Great video! I just recently bought a 99 GT Four and I was looking into getting some coilovers but I keep seeing people having to weld them? I would definitely like to stay away from that if possible, does anyone have any info on this? It seems like your install was way easier. Hopefully this isn’t too stupid of a question, thanks for your time.
you said that the camber was not right. I'm thinking of getting these coilovers but what has to happen if there is indeed i problem with the camber? i don't really know how it works
Hey I commented not that long ago, bout to buy my wheels 17x9 and offset spacers to make it 35mm. with 215-45-17 tires. I have a ST and am hopeful it’s the same fitment as your GT. did you have any issues installing your wheels i have stock springs.
@@charliexiong6541 was there any rubbing? i don’t know if I should get the spacers to make the wheel pop out more cause originally the offset is 25 what’s yours? i don’t have coilovers either
@@nelsontorres317 I can't recall exactly what the offset is but it's probably 35 or 30. 17x9 is wide enough to stick out a little. You can still go with 225 or 235 for tires if you don't plan on lowering your car too low
Hi, I'm located in NorCal north Sacramento. I already purchased a 4th Gen 3sgte and did the swap. Anyway, how much are you asking for your 3sgte and what gen is it? I might have some potential buyers.
2500 for the engine and wire harness it's a gen 5 done by doug at wire gap... But the harness was made for my right hand drive Celica so we'll have to probably modified but I'm not sure how much extending... Also includes a stage 2 South bend endurance clutch and aluminum fidenza flywheel
Charlie, thanks a lot for posting this up. I'm looking to set up an ST185 GT-Four which is quite similar, so this will be very helpful.
They look great with the coilovers and hope the motor swap happen soon.
After finally making my celica reliable , I finally installed my coils today after having dem underneath my bed for 10 months
She wants to help dad install them ❤
Great video! I just recently bought a 99 GT Four and I was looking into getting some coilovers but I keep seeing people having to weld them? I would definitely like to stay away from that if possible, does anyone have any info on this? It seems like your install was way easier. Hopefully this isn’t too stupid of a question, thanks for your time.
there’s no welding required if you purchased the correct coil overs. The installed is straight forward.
What's your spring rate? planning on getting the same coil overs on my 6th gen
nice car i have one same color
Look nice
you said that the camber was not right. I'm thinking of getting these coilovers but what has to happen if there is indeed i problem with the camber? i don't really know how it works
Hi, I had to purchase a pair of camber bolts and had an alignment done to fix it
Hi Charlie. Do you have the link for the camber bolts please?
Hey I commented not that long ago, bout to buy my wheels 17x9 and offset spacers to make it 35mm. with 215-45-17 tires. I have a ST and am hopeful it’s the same fitment as your GT. did you have any issues installing your wheels i have stock springs.
Hi, no issues so long as you don’t slammed it.
@@charliexiong6541 was there any rubbing? i don’t know if I should get the spacers to make the wheel pop out more cause originally the offset is 25 what’s yours? i don’t have coilovers either
@@nelsontorres317 I can't recall exactly what the offset is but it's probably 35 or 30. 17x9 is wide enough to stick out a little. You can still go with 225 or 235 for tires if you don't plan on lowering your car too low
Where can I get the spoiler on your car
eBay search celica st205 trd spoiler/wing. Bought mine from UK.
sweet wheels where are they from???
Jnc wheels 17x9
@@charliexiong6541 5x100?
@@nelsontorres317 yes 5x100
Whats the wheel spec?
@@karthikpm8354 17x9 offset 25
Where are you at in California? I have a 5th gen 3sgte I can sell you... I was going to put it in my GT4 but I decided to build the Gen 3...
Hi, I'm located in NorCal north Sacramento. I already purchased a 4th Gen 3sgte and did the swap. Anyway, how much are you asking for your 3sgte and what gen is it? I might have some potential buyers.
@@charliexiong6541 your right by me...I'm in elk Grove California... I'm putting an engine real 94 Celica GT4 WRC... When I'm done come check it out
2500 for the engine and wire harness it's a gen 5 done by doug at wire gap... But the harness was made for my right hand drive Celica so we'll have to probably modified but I'm not sure how much extending... Also includes a stage 2 South bend endurance clutch and aluminum fidenza flywheel
what is the fitment for your tires?
17x9 offset 35 on 215-45-17
whats the link for the coilovers?
Fitmentindustries.com
Wait I thought all gt4s original suspension was super strut... But yours weren't...
This is a st204 celica
What is the part number for the coils ?
I don’t remember but you can find the coil overs on fitment industries or eBay.
@@charliexiong6541 I have a 1999 Toyota Celica I bought bc Coilovers for it and they don’t fit in the front
@@charliexiong6541 they are not on figment industry’s
@@chrislancaster1073 which area don’t fit? End links? Brake lines? The 19mm bolts don’t aligned or others?
@@chrislancaster1073 I bought mine bc from fitment industries
How much with the coilovers?
$1100 from fitment industries
are those GT-4 sir?
Unfortunately no
@@charliexiong6541 I Love what did to your celica,,, I'll do the same if I can buy a celica,,someday...