The Fastest I've EVER Blown Up an Engine... HOW!?!? + Corn Cob Gets a Late Model MOPAR Race Engine!!
ฝัง
- เผยแพร่เมื่อ 18 พ.ค. 2024
- We're HUSTLIN to get these cars done for Bristol!!! Chad's mustang had different plans...
Hope you guys are stoked about the Donnie 2.0 Giveaway! Check out these links to get entered!
Here’s how to enter: During the Promotion Period, eligible entrants will automatically receive one (1) entry for every $5 spent on any of the following:
- In-person admission tickets PURCHASED AT www.bristolmotorspeedway.com/... for Cleetus & Cars on September 3, 2022, and/or The Bristol 1000 on September 4, 2022 at the Bristol Motor Speedway (collectively the “Event”);*
- The livestream pay per view for Cleetus & Cars / The Bristol 1000 purchased at
www.cleetusmcfarland.com/page...
- Cleeter Crew one-year subscription purchased at www.cleetusmcfarland.com/page...
Existing Cleeter Crew subscribers will automatically receive 20 entries.
*IMPORTANT: Your purchase for in-person tickets to the Event must be made through
www.bristolmotorspeedway.com/.... Purchases made through any other website or at the Bristol Motor Speedway ticket booth will NOT earn entries.
Hope you guys are ready for an EPIC time in Bristol! September 3-4, 2022 BRISTOL In-person tickets www.bristolmotorspeedway.com/...
Get tickets to Klutch Kickers here!!! tickets.thefoat.com/FreedomFa...
September 3-4, 2022 BRISTOL Driver registration Cleetus & Cars tickets.thefoat.com/FreedomFa...
Our 2022 Sponsors:
www.holley.com
texas-speed.com
www.motionraceworks.com
www.nittotire.com
www.summitracing.com
heatwavevisual.com
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1 - ภาพยนตร์และแอนิเมชัน
![Supernova - aespa エスパ 에스파 [Music Bank] | KBS WORLD TV 240517](http://i.ytimg.com/vi/bepqfR-pxY0/mqdefault.jpg)
Tune in this weekend boys, get your PPV now for $5 less at www.cleetusmcfarland.com/ It's going to be INSANE!!!
what cars will be at ls fest in ky
Will be watching from Omaha
Cant weld wood lol
Gah dang I have a yard fullll of Mopar motors lol what else do you need we have those V8 blocks all over 318’s for days !
Is whistling DOUCHER racing? I will never put a cent of my hard earned money to anything even remotely involved with that ass hat.
Much like Demo ranch when he shot all the guns, I want to see cleeter run every vehicle in the fleet down the quarter mile. It would be entertaining and I’ve been curious what some of them could do.
Straight Cut Gears - Even the tank???
That would require more than a hand full of them to be running at the same time
@@54racemantrue enough, but they could get em running over the winter and early spring just do a hot lap with every car as a warm-up for racing season
This is a great idea for a short series if he can’t fit it into one video.
George’s “ feels more like an intervention “ comment was a lot funnier than it got credit for!?!🙏👍🏻🤣😂
It needs a damn roll hoop asap
George could do great stand up.
George ur late again intervention
How loud these motors are I doubt they hear anything particularly well 😅
I thought so too 😃😂😆😂
I’m so glad Sam is more comfortable being in videos cause he has so much wisdom to bestow, and some very clever things to say.
Cleetus: "What can you NOT weld?"
Ty: "Wood"
🤣🤣🤣🤣
use a "stick" welder
Hope that crack in the weld doesn’t come back to haunt them. Cast is a baitch to weld.
Sign that he's been asked that before
Ok hear me out caulking and glue
Man when you asked -
"Would you hit the burnout pad with Neighbor or Toast ?"
I instantly said Neighbor, because that vehicle just hits home with me, being around since sub 100k subscribers and knowing that cars backstory in and out, that car is as just as sentimental and important to this channel as Leroy in my opinion.!
you just made me realise how long ive been watching
@@Veikra right? Remember when Mullet was going to be a jet car?
I so agree. Neighbor, Ruby tha Dale truck,, they're the Cleetus McFarland hotrods for sure. LeRoy is FAST, he's unique, well, he WAS when Cleetus first brought him out BUT there's quite a few 'copies' out there now BUT he's not the Cleetus image Neighbor and Ruby are. Used to be we seldom saw a car making a pass without all the body work on 'em,, then the racing community met LeRoy and the racing scene changed. S'ok, LeRoy will be back out there soon, break'n hearts and making grown men cry all the while setting NEW RECORDS in the process.
I said Neighbor because having never driven anything with more than 400 horsepower (let alone 1,000!) I feel like Toast might be too much for me to handle right away.
My instant reaction was neighbor 😂
I think it’s Safe to say it wasn’t a Mystery that I was gonna Rip that amazing unit with all I had 😂🤣
You are the burnout Machine!
Ya bent it twice... Not that Cleeter would ever do something like that, then there's George...
Brent didn’t you recall saying you were gonna get the mystery machine back and up hahah or i may heard !!! Can’t wait either or for the tip rip! of this
Only one (PFI) speed... Brent= full tilt boogie!!! : )
As a welder I don't know how that engine mount is going to work out, you can't really weld cast iron without alot of prep, mostly preheat and letting it cool very slowly along with using the right filler and slowly welding and using a needle scaler to help prevent stress as it's welded. I was watching on the big screen and could already see the crack developing in the weld. I usually don't like being the negative one here but please keep an eye on that mount.
Looked like there was already a crack in the fresh weld too, which isn't uncommon when welding steel to cast iron without proper prep... Hell, even with proper prep. That's why I prefer to braze if it's not cast to cast, but the vibration could be an issue.
I feel for Tye welding the motor mounts on. Back many years ago, I worked in a shop and we got cast iron knitting heads from a textile mill come periodically that had cracked and started leaking oil. Old guy that I apprenticed under had finally came up with a system to weld them. After extensive cleaning and prepping, we would build a temp furnace out of fire brick, get the head in there, ( it weighed about 350#) slide a burner in through a slot and heat the head slowly until it was dull cherry red. Turn the flame off, open the furnace, slide it out, and braze it with acetylene torch and brass rod. Finish up brazing as fast as possible, and then slide it back in the furnace and close it up to cool off slowly. Worked great. He tried everything before to weld them, nickel rod with pre heating, tig with different alloy rods, etc. Nothing worked except the furnace deal. Some of the hottest days I ever had putting your head inside that head and brazing it.
Sounds like a solid way to do it, shame they can't really do that with that engine block though with what they're trying to accomplish
I had to preheat a head off an old water cooled flathead to weld a crack in a cooling jacket. the amount of gas I used to preheat was astronomical 🤣
You saw that crack too?
@@udlman1 Yep...
I just want to say it’s good to see Cleet wearing ears with all these ridiculously loud cars now. Keep some of that hearing good for his new spawn
Huh 🤔 jk but yeah it's def good to see. I'm 31 and have mad hearing loss. It's seriously sad sometimes.
@@riffle91ar seriously my wife hates it but I never thought when I was younger that it would matter…..now I’m 32 and have a constant ringing and it hard to hear anything lower than 50dB
@@BobbyB910 yeah man it seriously sucks. I'm the same way. Not constant ringing but if things get even remotely quiet mine start ringing.
I’m so happy Sam is always there and part of the team!
99s!?! That’s an eighth of an inch!
They need him for the oldschool stuff...
What was the first video with him?
I've been around since the whistling duck sound blow off valve days or what ever that was before Ed the Neighbour and everything, Sam is such a great asset for the channel and just seems like a genuinely nice fella and it's great to see him still working with his knowledge and a part of a much younger crew
Hell yeah brother, rip Ed
Actually, “do it for Ed”
Ive never seen the Dale truck look as good as it did pulling out of the shop. I literally said "damn"" out loud
If it ain’t the crank sensor the whole dang engine goes. The luck Cleet has been having lately man, good call on letting Sam and Sam only mess with the Carb on the new block. 😆
Im starting to realise, the knowledge to be able to tune a carb is getting rare! Now i just need someone that wants to run carbs!
@Erikk Hyndman it seems funny, because just a few years ago the cat community would scoff at fuel injection. Now we have people who don’t know how you tune a carb. Lol!
I agree!
Just an idea, let Derek from VGG tune that carb at Bristol. He can do it by ear and barely needs a vacuum gauge. 👍
After this many engine failures, it’s not down to luck.
I love the longer videos like this. 11 mins just isn't enough
I busted out laughing when he couldn't stop in the mystery machine 🤣 😂
Definitely a Bundy moment..💥...Kids your fathers home
I love that Corn Cob is getting attention as if she's your, everyone is super involved and seems excited to see her all done. That's exactly what I'd want from a mechanic
Who owns it? I haven't watched much recently.
@@tannershanksftw Roman Atwood
Kudos to Cleetus for wearing hearing protection!
Tinnitus NEVER GOES AWAY and will leave negative effects on your life.
Young people -WEAR YOUR EAR PRO & preserve your health
Yep finally was relieved to see him have something covering the ear flaps
What?
Come again?
I'm 28 and have it from car stuff, motorcycle riding from the wind, shooting guns and playing in a band with no ear pro. It's not super super bad but it definetly makes it hard to sit in a quiet room
From a guy who makes a living with my ears I second that opinion!!!
So many freedom filled activities going on. Guitar playing the SSB. LS's scattering. Late model Mopar engines. Dale trucks firing up. Just FREEDOM OVERLOAD!!!!
'Murica! 👍
And a 2000s corvette in the giveaway! MURICA!!!!!
Petition to put the front clip back on Toast! Sign below! That car is (was) too beautiful to end up looking like Leroy (no hate on Leroy or his look) and that generation of Camaro was always my favorite.
Vargas brothers look happy every time their engines start after all the abuse.
Beating those stereotypes
Alright boys, time to get Steve “Dulcheck” together with Sam and let them have at that old mopar
U damn right
“What? How?”
“I don’t know, I just FLOORED it and the hose blew on it” 🤣
I'd go for Toast on the pad. There's something special about looking out the windshield and seeing a big damn blower with a giant hat. I _do_ love a good Vic, though.
Sam needs to be on a "Dr. Carb'em all" t shirt
Cleetus is always breaking records whether its at the strip or blowing motors 😂
True. Kyle is up there as well.
@@flyingmunk8956 One of Cleeters blown up TS motors pays for everything Kyle's ever blown up I'll bet.
Pretty Much lol Great Crew 💥❤️🤍💙😅🤣👍✌️
@@flyingmunk8956 but Kyle's more the type to not be trying to avoid it. Whereas these guys shouldn't expect not to...
🫡
As a Mopar guy from way back the X heads are 340X heads, these were OEM for the 340 6 pack. The later X heads were from 360's probably the same ports, but had 1.90/1.60 valves, over the OG 2.02/1.60
Wow that engine is a sweet find! Amazing block and heads , very strong and lots of potential .. can be bored out pretty large dodge used them in IROC, drag racing and NASCAR. The x block is a small block mopar wet dream
Man...I don't think I have ever seen Sam without his ear-to-ear bright smile. That gentleman is having the best retirement he could have ever had
Sam is such a hard working guy. It's great seeing him in your videos.
I’ve never seen him work on any video?
@@scotty197878 you haven’t watched his videos than
@@Ridinglawnmower145 NO KIDDING, A HELL OF A LOT OF WORK TO MAKE THOSE VEHICLES LOOK SO GREAT.
Tye’s comment about welding wood has me dying 😂
Even funnier was the big crack right down the middle of the weld he just did lol
in finland we say a good welder can weld a slimy catfish to a wet rock with a fish stick.
Shoutout the Vargas bros. They have the rotary game on lock like no one else.
“You weren’t even thought about yet”
James with the great banter again XD
I’d love to see a calculation of what an average engine failure cost in the McFarland fleet comes to.
1/8th of the revenue from the most recent merch drop
i ve been thinking along those lines as i ve been wondering how much money they spend per month on average?it s a lot,that is for sure.
Business expenses are tax deductible so it all comes out in the wash.
about 400,00 views.
@@theKashConnoisseur That is not how good business works, bud. I wish these dumb ass comments from people who never ran a business would stop. I have been self employed for 30+ years, something being "deductible" doesn't make it a good business decision. If the motor cost 10,000 and you save the taxes on it, say around $3500 for 35% tax bracket, you are still losing $6500. Losing 6500 is not good unless you find a way to make money on it, say with TH-cam views, then and only then does losing $6500 not eventually bankrupt a business.
Keep Sam in on some of the builds. I like his input on things.
I LOVE the induction of mopar into the channel. Makes me happy.
I LMAO every time I see the Mystery Machine do his thing. Something magical about a rotary spinning to the moon.
Thank you for continued content that helps me get through rough moments missing my daughters. It’s truly appreciated Cleetus and crew.
Don't know the story but wishing you the very best man
@@williamstamper442 Thankyou SO much! Just a single dad who’s ex wife who unlawfully using the courts to keep my amazing daughters from any time or communication with , my angels are my life! Lost my mom to brain cancer recently and she wouldn’t even let them come to her funeral. Breaking my heart and more importantly my 3 daughters as well. Was suppose to have them today and the ex jsut ignores my messages to pick them up and becasue of Covid the courts are so behind it’s taking forever to get this taken care of. Hardest couple years of my life but trying to find little bits of life in the darkness. Just wanting to give them the Love and attention of an adoring dad that every other dad gets to show after divorce, missing being 24/7 dad becasue someone knew how to take advantage of the system. Thankyou for your response, that’s a little bit of light and means a lot. Cleetus vidoes help in those hard times honestly, some comedy and vehicle content to keep my mind busy and in a better place emotionally.
@@MZ-bl6wg I am so very sorry. I must be an empath because I felt your pain and can relate.
First of all, you are correct in that this is all WRONG.
Second of all you are a red blooded man if this situation hurts.
Third you are here using automotive entertainment to kind of take the sting off all that has went down.
I've got 3 children 2 different mom's. My daughter is 17 going on 21. She surprise visited me 2 days ago just to say hi. She reminded me how she needs grandpa's 1968 Oldsmobile red convertible for her graduation next year. I just said yeah it will be ready.
My 2 sons...last time I seen them was april 19, 2015 at 9:15pm. I literally have not saw them one time since that date. No I didn't do anything stupid or unlawful. I had legal parenting time with my 2 young sons at the time, while the soon to be ex was prego with somebody else's baby. She didn't answer the phone all day for her "call". At 9pm I'd been playing all day with my 3 kids and my then gf's 2 kids. We did cool fun stuff all day. I cooked dinner for everyone and had to lay down and take a break as I was simply wore out. The ex came with the cops and seen my new gf and freaked and made excuses that I hurt my children. The cops said she should take them. I didn't even have a say so in the whole thing. I fought this for 3 years straight till I was totally and completely out of money. Every single time we went before that f.o.c. "judge" it just got worse. After another 3 years trying I just ran out of resources and breath..
My 2 sons are now 11 and 9 respectively. I don't even know what they look like. The daughters mother got with the 2 sons mother during divorce and made me out to be a terrible person then high 5'd after the hearing. My attorney pulled me out of there.
Those two conspired to get my dollar worth. They didn't get it but I lost my kids. The two mother's were trying to get at my retirement fund. That was something you can't just take from like a bank account but they tried. I kept working and paid $2340 per month as a regular mechanic, while taking home $1240 per month after taxes and all. Did this till I had health problems. First I started going blind. Then it progressed fast and I was diagnosed with MS. Now my 3 children's mother's get a full $844 per month per child and I still pay arrears that I don't owe, almost $1000 per month. Living off of $1048 per month and whatever I can sell from my personal property.
Don't care if people don't believe me, I know people who been dragged thru this system does because this crap exists. That is my empathy part, I know how you feel my friend.
It's not right and never will be. I bet money you live in a liberal blue state or at least a blue city. This is why things are this way.
Again... I wish you the very best my friend. Contact me anytime if it all gets to feel like too much.
I love it when the Vargas brothers come around
Sounds like a serial killer duo lol.
@@AB-80X Kinda looks like one, too.
REMEMBER WHEN NOT EVERY CAR ON THIS CHANNEL WAS AUTOMATIC.
Pepperidge remembers
I love a manual, but if they want to go fast this is the way to go sadly
Loving your content! Everyone as a whole in the shop and in the back ground, keep killing it. You guys are awesome.
Be careful with those mounts, it appears there's a crack running down it. It's damn near impossible to weld steel to cast iron without using nickel rods. It also needs to be stick welded.
I saw that immediately too
Exactly what I was thinking
Exactly right!
Had to pause and shed a tear
Yeah that's a crack.
One day you guys should build a screaming rotary drag car with those guys.
"those guys" that's the MF'in Vargas brothers show some respect , they're not just "those guys"........them and Rob Dahm are the TH-cam rotary guys or well known rotary guys .
@@ScabFarmer yeah I know I watch their videos I was referring to all of them including cleeter jackstand and all the boys.
Number 3 truck is awesome. Craftsman back as the title sponsor for the truck series. West Coast fan that remembers the days at Mesa Marin Speedway when the truck series started. will definitely be watching this weekend at Bristol. BIG...Hell Yeah Brother and Do it for Dale.
Love seeing Toast back in videos! I feel like he doesn't get the love he deserves.
i was surprised that rotary made more torque than horsepower. Almost 400 at that.
Yeah, it made about exactly the same figures as my Volvo T5 does and that is NOT a revvy engine lol. Over 200bhp by 3000rpm, peak power at 5500.
It has an auto trans, the torque converter multiplies it.
Watching this video brings back the memories of going on my first high school camp with your buddies.
Making sure you got everything just right…. Dreams are made of this stuff
I’d go neighbor, because out of the two it seems more user friendly. Plus I already know I’d be taping walls in either and neighbors a little beefier on that end
"that end"... Boy this comment really aged well ...poor neighbor!
I'm way more interested in corn cob than I should be, can't wait to hear that motor fire up!
You didn't win anything it's a scam
Gotta go with Wix filters; the anti-drain valve is fastened to the baseplate so that what happened to you doesn't happen on those filters. K&Ns and Frams don't do that.
Might have missed it but what oil filter were they using?
WIX all the way. 🤘 🤘
@@KM-os4be No idea. They never mentioned it.
If you can't find a Wix branded filter, Napa Golds are rebranded Wix filters.
I bet it was a fram?
Man the mystery machine is amazing. Vargas brothers and their rotary engines. Insane
It would be really cool to see some more old mopar love on this channel. They had a lot of cool trick stuff in the mopar world that never really took off like small block chevys.
Pretty sure George and Rodney still got ya beat with that cold rev rod chucker.
That shit was legendary for real
Between the look on George's face when it blew and the shower of parts
that came rolling out from under the truck, that was definitely in the top 10 of
funniest videos I've ever seen.😂
YOU NEED SOME HEAT IN THE MOTOR
I like how y’all keep teasing Sam about the “NINETY NINES!” 🤣 He’s a good sport.
lmao its just the jet size for the carb.
Love the radiator blast shield
Neighbor been who id go with just the sounds that car makes gets me tiggly inside. Yall are awesome.
that Torqueflite needs that "kickdown" (its actually throttle pressure) if it doesnt have a full manual valvebody in it...its just like the cable on a 700R4...if you dont have the linkage, tie the lever on the
trans back atleast 3/4 to full, it will shift late automatically but it will keep the line pressure high in the trans and it will not burn up.
Definitely need to do this, the torqueflite kickdowns are necessary and can be kind of a hassle to adjust properly
Cleetus is the whistlin diesel of the engine world. We’re onto you. “Oops! Not another engine” 12M views.
You mean click bait?
@@buckberthod5007 buck are you familiar with what click bait actually is?
@@buckberthod5007 I mean he is blowing up the engine it’s not really click bait
@@xcursion6326 That engine wasn't blown. It had a lifter tick. Something super common to high mileage LS Chevy engines. Blown would mean spun bearing, bent rod, deleted pistons. Not lifter tick. Hell I drove my truck 6 months with a completely snapped roller lifter for 3 months almost every day with no problems. Down on power, but still ran just fine. I finally got around to fixing it, changed the oil, and it still runs fine. So yes, it's clickbait.
@@smexypookie1862 That engine wasn't blown. It had a lifter tick. Something super common to high mileage LS Chevy engines. Blown would mean spun bearing, bent rod, deleted pistons. Not lifter tick. Hell I drove my truck 6 months with a completely snapped roller lifter for 3 months almost every day with no problems. Down on power, but still ran just fine. I finally got around to fixing it, changed the oil, and it still runs fine. So yes, it's clickbait.
Love the longer video. The more we get to see the guys work the better.
Many of the older Mopar parts interchange. the distributor cap from a big block will fit on the small block. I did a small block to big block swap on a truck. Only had to make the 2 wire for the distributor longer and bought a set of stock motor mounts.....
That shop is so full of cars in various stages! Freaking awesome!
The offsite Cleetus McFarland Safety Manager says you need a hand rail on your elevated storage shelf @6:52 if you are going to expect employees to work up there. OSHA could issue a citation for such violations.
"we don't need one of those where we're going!!"
Technically when George doesn’t break the forklift no body has to be up there
@@54raceman 100%. I would hate so see one of the guys take a tumble!
Can’t wait for this weekend
I would love to see Cleetus and the guys start up every car at the shop all at once and let of the bald eagles sing to the world.
This was an awesome vid and I feel like we haven't had one this complete in a long time. I know you've been busy and thanks for the hard work.
I for sure didn't give Sam enough credit.
I may be an EFI foetus, but it totally blows my mind he just *knows* what carb jet to use
He's old school... thats the way to go... no computers
Awesome. I would definitely take toast to the burnout pad at Bristol
Love it 15/16 to 7/8th. Nice one James 👍
As a life long mopar guy I'm jacked to see some mopar love and respect.
Yea it was respected so much it made its own respect vent all across that motor mount.. itll get all the respect it wants at the fancy 5 star facility its about to be relocated to, El Yard de la Junk... its borked good...
That is the coolest engine on here to date. I love the Mopars!
When I saw the fram oil filter on it in the previous video, I suspected that being the issue then. I've seen that happen with fram oil filters several times... Awesome videos can't wait to watch bristol this weekend. Do it for Dale!!!
You guys are awesome! I remember when I started watching.. The weeds were growing through the race track! You ans sxs blog are the channels I look forward too!!!!!!
I love Sam dude. His excitement for every job day after day keeps me going
You didn't win anything it's a scam.
@@benpowitzky4820 I’m aware I get these comments on every comment I post lmao. Like how stupid are people?!?!
Sam is a legend! He looks so happy messing with the ole carbs
You didn't win anything it's a scam
I'm rocking the same green stream light at work too! Great minds think alike
That is a stout piece! Wow can't believe you found that!
love the mystery machine, but it does have the most annoying sound, perfect for midnight laps in the gated community
Sounds like a bad ass snowmobile to me, Closest thing they’ll get to it in FL 🥵
I hate them danged rotary fart rippers. the power and torque is nice though.
Mystery Machine rocks.. love the rotary sound.
Man I really missed these 30 min videos you guys put out. Love the content and can't wait to see toast rip a huge burnout at Bristol.
Cleetus! Call Crown Forklifts. Those dudes know how to fix forklifts. And they come to you
Thank you for a video that wasn’t 10 mins. 10 min videos is a tease when you got great content. !!!
I remember being most impressed when you did a (fifth gear?) Burnout in Leroy. The clutch cars, either Leroy or Neighbor I'd be intimidated by, but willing to give her hell in a burnout box.
Toast would intimidate me too much, in my experience, with clutch cars you can feel if something is breaking or going wrong through the pedals, while automatics and such just fly apart with little notice. Probably that only makes sense to an amateur like myself. But I'd be overwhelmed by toasts' deafening roar, and my inability to judge wheel speed etc. All the rpms sound the same with Toast as well haha
Neighbor hands down. That car has seen so many burnout/drifts and keeps on going like a champ.
I love seeing Sam work on the cars. We need to see more of it.
4:22 - anybody else notice the crack all the way through the whole weld? lol. 100% expected to be fair.
Why is it 100% expected? Just wondering
oh wow, i see it now
Oh yes, joys of cast welding without heat control
Also wondering why they didn't clearance the cover instead of the external counter-balance?
its just a burnout rig anyway
Hell yeah brother I’m so happy to see toast up and running and I can’t wait to see some burnouts with them and killer bee is gonna be one hell of a show
Great to see the Vargas Brothers.
Can’t wait for Bristol!! Heading out for Tennessee tomorrow afternoon! Love these events
Best purchase I made this year, I am part of the Cleeter Crew and been enjoying all the amazing content. Now also entered to win Donnie 2.0 oh Hell Yeah Brother 🇺🇲🦅🇺🇲 Yee Yee 💪
Time to make more content about the street bike engine swap golf cart. That’s thing is so sick.
Its a deathtrap! 😂
@@bhew7409 lol, you aren’t wrong.
15:19 I want to be touched the way Cleetus touches that blower
I think it be really cool to see that old thing step by step being restored back to like new again.
Can't wait to see Leroy rippin again!
i hope that engine mount will hold, the video showed what looked to be a big ass crack dead center down the weld :(
i thought the exact same
Nah,got the best welder around.yall seeing things🧐
Dude you're 100% right. Watching it on my TV and you can see a crack running right down the middle of that entire weld lol
It is cast isn’t it? In my welding of cast on the farm, you have to either weld it with high nickel cast rod(SMAW), or get both pieces orange hot, and then weld it in order for it to hold.(MIG or TIG) And even then, you have to plan for the piece to significantly warp towards the last weld that’s laid. It’s usually never easy to get cast to hold a good weld. Lot’s of heat, and high nickel, and a slow cool down time. I’m sure they did a good job.
Heck yea brother.
@@michaellong9736 yup. Preheat, weld it then needs to cool off at the same rate as they cool at different rates
Love this style of video, all the different projects going on at once is so exciting to see!
That motor block was made when I was a senior in HS....Dam I'm old! I'd take Neighbor! OG life. See you boys in Bristol!
Famous last words " This was a really trick engine till we got a hold of it"
HELL YEAH MAN! 🔥🔥🔥
It’s great seeing jackstand always getting excited about carburetors and old school motors 🤣🤣👌🏽👌🏽
I love the short guitar clip of the star spangled banner. 🤘🏼
I would definitely have to choose toast for the burnout all that power burn some butter on that toast for sure...