The very first video I watched from you was the “H F” cheap tire machine. Probably the reason I gave you a follow. I’m going to love your review of equipment that I’m thinking about myself. Keep up the good work Dave!
I am so thankful for this channel Dave. I am one of those girls who can do stuff myself I just need some direction. Your channel is perfect for being able to fix stuff myself on my vehicle. The mark up from service departments is RIDICULOUS. I understand they need to make a living but if it’s something you can do yourself & save money why wouldn’t you.
When Harbor Freight first showed up it seemed like they only had cheap junky tools but they have really upped their game these last few years. I'm a bit of a tool snob (buy once cry once) but I recently bought their 12,000 lb Badlands winch I am pretty happy with.
Dude me too!!! Look I’m an Electrician, whom swears ONLY upon my Klein, Milwaukees, etc. and have always been a tool snob. I’ve moved right behind a Harbor Freight about 4-5years ago. And since had started a big hotel Job in Downtown NoLa. About a year and a half ago I chose to get a pry bar from there for a specific task at work. And that led to another trip, which led to another trip, and after many many many trips, I will say Harbor Freight has remodeled the entirety of the Monteleone Hotel. I am a believer like never before!!!! HD has slowly been losing me to HF😂
Nice looking jack. I remember that Escort wagon from the paint job and Saskatchewan deer hit videos. I had one in Aquamarine Frost and a 5 speed, loved that wagon. Only down side were the springs in the back used to break, other than that, it was great. Had a Mazda engine too.
Waaay better than the two ton jack. Looks like it even sits lower than than my 2T cheapie, and less crawling under the vehicle. Looks like I'll have to save up some cash and get me one. Works good on frozen ground too. Thanks for the review.
Good review! I think I may get one of these for one of my sons! Thanks, Dave!! I’m surprised the subs aren’t coming faster, but you’ve got a great channel here and they will come!!👍👍
Finally someone I trust is doing reviews of equipment I will actually use. Thanks Bro. Us poors who have the fortitude to do our own work appreciate your honesty.
Excellent review. I’ve had my eye on this jack from HF because of the low profile design and 3 ton capacity. I hesitate because a set of HF jack stands I owned were recently recalled over safety concerns. That’s made me gun shy in buying something from HF that might suffer catastrophic failure and damage my vehicle or, more importantly, me!
You need to get a Lock N Lube. I thought those were a joke until I broke down and bought one for my grease gun. I have a 3 ton Harbor Freight jack and their 20 ton shop press. Some of their stuff is pretty good.
@@javierhernandez215I've had one now for about 2 years. So far so good. It works much nicer than any jack I've previously owned. I mainly use it to lift a Nissan Altima and a Chevy traverse. I don't have a jack puck, so I usually put a small piece of 2x4. I'm careful not to run the wood grains in the same direction of the pinch weld, when lifting there. I only use it about once a month, so I expect it to last a long time. I purchased it color black, which I'm glad I did, because I could see that green getting dirty quick. I tried putting some wd40 on the wheels but they are still starting to rust, even though it's garage kept
I've had a Harbor Freight Pittsburgh 3 ton Jack for about six years. I paid $90 for it on sale. It's still works great. I even jacked up a 8'x16' shed with it. Lol. Todd from da U.P.
Hey Dave the 2 ton aluminum one is super light and nice. We have 2 of them and use them to level sheds when delivering. I really like them because they are light. We do abuse them and use them often. We did replace the first one today but I am pretty sure we have pushed them beyond the stated limits many times and they seam to have held up well.
Awesome video again! I can spend all day in Harbor Freight (some times I do) just browsing around! Some of the their products are really cheap, but a lot are quality stuff. Thanks for the review!
Thanks for the review, Dave! I use Harbor Freight in Lansing quite a bit. Being on the road full time again (later this spring, if all goes well!) definitely means this one won't be coming along ... but it'd sure come in handy when I do my brakes :) My junk should soon be a' bouncin' down the road once more! Later ... God Bless you all
Looks like it operates a lot smoother than the jack I currently have . Sometimes it's more than handy to have more than one jack too. Guess I'm going shopping as that jack looks heavier duty than mine is .
I’ve had a harbor freight jack for over 7 and the only hiccup it’s ever had was when you and I used it to pull up that well pipe! But since then I’ve used it on my wife’s Lexus and it worked great!
we got my dad this jack for Christmas... glad to see that you think its good! As I've been starting work on my own cars I have used it a number of times and it has held up great so far. Of course, only had it three months, as well as I am no expert on jacks lol
Good review. Harbor Freight sells two types of products. Cheap crap and Low cost quality tools. Sometimes it is a roll of the dice which one you are going to get. I do a lot of business with them. Buy the warranty. So far they are the best at warranties. They ask very few questions and have replaced every item I have ever brought back. Buy a warranty for the replacement. Excellent customer service.
@@cheapwheels9828 Not a problem. I like this channel. My daily driver is a 1992 Chevy 1500 Long bed work truck. V6 engine, 2/60 AC, Ladder rack and tool boxes. I purchased it 5 years ago for $800 off an auction site that sells used government vehicles in Texas. So far two sets of tires, 1 alternator, 1 battery. 1 transmission, a ignition coil and module. About 2200 in repairs. Cheaper than a truck payment. There are probably sites like this in every state Lone Star Auction Online. I only buy from government entities not repo men.
When I was jack shopping, no other brand came close to the value and quality of the HF jack. The low profile is great as it lifts higher. The grease fitting on the main hinge is nice too.
Hey Dave thank you for the video on the jack I enjoyed it and my friend at the time but the same Jack and I used it on his trailer that was 19 ft long and 8 ft tall and 8 feet wide and it had a whole bunch of stuff and that trailer and the trailer was all the way on the ground and I jacked it up with no problem at all but I tell you man that trailer was heavy and he left the Jack underneath there for a couple days and it remained at the same height
Loving the new channel and it’s inspiring me to start doing my own auto work. I’ve been researching tools needed for beginners. Would love to see what you suggest, especially for sockets and wrenches. Keep up the awesome vids!
I bought two Harbor Freight jacks (2 1/2 ton) 23 years ago. Still use them all the time. They don't leak or drift. I have to say that low profile and rapid pump would be nice. I find Harbor Freight kind of hit and miss. This sure seems like a hit.
I have a Pittsburgh 3 ton , the plug to fill the fluid is rubber. It was very difficult to replace it. If I ever need another one I will only buy one with a screw fluid plug!
Could do a short video on your station wagon? What make and model, how long you had it, who had t before you. what attracted you to it, how many miles were on it and on it now, Just a thought, love your videos
Haven’t bought anything from Harbor Freight in 17 years. Anything I ever got broke the first day of using it. Hope something like a car jack is actually made well. That could be dangerous..
I'd love to be able to afford a tool box full of American made tools ( actually most of my tools are Craftsman ) I'd like to drive Cadillacs and Lincolns too, but that's out of my budget too . The every day use tools I've had for years , so what I buy now are once in a great while use tools and I can't justify the cost sometimes .
I buy what the best value and quality I can for a specific purpose. I take pride in buying US when possible, but price matters when your in your 20's and paying for school.
Keep your junk on the road, still makes me laugh. I know you do these Vids for the teaching moments and entertainment....but heck Product companies should have you do Vid's on their products! Pretty great practical endorsement. A regular Guy, in a regular home garage, doing regular maintenance!
I have the same one in black and have had it 5 years and still going strong!!
Thanks, thats good to know
The very first video I watched from you was the “H F” cheap tire machine. Probably the reason I gave you a follow. I’m going to love your review of equipment that I’m thinking about myself. Keep up the good work Dave!
Awesome! Thank you!
I am so thankful for this channel Dave. I am one of those girls who can do stuff myself I just need some direction. Your channel is perfect for being able to fix stuff myself on my vehicle. The mark up from service departments is RIDICULOUS. I understand they need to make a living but if it’s something you can do yourself & save money why wouldn’t you.
Well said! I hope you get some value out of the channel
When Harbor Freight first showed up it seemed like they only had cheap junky tools but they have really upped their game these last few years. I'm a bit of a tool snob (buy once cry once) but I recently bought their 12,000 lb Badlands winch I am pretty happy with.
right on
Dude me too!!! Look I’m an Electrician, whom swears ONLY upon my Klein, Milwaukees, etc. and have always been a tool snob. I’ve moved right behind a Harbor Freight about 4-5years ago. And since had started a big hotel Job in Downtown NoLa. About a year and a half ago I chose to get a pry bar from there for a specific task at work. And that led to another trip, which led to another trip, and after many many many trips, I will say Harbor Freight has remodeled the entirety of the Monteleone Hotel. I am a believer like never before!!!! HD has slowly been losing me to HF😂
Love your style man. Clear calm and concise. You could redo all the videos that are done and id watch yours over the others.
I appreciate that!
Fellow Michigander here, in Grayling, I will say it again, I love this new channel of yours.
Thanks !!
I have a Pittsburgh jack from Harbor freight that's still going strong 10 years. Great channel subbed right away.
Cool, thanks
Nice looking jack. I remember that Escort wagon from the paint job and Saskatchewan deer hit videos. I had one in Aquamarine Frost and a 5 speed, loved that wagon. Only down side were the springs in the back used to break, other than that, it was great. Had a Mazda engine too.
Yup. My stock struts BROKE too. The aftermarket ones just wear out but the OEM ones broke
@@cheapwheels9828 sounds like a new video... 😁
Waaay better than the two ton jack. Looks like it even sits lower than than my 2T cheapie, and less crawling under the vehicle. Looks like I'll have to save up some cash and get me one. Works good on frozen ground too. Thanks for the review.
Ive never had a good jack....just cheapo's so this one has been a treat to use
Love Harbor Freight. Thanks for testing this out for us Dave!
Any time!
Good review! I think I may get one of these for one of my sons! Thanks, Dave!! I’m surprised the subs aren’t coming faster, but you’ve got a great channel here and they will come!!👍👍
Thanks
Finally someone I trust is doing reviews of equipment I will actually use. Thanks Bro. Us poors who have the fortitude to do our own work appreciate your honesty.
Thanks brother
Excellent review. I’ve had my eye on this jack from HF because of the low profile design and 3 ton capacity. I hesitate because a set of HF jack stands I owned were recently recalled over safety concerns. That’s made me gun shy in buying something from HF that might suffer catastrophic failure and damage my vehicle or, more importantly, me!
I havent heard a bad word about the jacks.....I have about the stands.....but I never use stands, I use HUGE hardwood blocks
You need to get a Lock N Lube. I thought those were a joke until I broke down and bought one for my grease gun. I have a 3 ton Harbor Freight jack and their 20 ton shop press. Some of their stuff is pretty good.
I finally got a locking coupler, makes hard to reach chassis stuff much easier. No more fiddling or wasting grease.
Thats just it, this one generally snaps on tight...but it didnt on this fitting
Like you said, lets revisit the jack in a couple years. Like the color though.
Thanks
@@cheapwheels9828and two year later the verdict is____________?
@@javierhernandez215I've had one now for about 2 years. So far so good. It works much nicer than any jack I've previously owned. I mainly use it to lift a Nissan Altima and a Chevy traverse. I don't have a jack puck, so I usually put a small piece of 2x4. I'm careful not to run the wood grains in the same direction of the pinch weld, when lifting there. I only use it about once a month, so I expect it to last a long time. I purchased it color black, which I'm glad I did, because I could see that green getting dirty quick. I tried putting some wd40 on the wheels but they are still starting to rust, even though it's garage kept
Been looking at one of those to buy. Have to say I was hesitant to buy one but not anymore. Got to have one. Thanks for the review. I enjoyed it.
Any time!
I've had a Harbor Freight Pittsburgh 3 ton Jack for about six years. I paid $90 for it on sale. It's still works great. I even jacked up a 8'x16' shed with it. Lol. Todd from da U.P.
Right on
Hey Dave the 2 ton aluminum one is super light and nice. We have 2 of them and use them to level sheds when delivering. I really like them because they are light. We do abuse them and use them often. We did replace the first one today but I am pretty sure we have pushed them beyond the stated limits many times and they seam to have held up well.
Thats good to know. Thanks
We purchased the harbor freight brand, which appears to be the same equip.emt, different decals. We love it. For us too, it was a bottle jack upgrade.
I have this same jack and it hasn’t let me down yet.
awesome
Awesome video again! I can spend all day in Harbor Freight (some times I do) just browsing around! Some of the their products are really cheap, but a lot are quality stuff. Thanks for the review!
Thank you!
I have had the red pittsburgh 3 ton low profile....heaviern a pregnant heifer but a monster. I've had it two years....wonderful
Awesome
Thanks for the review, Dave! I use Harbor Freight in Lansing quite a bit. Being on the road full time again (later this spring, if all goes well!) definitely means this one won't be coming along ... but it'd sure come in handy when I do my brakes :) My junk should soon be a' bouncin' down the road once more! Later ... God Bless you all
Thanks Dave
Looks like it operates a lot smoother than the jack I currently have . Sometimes it's more than handy to have more than one jack too. Guess I'm going shopping as that jack looks heavier duty than mine is .
Its been a peach so far
I’ve had a harbor freight jack for over 7 and the only hiccup it’s ever had was when you and I used it to pull up that well pipe! But since then I’ve used it on my wife’s Lexus and it worked great!
LOL....could have been the odd angles we were trying to use it with.
@@cheapwheels9828 probably
we got my dad this jack for Christmas... glad to see that you think its good! As I've been starting work on my own cars I have used it a number of times and it has held up great so far. Of course, only had it three months, as well as I am no expert on jacks lol
So far I think its been great
Good review.
Harbor Freight sells two types of products.
Cheap crap and Low cost quality tools.
Sometimes it is a roll of the dice which one you are going to get.
I do a lot of business with them.
Buy the warranty.
So far they are the best at warranties.
They ask very few questions and have replaced every item I have ever brought back.
Buy a warranty for the replacement.
Excellent customer service.
Thanks for the info!
@@cheapwheels9828 Not a problem.
I like this channel.
My daily driver is a 1992 Chevy 1500 Long bed work truck. V6 engine, 2/60 AC, Ladder rack and tool boxes.
I purchased it 5 years ago for $800 off an auction site that sells used government vehicles in Texas.
So far two sets of tires, 1 alternator, 1 battery. 1 transmission, a ignition coil and module.
About 2200 in repairs.
Cheaper than a truck payment.
There are probably sites like this in every state
Lone Star Auction Online.
I only buy from government entities not repo men.
When I was jack shopping, no other brand came close to the value and quality of the HF jack. The low profile is great as it lifts higher. The grease fitting on the main hinge is nice too.
Totally agree
It's a good jack it was on sale for $129 few days ago but it's back up to 189 now. When they have another sale I'm definitely picking up a couple.
Our jack from HF is about 8 yrs old, still working just fine!
In my opinion, damn good buy... back then it was on sale for 89...
right on!
Do u bleed it a lot or add oil. How ab greasing?
Hey Dave thank you for the video on the jack I enjoyed it and my friend at the time but the same Jack and I used it on his trailer that was 19 ft long and 8 ft tall and 8 feet wide and it had a whole bunch of stuff and that trailer and the trailer was all the way on the ground and I jacked it up with no problem at all but I tell you man that trailer was heavy and he left the Jack underneath there for a couple days and it remained at the same height
Nice!
Great video Dave Whipple.
Thanks Ron
I've had this for several years and have had no issues with it.
right on
Thanks for the great review of the Jack.
Any time!
Enjoying the new channel. Best of luck with it!
Much appreciated!
Sounds like a good match for the CRV, after my son lifts it. I'm a big fan of HF. .. and CW. Thanks for the review, Dave.
Thanks Thomas
Loving the new channel and it’s inspiring me to start doing my own auto work. I’ve been researching tools needed for beginners. Would love to see what you suggest, especially for sockets and wrenches. Keep up the awesome vids!
Its hard to find bad sockets....unless you buy the cheapest thing out there
Looks like a winner for the price point! 👍
I think so too!
I sure wish we had H-F here in the UK.
right
I have a Harbor Freight Jack 3 ton I use it in my 3/4 ton Fords loaded with portable welder torches and hand tools! Weighs a lot
right on
If you trip over that jack, You better be tested for color blindness. Keep your junk on the road.
You got that right!
Might want to check the oil level. Mine was low out of the box but the thing is an absolute tank.
i got the daytons 3 ton HD (NON LP) a few weeks ago for $105 with a coupon . way more than i need but i'm into over kill . take care dude :)
Thanks
I inspected my jack and it was made perfectly
This jack is now 189.00 plus tax. Total 201.00 out the door.
Me while looking for harbor freight Jack reviews-
“That looks like the bush radical guy” plays video.. “ because it is Dave!” Haha awesome
This is a great channel. Thanks Dave.
Glad you enjoy it!
I bought the power torque brand. From 0riellys on sale for 189.00 . basically the same jack . I shoulda checked harbour freight .lol .
Right on
Looks good n Solid
The used car tire place where i live uses Daytona Jacks and they abuse the hell out of them and they still keep jacking!
I bought two Harbor Freight jacks (2 1/2 ton) 23 years ago. Still use them all the time. They don't leak or drift. I have to say that low profile and rapid pump would be nice. I find Harbor Freight kind of hit and miss. This sure seems like a hit.
So far so good
I got this same jack, I was at harbor freight yesterday, now they have a purple one with a metallic clear coat
I have a Pittsburgh 3 ton , the plug to fill the fluid is rubber. It was very difficult to replace it. If I ever need another one I will only buy one with a screw fluid plug!
Dang Dave, didn't know you had this channel too!
I love Harbor freight. More tools for your money. Haven't had problems with much except a few fittings
me either
There great, but just like any jack just don't go under anything it's holding up without a physical block or jack stand.
Sept 2023 these are $240 regular price
Maybe you're thinking of the long reach version.
Could do a short video on your station wagon? What make and model, how long you had it, who had t before you. what attracted you to it, how many miles were on it and on it now, Just a thought, love your videos
The wagon has 318K right now. I bought it with 53k. Ive been driving it for 12 years.
@@cheapwheels9828 it's a Ford/Mazda?
I was at harbor fr. Today great store lot of cheap suff .
right on
Hey dave, you should do a video on how to fix a broken power steering line.
Good idea
I definitely agree, that's an awesome heavy duty jack👌🙂
Thanks
I really enjoy your videos. I can learn from you. Could you do a video of fixing a window raising motor if you use one. Thanks.
Great suggestion!
I’m looking for a floor jack that doesn’t cost so much. Thanks for showing this video cheap wheels.
The Daytona looks exactly like the 550$ 650$ snapon jack. definitely would buy the Daytona
I believe snap on tried to sue harbor freight or at least tried to make them stop making this jack.
Ive heard that too
Daytona...70s mopar...that would make that a sublime lime green lol.
LOL
I already have a good jack ( Mac ) I bought used at a yard sale, but if I needed one I would consider it.
right on
How has this jack stood up to acouple years and is there any differnce from this one and the 3 ton pittsburgh
Have a safe blessed day! 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
You too!!
Haven’t bought anything from Harbor Freight in 17 years. Anything I ever got broke the first day of using it. Hope something like a car jack is actually made well. That could be dangerous..
So far so good
@@cheapwheels9828 Of course you'd NEVER get under a vehicle supported only by the jack, no matter who made it
Thanks for showing us this.
my pleasure
Harbor Freight is privately owned vs being public, so its return on revenue can be lower.
Another great video Dave!
Thanks !
For the common man, it's not a bad item to have on hand which saves you money down the road by being able to do your own repairs.
true
I have been thinking about getting one. You may have sold me on it................... 👍👍
Go for it!
Harbor freight does indeed use weird sized grease fittings. I was able to swap mine out for one that actually fit my grease gun.
right on
Question, how easy is the pump action? I just bought one and it seems to be hard to pump compared to my cheap Amazon Jack
Hope it’s good. I have two
I just bought the HF tire changing set up yesterday. Looking t it, I think its going to be a brutal workout! LOL
Its not too bad to use.
..GOOD ONE, STAY SAFE..
Thanks
Never changed my oil, but I wanna start - guess I found the jack I'll buy
right on
How has this held up? Asking in June 2023
Thx for the review 💕🙏💕
My pleasure
Why didn’t u bleed the system or check if u needed to add hydro oil
I just got one today and it’s leaking oil from 1 of the dual piston, why is that?
Is it with the $210 price tag of today?
Love harbor freight!!!
me too
What’s cheaper the 3 Ton Pittsburgh floor Jack. Or that Daytona.
idk
I love mine dave, bit did you pull the cover plate and check the hydrolic fluid..?👍👍💚
no.....I didnt
Hi Dave.
Hello
Great jack!
Thanks!
It was so heavy i had a hard time getting it out of the box!
Again Great Information!
Thanks Glenda
Great review. Thank you very much Sir. God bless.
My pleasure!
Add a pair of jack stands and your good to go.
I have 2 huge beach wood blocks I use
As a general rule, do you avoid chinese made tools and equipment?
I'd love to be able to afford a tool box full of American made tools ( actually most of my tools are Craftsman ) I'd like to drive Cadillacs and Lincolns too, but that's out of my budget too . The every day use tools I've had for years , so what I buy now are once in a great while use tools and I can't justify the cost sometimes .
I buy what the best value and quality I can for a specific purpose. I take pride in buying US when possible, but price matters when your in your 20's and paying for school.
@@xc8487 ; Price maters when you're in your sixties and living on Social Security too .
I dont really think about it. I have an old set of SK Wayne sockets and wrachets.....but I dont think they are any better than some Husky stuff
Does anyone know what’s the difference between this one and the super duty one ?
Keep your junk on the road, still makes me laugh. I know you do these Vids for the teaching moments and entertainment....but heck Product companies should have you do Vid's on their products! Pretty great practical endorsement. A regular Guy, in a regular home garage, doing regular maintenance!
Thanks
You were supposed to bleed the air from the pistons at the oil fill on the jack before you used it.
How do you bleed them? Do I just remove the filler and pump, or what is the process?
I did it almost 9 months ago, google it, so I do not give you the wrong info brother.
How's it holding up
perfect
It’s 159 dollars 💵 now