+János Kajtár You welcome. Thank you. Now i must look to another problem with this camera, LCD screen don't work. Everything else (photo, focus, etc...) is functional.
@@78b39062af45ec what screwdriver did you use? I have a really small one but I am unsure whether it will work with this one or not. Also, did you only use one screwdriver throughout was hard to tell.
This repair was for a focus problem. It would have been really good to see the effect of the focus before and after the repair. When mine is at maximum zoom, the focus is very slightly off. Is that what you had, or was it not focusing at all?
The tiny #0 Phillips-head screwdriver was not hard to find, but there's another tool you're using to poke at the tiny catches (with a point on one end) and remove the ribbon-cable connectors (with a flat on the other). It seems to be made of plastic and also has some very specific-looking notches. What is it called and where can it be obtained? Or what can be used in its place? Thank you for a very detailed video that gets right to the point without excessive introduction or chatter!
hola amigo hoy 26/08/2017 fui a encender mi camara fujiflin jx580 y estaba en blanco la pantalla y el zoom retraido de tanto buscar videos no consegui nada le coloque el video a mi esposo y agarro la camara como dijiste y en la palma de la mano le dio tres golpes mas o menos fuerte y me abrio todo esta como nueva jajajaja mas contenta muchas gracias por tu video
it is a lot of detail , how many times you have to dis mental the camera to put it back so smooth :) ? I have the same tz 10 i will not dis mental it like that , will not be able to put it back :) My lens is dirty ( have seen the clean up video) .
Hi there, can you tell me what size screwdriver you used? I just bought the TINIEST one ever (it's #0) and it's still not catching the baby screws. Don't know how to open it! :(
I followed your instruction and fixed the focus problem. You saved my DMC-TZ20 camera.
Thank You !!!
+János Kajtár You welcome. Thank you. Now i must look to another problem with this camera, LCD screen don't work. Everything else (photo, focus, etc...) is functional.
+{78b39062af45ec} I wish you good luck.
@@78b39062af45ec what screwdriver did you use? I have a really small one but I am unsure whether it will work with this one or not. Also, did you only use one screwdriver throughout was hard to tell.
Wow! You are a craftsman. Nice.
This repair was for a focus problem. It would have been really good to see the effect of the focus before and after the repair.
When mine is at maximum zoom, the focus is very slightly off. Is that what you had, or was it not focusing at all?
Ottimo video è stato utilissimo per riparare lo zoom della mia fotocamera Lumix TZ8. Grazie!!!!
Ciao, mi puoi spiegare esattamente cosa hai fatto? Perchè lui ha aperto, mosso le rotelline dello zoom, e richiuso. Mi sembra un po a caso...
The tiny #0 Phillips-head screwdriver was not hard to find, but there's another tool you're using to poke at the tiny catches (with a point on one end) and remove the ribbon-cable connectors (with a flat on the other). It seems to be made of plastic and also has some very specific-looking notches.
What is it called and where can it be obtained? Or what can be used in its place?
Thank you for a very detailed video that gets right to the point without excessive introduction or chatter!
i think you looking for this:
uk.farnell.com/3m/sp3010/tool-soldering-glass-filled-nylon/dp/2135912
very clear guidance ,thank you.
hola amigo hoy 26/08/2017 fui a encender mi camara fujiflin jx580 y estaba en blanco la pantalla y el zoom retraido de tanto buscar videos no consegui nada le coloque el video a mi esposo y agarro la camara como dijiste y en la palma de la mano le dio tres golpes mas o menos fuerte y me abrio todo esta como nueva jajajaja mas contenta muchas gracias por tu video
My LX100 lenses is just locked! even without the motor and gear, thats this? maybe another motor inside?
THANKS YOUR VIDIO,,,AMAZING
Nice overview. Did not see actualcleaning and lubrication of the cilinders and windows at front.
it is a lot of detail , how many times you have to dis mental the camera to put it back so smooth :) ? I have the same tz 10 i will not dis mental it like that , will not be able to put it back :) My lens is dirty ( have seen the clean up video) .
The side screws will not turn! I removed the bottom screws no problem.
THANK YOU!
Hello can you fix (error focus) my DMC-T71? Thank you
Hi there, can you tell me what size screwdriver you used? I just bought the TINIEST one ever (it's #0) and it's still not catching the baby screws. Don't know how to open it! :(
Hi, it's PH000 size.
LOL at first I thought it was actually the name. But you mean PH #000 right? Thanks :)
Yes, sorry for bad typo :)
haha no problem, thanks =o)
does this work with newer models?
Is there a problem on my computer's audio?
See!!! I told you!!!!
I thought my computer sound was gone bad.
supi
In n