60 for this resin on their website.
@@Slouch420novato.... Qualquer pressão acima de 60 já é perca.....
Bouf, music is way to loud, but great video though
HOLY SHIT THATS KAREEM! Badass shit!
Coreless?
Check Kareem’s instagram. He has also made cored ones but so far these worked better. As they are 47mm for his own frames.
Maybe with more “tire” like 54 and up would work better with core
Класс , тоже хотел бы дома делать колёса )
What's a wheel cost to make yourself? 50 cents? $5?
usually 2-3 dollars unless you can afford some resin in bulk
I'd love to hear what he's saying instead of the loud screeching EDM.
omg so cool
Com o preço da roda no Brasil tô quase fazendo isso 😬😬😬
Drop the music please
Whoa
With everyone at home people are challenging the diy boundaries 💪🏻
what the hell they were rollerblade wheels..
Hello
Hey Roz, hope you enjoy it
Make some 80’s lmao
Was really interested in seeing the video, but couldn't hear I've the annoying loud background music
Can we have a repost without the shitty music background so I can focus on what he is saying please ?
Eurethane looks like SmoothOn Task 14. They carry different mixes for hardness too. Alternative to pressure pot would be degassing prior to pouring.
yeah its the task 14 but I recommend using pmc 790. I like the properties a bit more so far. Havent tried rolling the task 14s yet haha.
What's the word on pressure VS vaccum? I've always seen people using vaccum chambers but pressure seems more accessible. I got a 3d printer and a pump lol!
@@freedomcaller pressure chamber is easier in my opinion and gets the same results for urethane. vacuum degassing eats up some of your pot life for the urethane and can be pretty messy as the urethane tends to bubble over.
@@freedomcaller I use a vacuum pump and chamber. Only need to degass for a few mins, if it starts foaming too much open the outlet valve on the chamber a bit until it settles and repeat as necessary. Both vacuum and pressure systems are readily available. Pressure pot/vacuum chamber and a compressor/vacuum pump respectively. Degassing removes the air and pressure makes the bubbles very very tiny. Different pros and cons for each.
it was all good until "special chamber" haha
get rid of the background music
There is this guy, _Good Roads_ on TH-cam, who has a really similar process of making skateboard wheels, but he makes them with cores.
He gives lots of information, check it out!
He also has videos about coreless wheels now.
Couldn't watch the video. The music is WAYYYY too loud. Very distracting (annoying).
lol yay
How to make your own wheels at home....spend a couple of hundred £s on 3D printers and spend days upon days designing molds then spend a couple more hundred £s on urethane! Just buy some new wheels no?
Anti rocker wheels? Who cares about them? Make some out of wood on a lathe.
Let’s see some proper wheels made.
not anti. they're 47mm 90a round profile urethane wheels for rolling on the masterblade frames.
The music is so annoying.
silly music... cant hear anything he says
theyre anti's - no core
F&#% that loud ash “cool” music. ;-)
Hahaha. I feel you.. ;)
Very annoying music.
WTF is with the annoying music bro
Is there any skate with 125mm 4 wheel?
Is there any skate with 125mm 4 wheel?
Is there any skate with 125mm 4 wheel?