I cut the spring about an inch and a half from the bottom where it attaches to the primer slide. I then cut about 1/2 in off of the spring. I then took a 6 - 32 machine screw that I cut off the head the screw is about 2 inches long and screwed both half of the springs back together using the screw that I cut. This allows me to adjust the length of the spring to the exact length that I need in order to have the primer slide go back far enough to pick up the next primer but not go too far or not fat enough. After I got the length adjusted I took a piece of metal coat hanger and inserted it into the top of the spring and trimmed it to length about 1/4 inch from the top of the spring. This also helps keep the spring from flexing. The pen cover helps to also keep the spring from wanting to bend. Once you get it dialed in it works great. Yesterday I loaded 623 9mm in one hour. Loading the primer trays is the slowest part of the process. Good luck
Do you have the STLs for the case feeder and bullet feeder? Do you have any recommendations on how to modify the springs as you mentioned? Did you follow a guide for the power checker? I appreciate the video!
@@joescavone6174 I got the STL files off of thingiverse for the bullet feeder which also has files for a case feeder by the same guy. He has a TH-cam video about assembly. I cut the spring about an inch from the bottom and then removed about 1/2 inch from the top part I got a 6/32 screw 1.5 inches long and cut the head off of it. Screw the two pieces together using the screw and adjust to the length you need to make the primer feeder not over or under extend. I inserted a piece of metal coat hanger in the top portion of the spring and cut it to just a little short of the spring top. I also took a bic pen and used the outer portion as a sleeve over the spring to help the spring from flexing. www.thingiverse.com/thing:3438003 Good luck.
@@mr.e9727 I 3d printed it. I got the STL files on thingiverse. Since that video I've added a 3d printed case feeder like the bullet feeder. I'll make a new video in the coming week or so.
Hi Carl, thanks for the video! Greetings from Brazil! Quick question, i didnt get what mod have you made in the primer spring, besides adding the pen cover on it. You mentioned a screw but I wasnt able to see it. Can you explain that a little better? Appreciate your support man
I cut the spring about an inch and a half from the bottom where it attaches to the primer slide. I then cut about 1/2 in off of the spring. I then took a 6 - 32 machine screw that I cut off the head the screw is about 2 inches long and screwed both half of the springs back together using the screw that I cut. This allows me to adjust the length of the spring to the exact length that I need in order to have the primer slide go back far enough to pick up the next primer but not go too far or not fat enough. After I got the length adjusted I took a piece of metal coat hanger and inserted it into the top of the spring and trimmed it to length about 1/4 inch from the top of the spring. This also helps keep the spring from flexing. The pen cover helps to also keep the spring from wanting to bend.
Once you get it dialed in it works great. Yesterday I loaded 623 9mm in one hour. Loading the primer trays is the slowest part of the process.
Good luck
Hi Carl. Do you have more details on the powder check you added?
No but you can buy then
Do you have the STLs for the case feeder and bullet feeder? Do you have any recommendations on how to modify the springs as you mentioned? Did you follow a guide for the power checker? I appreciate the video!
@@joescavone6174 I got the STL files off of thingiverse for the bullet feeder which also has files for a case feeder by the same guy. He has a TH-cam video about assembly. I cut the spring about an inch from the bottom and then removed about 1/2 inch from the top part I got a 6/32 screw 1.5 inches long and cut the head off of it. Screw the two pieces together using the screw and adjust to the length you need to make the primer feeder not over or under extend.
I inserted a piece of metal coat hanger in the top portion of the spring and cut it to just a little short of the spring top.
I also took a bic pen and used the outer portion as a sleeve over the spring to help the spring from flexing.
www.thingiverse.com/thing:3438003
Good luck.
@@joescavone6174 the powder check is just something I put together with stuff I had laying around, it's pretty simple.
how about the primer feeder extension?
@@mr.e9727 I 3d printed it. I got the STL files on thingiverse. Since that video I've added a 3d printed case feeder like the bullet feeder. I'll make a new video in the coming week or so.
Hi Carl, thanks for the video! Greetings from Brazil! Quick question, i didnt get what mod have you made in the primer spring, besides adding the pen cover on it. You mentioned a screw but I wasnt able to see it. Can you explain that a little better? Appreciate your support man
Boa noite, sofrendo com a mola também?
@@andreburgues546 to la no grupo do zap tb hahaha tentando achar solucao pra todos
Qual o grupo?
Hi