If That Left Hand Hydro Pump Doesn't The Same Amount Of Power As The Right You Might Want To Wash The Grease Off The Mower & Keep An Eye Out For Oil Leak On The Hydro Pump (s )
You Know You Are Wasting Grease On That Spindle !! Your Just Filling The Centre Of The Spindle , No Grease Will Ever Get Into The Bearings, Because They Are Sealed Bearings.. Also Using A Bit Of Never Seize On The Spindle Bolts Is Good Practice Because After The Deck Gets Wet A Few Times The Bolts Will Rust In The Spindle Housing
Hey folks a lot of the spindles have been taken apart and inside brg cover removed to take grease, best ask owner
If That Left Hand Hydro Pump Doesn't The Same Amount Of Power As The Right You Might Want To Wash The Grease Off The Mower & Keep An Eye Out For Oil Leak On The Hydro Pump (s )
It’s a 109 and 25%
It’s just terrible to work in shop to day
You Know You Are Wasting Grease On That Spindle !! Your Just Filling The Centre Of The Spindle , No Grease Will Ever Get Into The Bearings, Because They Are Sealed Bearings.. Also Using A Bit Of Never Seize On The Spindle Bolts Is Good Practice Because After The Deck Gets Wet A Few Times The Bolts Will Rust In The Spindle Housing
A lot of them have been taken apart and inside covers removed to take grease, best to ask owner of it
I've watched Part 1 and part 2Seems to be glass cleaner Can you clean more than just glass.
It's the go-to cleaner, lol. Safe on pretty much anything since it's typical just soapy water in a can lol
Don't do no good to grease that. It's a seal bearing.