BLACK TESLA MODEL 3 GETS FULL PAINT CORRECTION CERAMIC COATING 🔥

SCHEDULE YOUR VEHICLE WITH US TODAY AT ✅✅
Glossitdetailstudio.com
LIVE AND VIRTUAL TRAINING ✅⬇️
glossitunivers...
EVO 21 Dual Action Polisher
gloss-it.com/c...
EVO 15 Dual Action Polisher
gloss-it.com/c...
POLISHING PADS USED FOR CUTTING AND POLISHING
glossit.com/co...
POLISHES
EVO 800 Heavy Cutting Compound
glossit.com/co...
EVO 2000 Moderate Cut Compound
gloss-it.com/c...
EVO 3000 Ultra Finish Compound
glossit.com/co...
EVO DIY GRAPHENE CERAMIC COATING
glossit.com/co...
On this edition of the weekly buff we have yet another Tesla Model 3 in black. Tesla usually doesnt do well with their paint condition straight from the factory unless its their new premium colors with metallic flake which come in decent condition. The owner decided to go with a 2 step paint correction to remove water spots, Ceramic Coating, PPF to prevent rock chips, as well as changing the color of the caliers from stock to red with no tesla logo.
The first thing we did as always is a full decontamination wash and exterior detail. We used our EVO Shampoo with the EVO Foam Cannon, and a mild green clay bar to remove anything abrasive that may have been stuck on the paint finish that could introduce more damage during correction if not removed. We also used our EVO Wheel Gel as well as Gloss IT APC to help with breaking down brake dust as well as inside the wheel wells.
Once that was completed the next step was to begin paint correction. Josh, Jr, and Nick began the process with our EVO 800 Heavy Cut polish as well as our BRAND NEW EVO Yellow Wool pad, that has cut down our work time in half. This first step will remove the water spots, as well as the heavy scratching that was left in the paint from the dealership. Once the first step is complete it will leave some haze and micro marring from the wool pad, so the second step will be a Microfiber pad with our EVO 2000 Cut Finishing polish to remove the marring from the wool pad. Josh and Jr made the call to also use a White Foam 100ppi pad along with our 3000 Finishing polish to remove the final small amount of haze they could see in the paint.
The final step was to apply a full array of our Ceramic Coatings starting with our EVO PRO Graphene Ceramic coating to protect the paint finish from UV damage, permanent water spots, as well as permanent staining from bugs, bird droppings, etc. We also applied our EVO Plastic Renew & Protect to give all the plastic trim years of protection against fading from the sun, our EVO Wheel & Caliper coating to make it much easier to clean and prevent staining from brake dust on your wheels, as well as our EVO Glass coating to help prevent water spot on your glass and windshield.
Once the vehicle was complete The owner came in to pick it up, and was blown away by the difference from when he dropped it off. If youd like to see your vehicle on the next weekly buff make sure to comment, drop a like, and subscribe to our channel for all future content.