radiator relocators are so fkn ugly. Sitting at the top of the bike. Can't stand those. Grizzly has such a high intake as it is. I've taken mine completely under water with no problems
Yamaha needs to give us the 850 twin from the wolverine x4 ASAP.... and crank up the POWER.... if the 500cc phazer engine can pump out 80hp the 850 should make min 100hp... we need Jurassic griz with 30 inch tires standard equipment
Ernie Desjardins well if they do that it would wound up like a can am, always breaking. That is why Honda and Yamaha have the best reliability because they aren’t loaded with power. I’m not saying they don’t have power, I’m saying they have just enough not to break themeselves
Hondude -Team Mudhogs Subaru was making the Yamaha motors they only had a 3 year contract and Yamaha didn’t decide to give them another contract for whatever reason so they went back and made their own motor again.
The max zillas on the bike make the difference big time I only know first had because my dad bought that bike off snocity when dirt trax was done with it
A V-twin and snorkel are what everyone has been waiting for ....wheel / fender flares should be molded into the body ( they don’t even have to be that wide , just a couple of inches)as an integral part , shouldn’t have to purchase some plastic bolt on stuff that requires drilling and crap , it’s just going to loosen up and be vibrating and eventually coming apart with time . Come on Yamaha, you can rule the market with just a few simple improvements . Front brush guard could use a little reinforcement too ... as well as a more useful luggage rack with anchor points , and I would hope portals for spot light / accessories ( like portable electronic equipment/ tire air compressor etc) Too much focus on big fancy aluminum wheels and graphics and stickers , needs to be more emphasis on the true outdoorsman utility features that actually have functions and usefulness. And offer the grey color plastic without painting, black steel wheels .. I don’t know 🤷🏻♂️ am I really asking for too much ? I mean wow these things will run you $11k and up , it’s ridiculously expensive as it is .
Why didn't you call this what it is?: a commercial for Yamaha & Yamaha parts...you're losing credibility. The "a" in the 1st syllable of Yamaha is pronounced as a long a, not a short a.
A.J how u doing? Its a good show. A arms r good. Its a good idea. XMR 1000R OUTLANDER. 2018. Is a lovely ride. And then i jump in my maverick. Trail 800 DPS.
I thought you would have went more into how it performed it’s drawbacks and pros while in the mud. How does it perform against an equally equipped brute force?
Maybe you can help me out. Just picked up a 2019 tactical black, sold my 2013 grizzly i have 12'' bead locks with 27' gbc dirt tamers that are new but off my 2013, I was told with the 14" wheels yamaha changed the dirt shield and i cant run my 12" wheels. Can i get base model shields to run my 12" wheels or should i just sell the package and buy 14" bead locks. Also did yamaha change the clutching off the normal models for the 27s or should i give Epi a call and get a clutch kit ? Thanks dirt trax!
I wish they'd stop teasing us already and put the yxz engine in the grizzly with manual shift, stick some snorkels and 32"assassinators on it and that would be the ultimate mud toy
i wish i could post meme respones, lol cuz what you changed from a stock grizzly adds up to about nothing in a mud whole besides having a winch winch should come standard anyways. you really need a is a lift, bigger tires, clutch kit, exhaust and fuel tuner, K&N air filter, snorkels, Rad relacate kit, and that should get you started without doing any modifications to the engine.
Still ain't impressed. You could have went over where and how high up breathers are located. And also had unedited filming of an actual run through some holes...js. you gotta turn me off of the outlander. And this video didn't do it for me...
George Duckworth do you have an outlander or getting one Polaris 50in rzr can go anywhere a 4 wheeler can go and can go through mud better that a lifted Honda on big tires and the rzr is stock
*Adds a bumper instantly a mud bike*
I thought you would add bigger tires, snorkel, radiator relocate and maybe some clutch work. Disappointing video.
radiator relocators are so fkn ugly. Sitting at the top of the bike. Can't stand those. Grizzly has such a high intake as it is. I've taken mine completely under water with no problems
Our 2006 grizzly 660 came stock with a beefy bumper and nice Warn winch I miss that from the old ones
Good simple mods that really upgrade the machine. Only thing better would have been a synthetic rope on winch
Yamaha needs to give us the 850 twin from the wolverine x4 ASAP.... and crank up the POWER.... if the 500cc phazer engine can pump out 80hp the 850 should make min 100hp... we need Jurassic griz with 30 inch tires standard equipment
Ernie Desjardins well if they do that it would wound up like a can am, always breaking. That is why Honda and Yamaha have the best reliability because they aren’t loaded with power. I’m not saying they don’t have power, I’m saying they have just enough not to break themeselves
Definitely needs more hp, I'd be happy with 70-80 over the 45 they have
YamahaMotorUSA i hope your listening
Do more videos on the grizzly!
definitely!! She’s a beast!!
Anyone notice close to the end the head lights was half full of water when they were turned on
I for one love the style of this machine. Now give us the 850 you cheap buggers!!
They went from the 708 to the 686 motor i hear?
Chris Potts ya. No idea why.
Hondude -Team Mudhogs
Subaru was making the Yamaha motors they only had a 3 year contract and Yamaha didn’t decide to give them another contract for whatever reason so they went back and made their own motor again.
Mason Cooke ahhh thanks man. Interesting!
I heard there were issues with the 708 and wasn't quite as reliable
The max zillas on the bike make the difference big time I only know first had because my dad bought that bike off snocity when dirt trax was done with it
Was that water inside of those headlights
outside muddy water stains
(@j smith ) I think you need to take another look PAUSE & PLAY‼️
They are half full of water
Did he wind the winch back up with all that moss still on it?🤦🏼♂️
That’s not mud lol, Classic Canadians.
That’s a pond, Cole film in the East texas swamps where the mud is a mix of clay and wet sand. Good luck
A V-twin and snorkel are what everyone has been waiting for ....wheel / fender flares should be molded into the body ( they don’t even have to be that wide , just a couple of inches)as an integral part , shouldn’t have to purchase some plastic bolt on stuff that requires drilling and crap , it’s just going to loosen up and be vibrating and eventually coming apart with time . Come on Yamaha, you can rule the market with just a few simple improvements . Front brush guard could use a little reinforcement too ... as well as a more useful luggage rack with anchor points , and I would hope portals for spot light / accessories ( like portable electronic equipment/ tire air compressor etc)
Too much focus on big fancy aluminum wheels and graphics and stickers , needs to be more emphasis on the true outdoorsman utility features that actually have functions and usefulness. And offer the grey color plastic without painting, black steel wheels .. I don’t know 🤷🏻♂️ am I really asking for too much ? I mean wow these things will run you $11k and up , it’s ridiculously expensive as it is .
These guys all drive Can am.
They like future parts bikes.
I WANT A GRIZZLY 700 SOOOOOOO BAD!!!!!!!
Why didn't you call this what it is?: a commercial for Yamaha
& Yamaha parts...you're losing credibility. The "a" in the 1st syllable of Yamaha is pronounced as a long a, not a short a.
There they are saying Yam a huh again ! Lol why does he say it like that???
Because he’s Canadian and technically it’s pronounced that way but we Americans say it wrong and think everything we say and do is the only way.
My2019 kodiak is on29 and a half assassinators 2 inch lift n2deep snorkel and rad relocator kit 3500 kfi winch it is pretty capable
I love these episodes 💯
are the mudzillas ok for ashplant driving
Ther zilla's and there awsome on the trail!
I would rather ITP mudlite xl tires but other than that and the obvious it looks great
A.J how u doing? Its a good show. A arms r good. Its a good idea. XMR 1000R OUTLANDER. 2018. Is a lovely ride. And then i jump in my maverick. Trail 800 DPS.
The 2019 Se didnt come with a winch? My 2021 did.
still need better tires those zillas are probably the cheesiest mud tires next to the mudlite xtrs.
Nice grizzly, but my kodiak is more mud ready like that grizz 😜😂😂
I thought you would have went more into how it performed it’s drawbacks and pros while in the mud.
How does it perform against an equally equipped brute force?
How about those lights full of water😂😂
Maybe you can help me out. Just picked up a 2019 tactical black, sold my 2013 grizzly i have 12'' bead locks with 27' gbc dirt tamers that are new but off my 2013, I was told with the 14" wheels yamaha changed the dirt shield and i cant run my 12" wheels. Can i get base model shields to run my 12" wheels or should i just sell the package and buy 14" bead locks. Also did yamaha change the clutching off the normal models for the 27s or should i give Epi a call and get a clutch kit ? Thanks dirt trax!
Does the led headlights fit the older generation?
Why doesnt this stuff just come standard.. I mean come on, its a 4-wheeler. Its always all about the money with everything.
Where’s the snorkel
Not bad for a stock quad
Not bad for a stock machine
Good four wheeler.
Where can you get the brush guard at??
I think you can get it from the Yamaha website.
Thats more of a trial machine not a mud machine
Won’t get far without snorkels and some higher ground clearance
Needs a radiator relocation kit.
I wish they'd stop teasing us already and put the yxz engine in the grizzly with manual shift, stick some snorkels and 32"assassinators on it and that would be the ultimate mud toy
Yamaha were is the 1000 Grizzly
Think we're likely to see an 850 before a one thousand. Hoping we will see it soon!
I didnt know i could do all of this 🤔
If you don't think it's possible to get much dirtier, HMU
Get your paws on. Can am. The bike u made. To win over the powoson races..u had can am. Big bore 800 re built. For major power???
Where’s the 850 twin yammie?
big bore ported head stage 2 cam and you will not need it
Yamaha 💙
He said Yam a ha
I cant stand that. Its yaw muh haw.
no he said yeamahaw
DHR Crew that’s Canadian for Yamaha.
i wish i could post meme respones, lol cuz what you changed from a stock grizzly adds up to about nothing in a mud whole besides having a winch winch should come standard anyways. you really need a is a lift, bigger tires, clutch kit, exhaust and fuel tuner, K&N air filter, snorkels, Rad relacate kit, and that should get you started without doing any modifications to the engine.
you need $16,000-$20,000 then . he went through a pound.
So is the mud machine gonna be revealed in part 2? because all you did in this video was add weight
Confident without a snorkel 🤔
hello DT can i ride for free . I'm handicap person from Philippines. ..
I just don't understand why people like trashing out their equipment mud bogging.
lol mud machine. Ohh classic Canadians
Still ain't impressed. You could have went over where and how high up breathers are located. And also had unedited filming of an actual run through some holes...js. you gotta turn me off of the outlander. And this video didn't do it for me...
George Duckworth do you have an outlander or getting one Polaris 50in rzr can go anywhere a 4 wheeler can go and can go through mud better that a lifted Honda on big tires and the rzr is stock
@@jamesmaxwell413 I should have an outlander by april
George Duckworth nice what size
@@jamesmaxwell413 1000 xmr
I would buy a Can-am if they had more ground clearance
*yes a bumper instantly makes this a mud bike, also he did nothing to improve make it a mud bike
just because everyone else does it. 2nd.
Do with a honda
Love my 16 but I do like the looks of the 19.
Sold my 13 for a 19 im pretty happy with it. ill be posting some videos soon as i get it out in the woods.
YAMAHA something more huashuashuas