Carburetor Replacement: Honda GX Series Engines

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ม.ค. 2025

ความคิดเห็น • 39

  • @Dmpddiver
    @Dmpddiver 3 ปีที่แล้ว +9

    This was a perfect video for me. I was going to rebuild my carb but after watching this and the price of a new carb was less than 20 dollars it was a no brainer.

    • @irish89055
      @irish89055 9 หลายเดือนก่อน

      Yeah, good video. I bought one of those cheap Chinese replacement carburetors too. I need to get on it and see if it works

  • @sprytnaexteriorcleaning6163
    @sprytnaexteriorcleaning6163 5 หลายเดือนก่อน

    Excellent Tutorial! I used this video to change the carburetor on my Honda GX390 for my 4 gpm pressure washer. I did exactly what it shows and now I am happy to report that my engine runs perfectly!! 8/17/2024│ I bought my Carburetor Kit on Amazon for less than $15...it included the gaskets, an air filter and spark. (not to mention...a bunch of other parts like a turn on/off switch, gas line filter and gas tube with clamp.) Thanks so much for making such a great tutorial!! I subscribed and gave a thumbs up on my computer and phone.

  • @Angelcaroch
    @Angelcaroch 3 ปีที่แล้ว +1

    Thank you. My supervisor told me to replace the carburetor. It was easy once I watched your video.

  • @KyleHamilton79
    @KyleHamilton79 3 ปีที่แล้ว +1

    Thanks! I have this engine on my power sprayer for pest control and it hasn't run right in a long time. I didn't realize it was this easy to change so I'm going to be replacing it in the morning and do a good tune-up. Thanks for the great short video. It's nice and to the point, which helps me a lot!

  • @amathonn
    @amathonn 2 ปีที่แล้ว +2

    Choke lever protrusion can be used to temporarily stop up gas line. Great video, very thorough!

  • @scottdinsdale8014
    @scottdinsdale8014 4 ปีที่แล้ว +5

    Hey mate ... thanks so much for this instructive video ... I am not a mech guy at all but just changed the carb on our river pump (that keeps our place in Australia alive) ... your instructions were super clear and made what would have been an intimidating task a piece of cake. Thanks again mate ... keep it up!!

  • @michaelc7283
    @michaelc7283 4 ปีที่แล้ว +2

    Hi,
    Just wanted to say "Thank you" for this video. My anti anti chatter spring was broken at the section were it get hooked on the carburetor. Didn't know what this spring was called.
    Again, thanks for explaining and describing all the parts. Very helpful.

  • @harveyrousejr.2069
    @harveyrousejr.2069 4 ปีที่แล้ว +10

    Joel; The choke lever on the Honda engines has a plug on the rear the serves as a temporary plug for the gas line.

    • @SuperBoneidol
      @SuperBoneidol 3 ปีที่แล้ว

      Really? I didn’t know that

    • @joef.3094
      @joef.3094 2 ปีที่แล้ว

      super cool, thank you !

  • @nicholashalvis5376
    @nicholashalvis5376 ปีที่แล้ว

    Great video. Your explanation of how to replace the carburetor was very simple to understand. Thanks.

  • @blazingturtle5888
    @blazingturtle5888 3 ปีที่แล้ว

    Nicely done. Bought the new carb, and easily replaced it with my son. Generator started...... 1st pull !!

  • @TheAlabamaTraveler
    @TheAlabamaTraveler 6 หลายเดือนก่อน

    Excellent video with steps and views!

  • @nataliedufour8034
    @nataliedufour8034 4 ปีที่แล้ว +1

    What a lovely video. It’s quite informational if I would ever want to change a carburetor; however, I don’t. I hold cleanliness in the highest regard, especially when it comes to my loft... :)

  • @colinpoole7653
    @colinpoole7653 3 ปีที่แล้ว +1

    Great vides. Gave me the confidence to tackle my gx160. Still haven’t worked out how you did the old carb to new carb trick though😃

  • @Ikariel
    @Ikariel 5 หลายเดือนก่อน

    thank you so much Joel !

  • @richardjohnson3024
    @richardjohnson3024 2 ปีที่แล้ว

    Nice..that looks simple..I'm going to do it now..I'm sure I could do it without the vidio..but it's always a good idea to familiarize yourself with all actions you will be taking..by watching a short vidio..these carburetors are dirt cheap on ebay or amazon..from $15 to $40 depending on extras that come with it..airfilter..sparkplug..plug wire..pull start set up..gaskets ect ect..great vidio

  • @richr5971
    @richr5971 8 หลายเดือนก่อน

    Great video. Thanks for posting.

  • @irish89055
    @irish89055 7 หลายเดือนก่อน

    Thanks for the video.I did something wrong on hooking up the spring... when I push the choke closed it races like crazy.. I bought a cheap Chinese carburetor to replace the one that was on there,it doesn't have that little side sediment bowl . I was told it's not needed.. my motor is for a pressure washer

  • @lindmichelfoto
    @lindmichelfoto 3 ปีที่แล้ว +1

    Thanks for the video, very helpful. I have a generator with a Honda GX390 engine. It's 13 years old and I just had to clean the carb to get it to run after a recent hurricane. There's a slight leak in one of the gaskets & I think I'm just going to replace everything, carb/gaskets. Just curious, the 2 carb stud bolts are threaded on each end. Is there a trick to getting those bolts out?

  • @machfrk
    @machfrk 3 ปีที่แล้ว

    Thank you for the info. Discovered I installed my gasket behind the carb upside down. Would not run without choke.

  • @وساموسامعلي-ظ9و
    @وساموسامعلي-ظ9و หลายเดือนก่อน

    كيف تحل مشكله استهلاك المكربن للبنزين انا قمت بتركيب مكربن جديد لاكنه يستهلك الكثير من البنزين

  • @GDTractor
    @GDTractor 3 ปีที่แล้ว

    Nice video and very helpul. How did you know which ones of the wires fit on the starter. I have a green wire that isn't hooked up but I cant short the positive on the starter solenoid across and it will start .. but don't know which wire needs to be hooked up to starter so I can use the key. any thoughts on this .. I would appreciate your help. thanks much.. GD Tractor

  • @RepairingShow
    @RepairingShow 3 ปีที่แล้ว

    Excellent work

  • @bigbosssauce7
    @bigbosssauce7 4 ปีที่แล้ว +1

    Good stuff Joel thank you.

  • @Smokey613
    @Smokey613 8 หลายเดือนก่อน

    Are the carburetors interchangeable on all the gx series engines?

  • @marybright3304
    @marybright3304 2 ปีที่แล้ว

    I didn't see how you attached the fuel line. I am having a heck of a time making that little turn at the end. When do I attach the fuel line?

  • @harley092355
    @harley092355 4 ปีที่แล้ว +1

    Great explanation 👏

  • @stephenhopkins9541
    @stephenhopkins9541 4 ปีที่แล้ว

    Well done. Great information.

  • @winnipegperfectcircleflyin7859
    @winnipegperfectcircleflyin7859 2 ปีที่แล้ว

    my snowblower had a plug in the breather tube! why?? because its a snowblower???

  • @revolution3797
    @revolution3797 4 ปีที่แล้ว

    Are these the same carburetors that you could put on the gx120 four horsepower? It looks exactly the same.

  • @arthurromanillos1743
    @arthurromanillos1743 3 ปีที่แล้ว

    Any formula to adjust gas and air

  • @odenzen2714
    @odenzen2714 2 ปีที่แล้ว

    Thank you!!!

  • @meowmeowmeow1243
    @meowmeowmeow1243 4 ปีที่แล้ว +2

    "be sure to lose this later" - i almost always do :))

  • @Tolbertkennel
    @Tolbertkennel 2 ปีที่แล้ว

    Hey, the phone is ringing.

  • @bl9531
    @bl9531 ปีที่แล้ว

    Easy peasey