Jenkem really is pretty rad. If there was a Little Brother to the infamous Big Brother, you'd be it. IDK if anyone is old enough to remember that but believe me it's the ultimate compliment. "Even your mom likes Quickies!" (Bearings) Legendary AD
In this era I think it's even more difficult to create a platform like this cause all of the censorship and political correctness. And all the platforms supporting bs channels instead of the creative ones .
the white coat made me think he knew what he was doing, but by the time he was shoving a mechanical pencil into it and taping it together, I started to have doubts
To my knowledge the urethane is to be baked @ 200° for half an hour ( I'm more certain about the temperature than about the timespan they are supposed to be baked in the special oven)
*uses favorite skateboard wheel for DIY mold. (Knocking at door) “Congratulations George Powell has sent me here to put you on the bones brigade!?” -guy in fancy suit. Me a kinda burnt out 33 year old skater dad with dreams: “ REALLY!? it’s about time they seen my sponsor me tape!” Process server: “no not really, but he is suing you!”
So I did this awhile back with a little more care and actually made a skate-able wheel. check it out -> th-cam.com/video/mz4T7l2CHsg/w-d-xo.html and since then I have perfected the process and made multiple sets of wheels and stated making a how to video -> th-cam.com/video/kFz1ug8JcYc/w-d-xo.html
Dear Scientists at Jenkem Labs, I've been saving a lot of empty beer cans in my backyward, and I'm thinking of making a primitive furnace and forging some aluminium trucks. Have you experimented with this process before? Do you have any advice for forging my own trucks?
jenkem the place where you get el toro wrong. I left a comment on jenkem's website and immediately started receiving spam e-mails. Thanks for selling my e-mail, jenkem.
How the fast skaters do it ..... virgin olive oil GOAT. Next week on Jenkem labs how to replicate Scott Bournes blk out tatts with a nikko and a safety pin ...warning may send you to France to quit skating and become a poet and get into subversive art..
Skateboarder Attempts To Make Gourmet Skate Wheels | Gourmet Makes | Bon Appétit
This video is a disaster and I love it
This is what I expect out of every skater channel
It’s Always Sunny in the Jenkem labs
Jenkem really is pretty rad. If there was a Little Brother to the infamous Big Brother, you'd be it. IDK if anyone is old enough to remember that but believe me it's the ultimate compliment.
"Even your mom likes Quickies!" (Bearings) Legendary AD
WolfWould the good Ol days
In this era I think it's even more difficult to create a platform like this cause all of the censorship and political correctness. And all the platforms supporting bs channels instead of the creative ones .
I dont know if old enough is the term but i do get what you’re sayin, its also skate history as thats where a lot of bad ass shit originated from
i have a big ass bundle of big brother mags..the newer shit.
It's crazy how this is how all wheels are made
next time do a Aluminum deck, urethane trucks & maple wheels..
first of its kind
the white coat made me think he knew what he was doing, but by the time he was shoving a mechanical pencil into it and taping it together, I started to have doubts
That looks wheel bad.
...like, WHEELIE WHEELIE BAD!
Hahahahhahaha ur the best bud
Maybe they will still work for a willy grind...too bad i think they r willy hard
To my knowledge the urethane is to be baked @ 200° for half an hour ( I'm more certain about the temperature than about the timespan they are supposed to be baked in the special oven)
Nah epoxy urethanes cure at room temp via exothermic reactions.
do they flat spot?
I am purely interested in, what really is in those bottles and where do You find substances to make such liquids in nature.
perfect. how do I place an order?
*uses favorite skateboard wheel for DIY mold.
(Knocking at door)
“Congratulations George Powell has sent me here to put you on the bones brigade!?” -guy in fancy suit.
Me a kinda burnt out 33 year old skater dad with dreams: “ REALLY!? it’s about time they seen my sponsor me tape!”
Process server: “no not really, but he is suing you!”
Jenkem Labs?
That doesn't sound sketchy whatsoever.
What kinds of resin did you use? I want to make some but can't find any info on the kinds of resin used
Ali sells wheels for 50 cents but you got to buy 100 or 200 pcs
What did you spend on urathane?
Loved every second of this segment
WHAT SONG IS THIS
Mmm land of chocolate🤤 😂😂
I could make a better wheel from a dry piece of poo
vheck56 sounds more like making Jenkem to me
Try it
*Spitfire wants to know your location*
That's the same shit quality like spitfire
@@robolinoschmidt8676 😆
So I did this awhile back with a little more care and actually made a skate-able wheel. check it out -> th-cam.com/video/mz4T7l2CHsg/w-d-xo.html
and since then I have perfected the process and made multiple sets of wheels and stated making a how to video -> th-cam.com/video/kFz1ug8JcYc/w-d-xo.html
"I try to make it science but not too science for all the Dummies out there"😢😢
Dude this hurt so bad.
"what do you mean the safety glasses have to be on my eyes?"
Are you selling these?
Dear Scientists at Jenkem Labs,
I've been saving a lot of empty beer cans in my backyward, and I'm thinking of making a primitive furnace and forging some aluminium trucks. Have you experimented with this process before? Do you have any advice for forging my own trucks?
gblaneyful learn how to make a sand cast mold. Probly need to be a two part mold. Honestly dont even waste your time cuz aluminium does not grind well
best show in skateboarding
Ah, yes, nihilism at its finest: Set your expectations low enough and even a failure can be called a success.
I've wanted to make wheels alot lately, this is awesome !
Where can I buy one
Nora would love those
Jenkem craft wheels $100 each (include a sticker)
This was amazing, MORE MORE MORE! :D
is it really that easy.
Try to make bushings
That mould was so jacked. Should have used sculpting clay to form each half of it.
More jenkem labs please
That looks like an actual jenkem wheel. Make a box!
Keep em coming!
WIN
now I really wanna see how they’re made
Cheddar th-cam.com/video/U64j80P-Vl0/w-d-xo.html Happy birthday
I like you guys more than thrasher officialy
Let me get some jenkem and 3 wheels please.
Fuck the baby steps, I want to see a homemade complete
Dude this is hilarious!
this was so good
This dude is too funny. I also wanted to hate this video, but you can't.
Thought jenkem was a myth
i think you did a great job!
I may have contracted type 2 AIDS from this video
The idea was there, but the execution...ya got heart though!
Loved it
Wow, splitfire!! 😂
Wheat bread doesn't need any new ideas Jenkem. Quit blowin up the hustle
Wheatberry's potato wheels were way better than this monstrosity.
Hardware in the microwave next?
the Walter white of skateboarding
Nice wheels. You wanna sponsor me? I'll ride & rep those.
came out perfect. i want to buy very much
That wheel was straight fucked up hahahah
Ever noticed how he resembles farris bueller
Try again in another vid this was sick!
I hope this dude isn't a chemistry student or anything. Or even a high school graduate
now please use a potato as a wheel
Everything about that technique was so wrong hahahaha
Being a mould maker for over 10 years, this was hard to watch.
Being an amateur mould maker for approximately a year and a half, I agree.
MrNickatron It wasnt by an expert but a dirtbag skater. What did you expect lol
Good job
B for blue
Jenkem so fuckin sick
trucks next
Vine por un poco de todo jjjja
Wheely good episode.
jenkem the place where you get el toro wrong. I left a comment on jenkem's website and immediately started receiving spam e-mails. Thanks for selling my e-mail, jenkem.
bro the color of the wheel is actually dope if you guys can do a collab with spitfire in that color/material that would be FIRE
Your using a "cold-pour" polyurethane...skatewheels are not that
you should have asked Wheatberry how to make wheels
Here before this video blows up.
We did it
success!!!
As someone whos into casting controller buttons, this hurt to watch
awesome!
that was great
How the fast skaters do it ..... virgin olive oil GOAT. Next week on Jenkem labs how to replicate Scott Bournes blk out tatts with a nikko and a safety pin ...warning may send you to France to quit skating and become a poet and get into subversive art..
will putting oil on your wheels really make it faster, or just more slick?
JENKEM isn’t core anymore cause this bozzo ripped it out!
Cool guy
should have used a potato!
Make that wheel out of a potato
Fucking success
lol
not a bad try
make your own trucks
Bro, im trying to show my children and you are cursing🤬.
No you did not and No it was not!!
Jajajajaj que risas me di con este tutorial
this shit funny
Bruh
Hahahaha
haha, fun fun =]
Umm.. Dope wheel bro.. 😒
Bill wiese.
Don't use satans language.
Cant be worth the time