Mastering Your CNC: 7 Techniques You Need

Become a BETTER CNC woodworker with some of my favorite tips and tricks, perfect for beginning CNC woodworkers, or experienced professionals!
CNC and SVG Files available at - www.sothpawdesigns.com/store
PWNCNC Spindle - pwncnc.com/?ref=sothpaw\
Save 5% with Discount Code - SOTHPAW
xTool D1 Pro - www.xtool.com/products/portab...
Chapters
00:00 Introduction
00:35 Onefinity CNC 15 Month Review
12:33 Hidden CNC Costs When Building Your Business
27:05 Painting and Sealing V Carve Inlays
38:44 Upgrading To A PWN CNC Spindle
49:30 Making Perfect CNC Inlays
1:00:15 Replacing Your Other Tools With A CNC
1:12:15 How To Use A Touch Probe

[@Roxann-gz3yg]

You were saying about your cnc running off track and you weren't sure why
I've had this happen a couple of times in the past and it took a long time to realise what was happening
And with my machine it turned out to be the very fine dust being crested when machining MDF
I've not had it happen with any other material
Well not yet
Good video and great content
Before I forget
Hello from the UK

[@SothpawDesigns]

Thank you. I've actually had it happen a couple of times recently, and I think it's that I need to perform some maintenance and clean my rails and ball screws. Also, someone mentioned a static electricity discharge on my dust removal, which is a possibility.

[@Roxann-gz3yg]

@SothpawDesigns I cured mine buy never cutting MDF without a dust boot on
And as you said a bit more maintenance
I've just upgraded mine from a 40/40 to a 40/80
The new bed and waste board set up seams to be a lot more robust

[@drewpickard554]

So to throw out some more tools I wind up using alot with the cnc. Super cheap harbor freight orange picks and the razor knives at the checkout. They maybe be cheap and not great, but sooooo good for doing the little bits of cleanout

[@SothpawDesigns]

Right on. Good call.

[@OneInchOff]

Great video. I heard the next Vectric update will have a vcarve inlay option.

[@TerrapinCreations666]

Also, if you think the air cooled spindle is quiet, you should hear how quiet a water cooled spindle is. It’s crazy quiet.

[@af2001]

Good afternoon

[@SothpawDesigns]

Good day!!

[@prius9253]

No links in the description. Interesting

[@TheHelicapt]

Thinking of getting this same CNC setup and adding it to my garage shop but need to keep the dust level down, does the shop vac attached really get all the dust and fine particles ?

[@SothpawDesigns]

The Dewalt shop vac that i use actually actually does a decent job. The dust boot that I got from PWN CNC has a little to be desired. If you have a good dustboot, then in my opinion, a shop vac goes a long way

[@Timmay1719]

I want the game controller

[@dfrosted]

What is the masking material called? Said it was in the description, but I don’t see it.

[@SothpawDesigns]

Sorry. Forgot to include the link. Here you go. amzn.to/3TkT1DD

[@TerrapinCreations666]

I didn’t see a link for the CA glue.

[@SothpawDesigns]

Sorry. Here you go. amzn.to/3uTkTWd

[@danielstein8320]

Gold Leaf???