WHY DO I DO IT TO MYSELF? Hopefully This Bathroom Will Be Fine

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น • 47

  • @KdeB
    @KdeB ปีที่แล้ว +1

    I have done 4 bathrooms on JG Speedfit, very fast and no complaints. Press fit is even better though, Speedfit did the jobs well

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว +1

      I use speedfit fit too, it’s definitely my go to choice for pushfit

  • @cputilitysolutions
    @cputilitysolutions ปีที่แล้ว +1

    Rodes sounding good mate! Twistys look cool! Great vid

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      Cheers mate, it’s made the world of a difference. There good. Will get you out of the shit when needs be

  • @rukonza5666
    @rukonza5666 ปีที่แล้ว +1

    Good lad

  • @thomascoyne157
    @thomascoyne157 ปีที่แล้ว +1

    Nice work 👍👍👍

  • @Roller-Bathrooms
    @Roller-Bathrooms ปีที่แล้ว +1

    Great vid, them twisties keys look so handy thanks for sharing

  • @daz3745
    @daz3745 ปีที่แล้ว +1

    I'm with you on the neat soldering 🤣. Bathrooms I do in hep though, boilers and cylinders it's copper.

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว +1

      I try to use copper where I can but hep definitely has its uses. I’ll probably use it on the radiator pipe to be honest

    • @rukonza5666
      @rukonza5666 ปีที่แล้ว

      Get yourself a powerful wet vac. Clears all the water out the copper ready for soldering. Life saver, especially on flow & returns. Wessex vacs come with a step down reducer for the vac hose starts from 50 all the way down to 24 ish. Hugs a 22mm perfectly, does a great job even on 15mm.
      Does wonders to clear trapped air in the system and also does waste blockages too

  • @skerries43
    @skerries43 ปีที่แล้ว +1

    Well, I like the traditional soldering....but the press fittings with the gun is the way forward. You can still do it neat as you did, just a little but quicker and cleaner.

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      I definitely need to move over to press it would be so much quicker on the first fixes

  • @dmarriott9701
    @dmarriott9701 ปีที่แล้ว +1

    Can’t remember seeing you running the bottom joint on the tee coming up out of the floor?

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      Definitely did, might of been an editing error

    • @dmarriott9701
      @dmarriott9701 ปีที่แล้ว

      @@SmartPipePlumbing take your word for it, you were there😂

  • @koolworths
    @koolworths ปีที่แล้ว +1

    I need to file my twisties down a bit good tip. soo handy for toilets ain't used the 3/4 yet 🎉

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      Takes some doing the 3/4 is easier that the 1/2. I might be easier to put it in a video and cut it

    • @Ukplumber
      @Ukplumber ปีที่แล้ว

      @@SmartPipePlumbingcan you put a link in the comment mate please

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      @@Ukplumber there’s a link in the description

    • @Ukplumber
      @Ukplumber ปีที่แล้ว +1

      @@SmartPipePlumbing thanks mate appreciate it they look really good definitely want to try some

  • @killerbean9911
    @killerbean9911 ปีที่แล้ว +1

    I'd do anything to do another bathroom at the moment, sick of jobbing and radiators at the min 🤣

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      I find that I go through patches of the same work

  • @Tom_Plumb_PHS
    @Tom_Plumb_PHS ปีที่แล้ว +1

    For a minute I thought it was that one with the sinking shower tray😂

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      No not address that yet luckily no one’s living there

  • @Mitch-Hendren
    @Mitch-Hendren ปีที่แล้ว +1

    You're Amazing!! Another final bathroom 😄😄 reminds me of Cher's final tours all 8 of them ..😋
    You're thinking of the pennies for Christmas say what you like they are lucrative . 😁😁
    Soldered Copper for me , we've a new phenomenon over here with newer pex , they appear to be attracting rodents , little bast***s are learning how to pierce pipes for a drink ..

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      Cheers pal, touch wood not had a rodent problem for a long time

  • @truthseeker7794
    @truthseeker7794 ปีที่แล้ว +1

    The best surface to re-tile onto is existing solid tile. Ripping off old tiles and sound plaster is just unnecessary expensive work. I've often seen painters strip 3 layers of good hardened solid paint from a door and then give the door 2 inferior soft undercoats before painting. It's either a lack of knowledge or just a money spinner.

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว +4

      No it’s called doing the job properly. No actual tiler would recommend tiling on top of tile. They would never warrant it

    • @KdeB
      @KdeB ปีที่แล้ว +1

      Definitely not man. Best rip them off, too much movement tiling over tiles

  • @olympus_plumbing
    @olympus_plumbing ปีที่แล้ว +1

    Where do you buy them twisties pal

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      Dan stokes on instagram, there a link in the description

    • @olympus_plumbing
      @olympus_plumbing ปีที่แล้ว

      Unfortunately mate the link you put is private and there is no access to that Instagram. Is there no link to purchase mate

  • @Putinspurpleheaded
    @Putinspurpleheaded ปีที่แล้ว +2

    Just use wet vac nice work though, good man.

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว +2

      I don’t have a cordless wet vac. Plus this has an endless capacity where a wet vac might only hold 9litres

  • @jonessenoj6753
    @jonessenoj6753 ปีที่แล้ว +2

    Why do I do it to myself....the money...?.😊

  • @KG-ic1zf
    @KG-ic1zf ปีที่แล้ว +1

    Trial some apprentices mate, no point in getting a labourer when you can pay a apprentice a cheap fair wage and get a lot out of it in the long run

    • @KG-ic1zf
      @KG-ic1zf ปีที่แล้ว

      A lot better investment than a labourer

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      I’ve had them before but still trying to find me that wants to learn

  • @AlexRocks24-7
    @AlexRocks24-7 ปีที่แล้ว +2

    🤦🤦🤦🤦😖😖😖🙄🙄

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      ??

    • @AlexRocks24-7
      @AlexRocks24-7 ปีที่แล้ว +1

      @@SmartPipePlumbing you doing a another bathroom 😖

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      @@AlexRocks24-7 oh thought I’d done something wrong 😂😂

    • @AlexRocks24-7
      @AlexRocks24-7 ปีที่แล้ว +1

      @@SmartPipePlumbing your work is first class. I just can't believe you doing another bathroom 🤓
      Try not to burn out 🙏

    • @SmartPipePlumbing
      @SmartPipePlumbing  ปีที่แล้ว

      @@AlexRocks24-7 cheers mate 🙌