just got one of these had it installed yesterday for the few minutes i used it coming back home it worked great !!! although i didn't remove my wired bass knob yet until i can learn to trust the new wireless setup !!
does it show clipping and temperature beside voltage? if it doesn’t show this, there no point pay the high prices over sundown salts bass knobs has everything
So are you making a Dual amp knob that will control the bass and mids and highs separately, and have all the features of the WLC+. If so when will this be available.
So I really like it and I'm actually really interested in buying one but I got one main question though is the battery inside the bass knob replaceable because we all know the batteries these days don't really last very long
Hey can you actually change the sensitivity of the gain on this knob to increase the bass at different levels if so I'm going to order one today I have a dozen bass knobs all are different one will work really well and turn it up louder at the same amount each level and then I have others like the NVX one that will turn up slowly and at the very last turn it will turn way up but still be quieter at max gain then other knobs I'm really looking for something that works right and gets loud at correct levels
So I have an epicenter would I be able to still use it? WLC+ to epicenter to amplifier. Or those use work as an EQ to where you can lower or raise gain
I kill the battery all the time forgeting to turn it off...but at least being wireless i wont have another short in rca connections from wear on the wired rcs's that actually blew 1 of my amps before
I don't mind the price point at all, I think it's a great idea. I run scv 7500s and like the clip indicator. Is there anyway to still monitor a clip indicator and use this wireless knob at the same time.
I always have my amp bass knob turned all the way down when starting system up, then turn it to max for the clip monitor and simply use the rca/wireless bass knob for output control. 👍 hope this helps.
We sell a product called an RPCM, that works on the SCV-7500. It allows you to mount the power and clip light of your amplifier anywhere you'd like. Such as in your dash. So you can still monitor the lights while using a different bass knob.
The latency from turning the knob, to the actual audio level changing is nearly 0. Not noticeable at all. The only slight delay is the actual level indicator on the remote updating. Which is still very small.
@@1978coop I don't have a vehicle/system atm, just got rid of 100% of everything until next year for a new project/vehicle/system in 6-1yr, videos to come :)
@@JacobViral2 gotcha brother well I went ahead and bought one anyway I’m surprised there’s not more videos out. There of people reviewing them and using them I mean they’ve been out for almost a year now they are expensive but they are pretty sweet technology and that’s part of our game in hobby always building rebuilding never ends
@@tuff419 so I use the bass knob that comes with the lc2i pro. Slam panda I believe it’s called is a good one and there’s also universal ds18 ones that come with a volt meter built in as well
Thanks for the feedback Mark. As I replied to Tommy's comment... We do realize this is a premium product, and certainly not for everybody, or every system. We tried to get the price down as fair as we could, while also keeping quality a top priority. These are designed, programmed and assembled right here in-house. The cases are also USA made from Slam Panda. We certainly could have them made in China or the like, and probably dramatically decrease cost, but we want to have our hands in as much of the product as possible. We are also still the lowest cost universal wireless bass knob on the market right now. With many more features than any other knob out there built right in. We do have plans to possibly offer a more "stripped down" version in the future with minimal features and a cheaper price. But it's only in the idea stage, and as mentioned before, we want to ensure it is still a premium built product. So it might be a while.
They recently posted on Facebook that they sold out completely and are in the works to get more in. facebook.com/theamplab Probably took down until stock is available so customers don't order and wait 1-2 weeks on delay.
1st 2 ask Can U run multiple WLC+ ?? 🤔 10 amps on 10 WLC+ 🤔 How 2 pair multiple WLC+ & amps 🤔 Slam Panda 🐼 killing the bass game🤯 4$h😁 Aluminum housing extra sturdy Switchable LEDs Magnetic mount Long use time Rechargeable I don't see any cons only pros Thanks JV awesome content as always
Using RCA splitters, or a custom made base module from Slam Panda you could run as many amps off one knob as you'd like. We are also soon releasing a dual knob that will allow individual control of two separate amplifiers.
@Austin Heard Lower frequencies? These have been tested down to 10Hz, but there's no reason they wouldn't work down to 0hz. So lower frequencies is no issue. So yes. There will be a dual knob that will handle essentially any frequency.
Thanks for the feedback Tommy. We do realize this is a premium product, and certainly not for everybody, or every system. We tried to get the price down as fair as we could, while also keeping quality a top priority. These are designed, programmed and assembled right here in-house. The cases are also USA made from Slam Panda. We certainly could have them made in China or the like, and probably dramatically decrease cost, but we want to have our hands in as much of the product as possible. We are also still the lowest cost universal wireless bass knob on the market right now. With many more features than any other knob out there built right in. We do have plans to possibly offer a more "stripped down" version in the future with minimal features and a cheaper price. But it's only in the idea stage, and as mentioned before, we want to ensure it is still a premium built product. So it might be a while.
Amp lab makes great products. I have their voltmeter and it’s stupid quick. Best one I’ve ever had
Thank you!
just got one of these had it installed yesterday for the few minutes i used it coming back home it worked great !!! although i didn't remove my wired bass knob yet until i can learn to trust the new wireless setup !!
does it show clipping and temperature beside voltage? if it doesn’t show this, there no point pay the high prices over sundown salts bass knobs has everything
So are you making a Dual amp knob that will control the bass and mids and highs separately, and have all the features of the WLC+. If so when will this be available.
Looks awesome, someone definitely put some thought into this!
Thank you!
Really nice
So I really like it and I'm actually really interested in buying one but I got one main question though is the battery inside the bass knob replaceable because we all know the batteries these days don't really last very long
The battery is not user serviceable, but can be sent in for replacement if the need arises.
Hey can you actually change the sensitivity of the gain on this knob to increase the bass at different levels if so I'm going to order one today I have a dozen bass knobs all are different one will work really well and turn it up louder at the same amount each level and then I have others like the NVX one that will turn up slowly and at the very last turn it will turn way up but still be quieter at max gain then other knobs I'm really looking for something that works right and gets loud at correct levels
Yes as shown in 7:16 allows sensitivity settings which was cool touch when adjusting.
The last Panda wired knob I got has a bad signal in it around the 6.5 to 8.5/9 on the dial. Shows clipping at those numbers
👀
These are sick, wish i had known about them before i bought the one i just got. Oh well maybe one day I'll swap them out.
I need 1!
I believe we have Blue and Orange available in the standard version. And the WLC+ will be available in a few days.
So I have an epicenter would I be able to still use it? WLC+ to epicenter to amplifier. Or those use work as an EQ to where you can lower or raise gain
I would go head unit to bass knob to amp, no extra devices
Now that’s very interesting 🧐
I kill the battery all the time forgeting to turn it off...but at least being wireless i wont have another short in rca connections from wear on the wired rcs's that actually blew 1 of my amps before
Where do I purchase one?
Does this know have a clipping indicator?
No clipping monitor
@@JacobViral2 can this pair to the Jp83 ?
I don't mind the price point at all, I think it's a great idea. I run scv 7500s and like the clip indicator. Is there anyway to still monitor a clip indicator and use this wireless knob at the same time.
I always have my amp bass knob turned all the way down when starting system up, then turn it to max for the clip monitor and simply use the rca/wireless bass knob for output control. 👍 hope this helps.
We sell a product called an RPCM, that works on the SCV-7500. It allows you to mount the power and clip light of your amplifier anywhere you'd like. Such as in your dash. So you can still monitor the lights while using a different bass knob.
I can't believe I missed this video of yours Jacob. So have you been using it?? You like it or found any new pros or cons to it since this video?
Glad you enjoyed the video, I tried to include everything and haven't missed out on any details. No issues on my end or anything else to add.
@@JacobViral2 right on, thanks for the reply... think I'mma snag one.
Did you feel there was any latency issues with adjusting the volume at all? It doesn't seem like a large latency at all if there is any.
The latency from turning the knob, to the actual audio level changing is nearly 0. Not noticeable at all. The only slight delay is the actual level indicator on the remote updating. Which is still very small.
Nothing I could notice no, the meter read fine to and it’s hard to notice if any latency; didn’t affect the output.
How’s this holding up??any complaints at all?
No issues/complaints and just had someone else take ownership of it no problems :)
Really ,why did you replace it haha ?
@@1978coop I don't have a vehicle/system atm, just got rid of 100% of everything until next year for a new project/vehicle/system in 6-1yr, videos to come :)
@@JacobViral2 gotcha brother well I went ahead and bought one anyway I’m surprised there’s not more videos out. There of people reviewing them and using them I mean they’ve been out for almost a year now they are expensive but they are pretty sweet technology and that’s part of our game in hobby always building rebuilding never ends
I'd like to see a min hold function no reason they can't have it showing only the drop voltage that updates on a 2sec basis
I’ll stick to the $60 wired bass knobs 😅
What bass knob u use I need one. I want to run more the one amp and use 1 knob
@@tuff419 so I use the bass knob that comes with the lc2i pro. Slam panda I believe it’s called is a good one and there’s also universal ds18 ones that come with a volt meter built in as well
@@scottbe1 thanks
I like it but the display needs to be a lot bigger imo
Lol I would never pay 229 but nice idea
Agreed lol
Thanks for the feedback Mark. As I replied to Tommy's comment... We do realize this is a premium product, and certainly not for everybody, or every system. We tried to get the price down as fair as we could, while also keeping quality a top priority. These are designed, programmed and assembled right here in-house. The cases are also USA made from Slam Panda. We certainly could have them made in China or the like, and probably dramatically decrease cost, but we want to have our hands in as much of the product as possible.
We are also still the lowest cost universal wireless bass knob on the market right now. With many more features than any other knob out there built right in.
We do have plans to possibly offer a more "stripped down" version in the future with minimal features and a cheaper price. But it's only in the idea stage, and as mentioned before, we want to ensure it is still a premium built product. So it might be a while.
Why can't I find it on their website?
They recently posted on Facebook that they sold out completely and are in the works to get more in. facebook.com/theamplab Probably took down until stock is available so customers don't order and wait 1-2 weeks on delay.
I'll stick with wired bass knob
Now I see why Zach has been so busy lately.
1st 2 ask
Can U run multiple WLC+ ?? 🤔
10 amps on 10 WLC+ 🤔
How 2 pair multiple WLC+ & amps 🤔
Slam Panda 🐼 killing the bass game🤯
4$h😁
Aluminum housing extra sturdy
Switchable LEDs
Magnetic mount
Long use time
Rechargeable
I don't see any cons only pros
Thanks JV awesome content as always
Using RCA splitters, or a custom made base module from Slam Panda you could run as many amps off one knob as you'd like.
We are also soon releasing a dual knob that will allow individual control of two separate amplifiers.
@@theamplab2283 awesome thanks for the quick reply can't wait to buy a few for multiple builds, systems, vehicles
@@theamplab2283will there be a wireless dual bass knob that will support lower frequencies as well?
@Austin Heard Lower frequencies? These have been tested down to 10Hz, but there's no reason they wouldn't work down to 0hz. So lower frequencies is no issue. So yes. There will be a dual knob that will handle essentially any frequency.
@@theamplab2283 that’s my bad. I thought when I was reading the description on slam pandas website it said 10k-50k
Coat 259.99 thats crazy
Wayvway to much!!!!!!!
Thanks for the feedback Tommy. We do realize this is a premium product, and certainly not for everybody, or every system. We tried to get the price down as fair as we could, while also keeping quality a top priority. These are designed, programmed and assembled right here in-house. The cases are also USA made from Slam Panda. We certainly could have them made in China or the like, and probably dramatically decrease cost, but we want to have our hands in as much of the product as possible.
We are also still the lowest cost universal wireless bass knob on the market right now. With many more features than any other knob out there built right in.
We do have plans to possibly offer a more "stripped down" version in the future with minimal features and a cheaper price. But it's only in the idea stage, and as mentioned before, we want to ensure it is still a premium built product. So it might be a while.