ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Trying to Fix FAULTY Electronics for PROFIT | Profit or Loss S1:E38
ฝัง
- เผยแพร่เมื่อ 10 พ.ย. 2023
- Huge thankyou to PCBWay to sponsoring today's video - Sign up here ▶ www.pcbway.com/ PCBWay produce reliable PCBs for customers with demanding needs. Get your quote in seconds, PCBs shipped in as fast as 1 day.
Ali Express Equipment and Tools (Affiliate)
💡 Flux - s.click.aliexp...
💡 Xbox Removal Tool - s.click.aliexp...
💡 Soldering Iron (Updated) - s.click.aliexp...
💡 Hot Air Station (Atten 862D) - s.click.aliexp...
💡 Amaoe Chip Holder - s.click.aliexp...
💡 Tweezers - s.click.aliexp...
💡 Xbox HDMI Ports - s.click.aliexp...
💡 TDP158 XboxRetimer IC - s.click.aliexp...
💡 Nintendo Switch IC's - s.click.aliexp...
💡 Nintendo Switch Ports - s.click.aliexp...
Amazon Equipment and Tools (Affiliate)
www.amazon.co....
You can buy my Microscope here ▶ andonstarmicro...
My eBay Online Store ▶ www.ebay.co.uk...
📞 Discord - / discord
📺 Twitch - / joeydoestechofficial
📷 Instagram - / joeydoestech
🙋♂️ Twitter - / joeydoestech
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech.
Normally you would give up when you saw all that Liquid Metal. The will to not give up is exceptional and I’m so happy that you didn’t just give up and push on.
Pro tip Joey: On things like the Switch CPU just use solder balls. With paste theres a very good chance you're going to end up with some balls uneven but with balls they're guaranteed to be the same size. The stencil sticking is normal. Just heat up a little before pulling it off. It's best to pull it off while it's hot.
Also the cpu getting hot isn't likely a bridge otherwise it would've happened on both sides of the port. It's more likely a bad charging port.
Thanks for the tips and info as always mate ❤
Try putting the solder paste on some paper towel to take out some of the moisture, and then pack the stencil with the dryer paste.Also to get it to remove after melting the solder paste put a couple drops of flux to help it release. Good Luck!
Fun fact, those "found in the wild" restoration videos are all fake.
Actually there's one channel where this guy goes through his local dump and finds electronics and cleans them up. I can't remember the name of his channel because I'm not subscribed to him All I know is that when I'm asleep it auto plays his videos
They need to improve there weathering techniques, plastics don’t rust, it’s not a uniform colour and rust doesn’t come off with a bucket of water 😂
@@Mrflash222006 they need to just not be liars
Was your cat purring whilst being with you? I love seeing cats (and pets in general) being featured in videos, makes for more cuteness!
Another win! Really nice. Sally is getting happier again.
It's about time! Long may it continue :)
Well done Joey. I am rooting for you.
Such a GREAT video!! Thanks for the content Joey!
You're more than welcome! Thanks for watching :)
I am very thankful for you. I have been curious about doing things with re-balling and I knew that I didn’t have the skills to do it so I haven’t bought anything to try and start doing that yet. For as much as you have not had much success in re-balling, you have shown me some things as well as others that it’s not easy. Thank you so much for giving it a shot and for letting us watch!
What you need is a 15"x15"x11" approx ultrasonic machine, use distilled water and a decent electronics cleaner solution will make life a whole lot easier. Or find a used machine and transfer the workings to something like an enamel metal oven dish and add some horns to get max coverage. I have heard people converting old deep fat fryers keeping the heating element to warm the water and just affixing horns to the base and wiring it up.
Hey joey try a "higher grit" of solder paste i hear that it makes it easier. Also i think that you had the order of your steps wrong. If im correct it goes.
1put stencil down onto chip and line it up
2apply solder paste
3remove stencil
4apply heat
I hit my stencils with 450c, I find it melts the paste quickly before the stencil starts to warp.
I knew you could do it! I also knew you should have reflowed the chip instead of reballing it.
That kitty is beautiful :)
I always loved cats but until a few years ago, I never had the chance to get one.
Congrats Joey! Finally broke the streak! And hey, maybe you can get some reballing practice on one of the non-repairables or find something cheap to practice on?
Nice to Sally turn green for a change.
Nice job on the ps5! Also your kitty is adorable!
You did well on that Switch lite. I could present that same problems on the buyer's hands and that would de terrible
I did apu reballs just like in your video, i used the stencil as a guide flux and tweezers with hot air to reflow the balls. Until i discovered a cheap bga rework station of ali Express, profiles included, I'd never go back to hand reballing as it's 50/50 success rate. 😢
Curious what the model of BGA rework station is? thanks
Yeah i would also like to know the model, mine recently crapped out on me and im hunting for a replacement
i love this series
I started having flashbacks of a switch lite... glad you gave it a shot
Great video… Good repair….
You need a direct heat stencil if you're going to heat the stencil itself.
Hence the bending when heated, that one there is just for applying the balls
hey wana ask i got a ps4 slim the console don't power on but if i press the eject button it beeps 3 or 4 times i did check with a disk but wont power on
Great cat!
Hell yeah! You were due for some good luck.
@joeydoestech do you have “do it nice or It twice” shirts with electronic theme on it as merch? I definitely learned it the hard way today. I want one 😅
Nice Video Man. i will be honest your Soldering Work looks better than factory.
Awwwww! What a beautiful cat
Fixed that Switch until it was broken. I am sure you can get it running again and add it to the green
Stencil you used is not direct heat, solder paste too "wet" also...proper direct heat stencil shoul be smaller, with size reduced to cpu size, that will prevent stencil from bending.
Are you looking forward to the "Cyst" aka nickname for the upcoming PS5 Slim? What a nickname, I says to me daughter ppl can't call it that but the mud seems to be sticking out there in internetland lol
yes yes Joey.. i have my fingers crossed today is all profit
I had that same issue with a switch if I remember it's something to do with ram on the board
I generally wouldn't say this to another guy, but; you have a beautiful cat. Thank you for the video. Cheers from So.CA.USA 3rd House on the right.
Please tell me you noticed the hole on the case at 13:27 and on the power supply at 13:33!
Nice job with the PS5 and a shame the Switch Lite couldn't be fixed this time. Also, your cat is beautiful 😄
So what you're saying is, that re-baller stencil thing or whatever it's called, needs to be made of a material that is NOT metallic ... so it doesn't attach itself to the board while you work with it... like a ceramic or something? Ceramic is an insulator so it'd only get hot where the holes are for the pins or whatever they're called. Oh hey should I trademark the idea? J/K Also, hello from Montana, USA
That cat is unit
The way you push your finger the cpu and then works was amazing Joey haha, forget the cpu issues !
PD: YEEEES! More profit, time to push!
Dry the paste plus does stancil are just rebold not to apply paste and removed stancil then apply heat thats why you need dry paste
Hmm, looks like we're finally heading in the right direction. But given your expenditures, and also other things like postage costs (remember there is an eBay fee included on the postage price) and packaging materials, realistically you're going to need to be +£1200 to +£1500 before you actually have £1000 of net profit for yourself.
Anyways, good luck, and hopefully with the reballing/reflowing equipment you might even be able to revisit some older Nintendo Switches that have APU/CPU issues.
I always thought the stencil was removed after applying the paste and then heated. Seems I was wrong :)
Thank god
Joey, something I've always wondered - what is the Wick for? What does it do? What's its purpose?
You use wick to draw up solder from components/boards. It's like a sponge for solder.
Lie it down on the board where there is solder you want to get rid of then heat it with an iron and it will pull all the solder off the board into the wick.
I opened a psu a while ago and was careful but still got shocked. It was the power supply of my Chinese soldering machine xD luckily I used my right hand and the electricity didnt kill me :)
I clicked like before watching it :D
when switch reball live?
At this point just buy something you've never bought before
You ever think about sending them back into Microsoft to get fixed
He looks like Bürger Lars Dietrich😅
First Comment! Such a cute Cat! :)
Joey pleaso do not use solder paste for bga´s that big. use it for small bga´s when u don´t own a stencil for them... u won´t get the balls evenly flat/big with the paste... its alway better to use the right solder balls...
The PS5 wasn’t working due to bloody FIFA again
It has Fifa 22 AND Fifa 23? Sheesh good thing Phil didn't get it
Hi
Trying. To. Fix. Faulty. Electronics. For. Profit. Profit. Or. Loss. S1E38
There's a lot of Gamer Juice on that one. Gross
Tbh your gloves are disgusting lol do like your videos tho
Because He's a hard worker :)
Hi