This is Awesome. Great Job. After a few upgrades on my wpl and i had to get a fishing tackle box to hold all my extra parts. LOVE IT. don't take long to have extra parts. hehe
Once upon a time, Tractor Supply had these 20 drawer parts bin things. They stand about 18 inches, maybe 20 inches wide. I've filled two of those since I've gotten into this. I have three separate cases for all things 24 scale. One of those is solely dedicated to comp rigs. It gets out of hand. I really should downsize! Maybe it's time for some give-a-ways?
OK, so I posted a link earlier but it seems YT won't allow it and took down my comment. This is for you and anyone else looking to do this DIY fix. If you Google 0.95mm pins, you'll get several links to Amazon sales. The first one I got was "uxcell 100 Pcs 0.95mm x 15.8mm Parallel Dowel Pins Fasten Elements" which are in stainless steel. Maybe you can add this to your description, not sure how that works, but I hope this helps. Cheers!
Bugs the sh** out of me that YT does that. I've been bitten by that before too. Thanks for the heads up! I did find what you found and I will add it to the description. Thanks!
One of the reasons I won't run Meus axles is that they released a U-Joint set for the Super 8 and the truck didn't even make it off the bench before the pins popped and destroyed one side just checking steering angle. But for these, and the amount I run this truck, this fix was perfect.
Thanks! Hope it helps somebody out there. Re: DLux - I have a set of their shorter shafts for some old stock-width Treal axles but that's it. They were sold out last I looked.
Honestly, I don't keep up with it. I think for anyone who bought a set of ones from the Feb/March run of them should automatically get a set of upgrades sent out as a consolation for poor QC. I did order and receive the newer, more robust, set for $39 but I haven't installed them yet.
Out of stock - as everything usually is - and will be out until end of may. The real work here is that I just didn't click to buy something; I fixed it.
This is Awesome. Great Job. After a few upgrades on my wpl and i had to get a fishing tackle box to hold all my extra parts. LOVE IT. don't take long to have extra parts. hehe
Once upon a time, Tractor Supply had these 20 drawer parts bin things. They stand about 18 inches, maybe 20 inches wide. I've filled two of those since I've gotten into this. I have three separate cases for all things 24 scale. One of those is solely dedicated to comp rigs. It gets out of hand. I really should downsize! Maybe it's time for some give-a-ways?
@@VermontScaleCustoms I get anymore rigs i am going to need one of those 20 drawers hahahaha
A good caliper really makes things easier 🤘✌️
Agreed. No bench is complete without one (or two, or three.)
Hello,
Nice and interesting update!👍
Greetings Seven🖖
Thank you! Gotta keep 'em running!🖖😎
Oh Harbor freight has the Alligator clip 2 arm stand thing, some have magnify glass also. Man i love it. It's like having a third hand.
I do have one of those - all the way downstair in the basement - as well as a gooseneck one on my solder station. I'm just lazy!
@@VermontScaleCustoms Hahahah I do that too. I'll work twice as hard to not go downstairs to get the tool i need . hehe
OK, so I posted a link earlier but it seems YT won't allow it and took down my comment. This is for you and anyone else looking to do this DIY fix. If you Google 0.95mm pins, you'll get several links to Amazon sales. The first one I got was "uxcell 100 Pcs 0.95mm x 15.8mm Parallel Dowel Pins Fasten Elements" which are in stainless steel. Maybe you can add this to your description, not sure how that works, but I hope this helps. Cheers!
Bugs the sh** out of me that YT does that. I've been bitten by that before too. Thanks for the heads up! I did find what you found and I will add it to the description. Thanks!
I got tired of messing with these. Lgrp just dropped some super 8 ujoint inner axles. Throwing away all my cvd crap
One of the reasons I won't run Meus axles is that they released a U-Joint set for the Super 8 and the truck didn't even make it off the bench before the pins popped and destroyed one side just checking steering angle. But for these, and the amount I run this truck, this fix was perfect.
@. Iv had more problems with the meus axles than the super 8.
good fix...have you tried the DLUX SUPER8 SHAFTS?...Also would a tiny bit of ca glue stop the brass sleeve coming off?
Thanks! Hope it helps somebody out there. Re: DLux - I have a set of their shorter shafts for some old stock-width Treal axles but that's it. They were sold out last I looked.
Is this about the V2, i thought have fixed the issues ? I have one set but havent ran them a lot so far. Even bought two spares.
Honestly, I don't keep up with it. I think for anyone who bought a set of ones from the Feb/March run of them should automatically get a set of upgrades sent out as a consolation for poor QC. I did order and receive the newer, more robust, set for $39 but I haven't installed them yet.
@@VermontScaleCustoms I bought mine about one year ago. Well if sth. breaks i will get back to this.
Dlux fab
Out of stock - as everything usually is - and will be out until end of may.
The real work here is that I just didn't click to buy something; I fixed it.