Budget Chevy Nova Subframe Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • Rebuilding the subframe for the $5000 Chevy Nova build
    Body Bushing Kit. amzn.to/392oNk4

ความคิดเห็น • 90

  • @clunkersandclassics
    @clunkersandclassics 2 ปีที่แล้ว +7

    Welcome back! Finished mine about a month ago, Have $5200 in it, running, driving and painted up, ready to go.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +3

      Hell yeah! Good deal! I’d be in it a lot cheaper if I had just bought used engine and transmission and just trusted that they worked.

  • @kennymack8056
    @kennymack8056 2 ปีที่แล้ว +3

    Just getting ready to do this to my 69. Thanks for the video.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +2

      Cool!

    • @mikehoxbig1866
      @mikehoxbig1866 2 ปีที่แล้ว +1

      check out Godsy Garage hes doing a pretty cool Nova build too

  • @justincooper5189
    @justincooper5189 2 ปีที่แล้ว +2

    I'm glad to see someone else who is dealing with a novas front frame section. I want to get a Nova of my own, but I'm a bit rusty on some of the more technical stuff on these, so like I said, glad to see someone working on one of these beasts.

    • @mikehoxbig1866
      @mikehoxbig1866 2 ปีที่แล้ว

      Godsy Garage is Doing a pretty cool nova build too

  • @donaldgray8864
    @donaldgray8864 2 ปีที่แล้ว +1

    Good to see you back out in the shop

    • @Shop209
      @Shop209  2 ปีที่แล้ว +2

      Thanks! I’m glad work caught up so I could do some stuff.

  • @rickyking3333
    @rickyking3333 2 ปีที่แล้ว

    Reading some the comments. Y’all way ahead of me I’m just starting on my 68.

    • @mikehoxbig1866
      @mikehoxbig1866 2 ปีที่แล้ว

      check out Godsy Garage hes building a 74/69Nova build

  • @StewsChannel
    @StewsChannel ปีที่แล้ว

    Just found your channel, really enjoying the content! 👍

  • @boatnut64
    @boatnut64 2 ปีที่แล้ว +1

    Thank you very much, for the very timely video... I was planning on pulling the sub frame off my '72 Nova, tomorrow... 👍👍👍 I was concerned about how to get it aligned with the body, when I put it back in, sooo, amazing timing.
    Thanks again, and keep up the Great Work.
    Allan 💪💪💪

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Cool! No problem at all

  • @1Also
    @1Also 2 ปีที่แล้ว +1

    Been wondering where you been….hope all is well…and the Mountain is Dewless!
    👍Mr. Ronnie!

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      I’m good. Just been stupid busy

    • @1Also
      @1Also 2 ปีที่แล้ว +1

      @@Shop209 join us on @Nobodys Show it’s Live right now…take a break

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Ok

  • @mikehoxbig1866
    @mikehoxbig1866 2 ปีที่แล้ว +1

    Godsy Garage is doing a pretty Cool Nova build too

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      I’ll check it out

  • @ThanenJ
    @ThanenJ 2 ปีที่แล้ว

    Been working my way through your videos. They are helping me to stay motivated. I'll be coming back through to rewatch when it's my time. Thanks for posting these!

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Thanks for watching!!

    • @ThanenJ
      @ThanenJ ปีที่แล้ว

      @@Shop209
      I'm starting this now. 👍
      I have everything off of the subframe so I figured I would pull it off and clean it up to make sure there's nothing worrisome hiding.

  • @johnholliday8029
    @johnholliday8029 ปีที่แล้ว

    Enjoy your videos. Currently doing a 1973 out here in west Georgia.

    • @Shop209
      @Shop209  ปีที่แล้ว +1

      Lagrange/Columbus area?

    • @johnholliday8029
      @johnholliday8029 ปีที่แล้ว

      @@Shop209 east of Columbus in speck on the map called Geneva. Got a lot of work ahead on mine. Don't know many around me working novas to see in person so I watch your handy work. Had an exciting time getting a arms and springs out yesterday, ha.

  • @dennissmith8199
    @dennissmith8199 10 หลายเดือนก่อน

    John, I have what looks like the same spring compressor you have, and I used it a different way that also worked pretty well. I put the threaded end inside the sprin so it was pointed up, put the spring in place in the subframe, then put a couple greased up washers on the threaded rod, dropped it down through the shock hole and threaded it into the threaded piece. Then I just screwed the rod into the lower piece and compressed the spring until I could get the lower A-arm up far enought the get the knuckle atttached. Hope I explained it so you could understand. Using this method, I only had to fish one piece out of the spring.
    Great video!

    • @Shop209
      @Shop209  10 หลายเดือนก่อน

      That’s a great idea. I’ll have to try that. Thanks!!

  • @after5auto133
    @after5auto133 2 ปีที่แล้ว

    Hey John, good to see you back in your shop. I know you been busy

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Thanks! I’ll be coming to see you soon.

  • @TonyGeneseo
    @TonyGeneseo 2 ปีที่แล้ว +1

    Great video John ! Really appreciate the way you explain things as you go ! Inner/outer longer/ shorter etc. Got my 70 out of storage end of last week and staring at it now. Lol cheers to warmer weather and cruising in a Nova ! 🍺🍺 take care bud

    • @Shop209
      @Shop209  2 ปีที่แล้ว +2

      Thanks Tony! It’s already been 90 here a couple times. Gonna get hot soon.

    • @TonyGeneseo
      @TonyGeneseo 2 ปีที่แล้ว

      @@Shop209 gotta love that Georgia heat ! My ex wife is from Stone Mountain and had been down several times to visit. That kinda heat for a Maine boy is just crazy ! Lol. 70 here today and trees are budding out. And we get upper 90’s with humidity here but that Georgia heat is just different.

    • @mikehoxbig1866
      @mikehoxbig1866 2 ปีที่แล้ว +1

      check out Godsy Garage hes doing a Nova too

    • @TonyGeneseo
      @TonyGeneseo 2 ปีที่แล้ว

      @@mikehoxbig1866 thanks Mike. I will for sure. Hatch recreation is doing some cool stuff too ! Rally like how John does his videos ! Big fan !

  • @obsessivegarage921
    @obsessivegarage921 2 ปีที่แล้ว +1

    Hey John! Glad you posted another video. We've all been busy right before summer! Thx for your advice on the long tube headers the other week, I'll be swapping the inline 6 with the 350 this weekend! Hope everything goes smoothly haha wish me luck! 😁

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Thanks Zak!

  • @popsshop1270
    @popsshop1270 2 ปีที่แล้ว

    Looking good, I just finished doing all this on my 69. I just got the new fenders and new hood on and aligned and that is a pain in the butt. Keep the videos coming.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Thanks!

  • @scottwilkerson78
    @scottwilkerson78 2 ปีที่แล้ว

    Hey Man, I'm about to start rebuilding a 68 chevy 2. Love the videos. They are really gonna help me with my build.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Thanks! I have more coming.

  • @itseithergonnaworkoritaint7852
    @itseithergonnaworkoritaint7852 2 ปีที่แล้ว

    This was awesome, you are a one man crew! The only thing that would of made this video better is if you had a camera guy. You made that look so easy it makes me want to go and work on my junk, good job.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Thanks! Yeah. I wish I could do better camera work.

    • @itseithergonnaworkoritaint7852
      @itseithergonnaworkoritaint7852 2 ปีที่แล้ว

      @@Shop209
      Just keep doing good videos like this one and eventually you'll be able to pay a camera guy?

  • @lordsauto
    @lordsauto 2 ปีที่แล้ว

    Missed ya bud!! Great video 📹

  • @tekk688
    @tekk688 2 ปีที่แล้ว

    Great job

  • @SurlyMike
    @SurlyMike 2 ปีที่แล้ว

    Man I've missed seeing you post. Are you putting drum brakes back on the front? I saw some big block heads in the background. Keep sharing man, we'll keep watching.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Yep. Going back with drums on front. The big block heads are for another project.

  • @novadiecastman5251
    @novadiecastman5251 2 ปีที่แล้ว

    John how ya been ?? Getting ready to get back to mine !! Have to put upper ball joints on my 73 . Oh it's Jeff by the way ..

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Hey Jeff! I’m doing great. The upper joints are the easy ones.

    • @mikehoxbig1866
      @mikehoxbig1866 2 ปีที่แล้ว +1

      check out Godsy Garage hes doing a pretty cool 74 Nova build

  • @2old2rodeo
    @2old2rodeo 2 ปีที่แล้ว

    You might consider a raffle as opposed to selling. Seems like some guys do pretty well with those. Thanks for the video.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Raffles in Georgia are seriously regulated. Have to have permit and all kinds of stuff. Not a bad idea though.

    • @itseithergonnaworkoritaint7852
      @itseithergonnaworkoritaint7852 2 ปีที่แล้ว

      @@Shop209
      A way around that is a contest drawing with one chance for every $5.00 they spend on merchandise bought but you would have to start selling merch first. That's the way around those pesky regulations because you're not selling lottery tickets, you're selling tee shirts, hoodies, sweat shirts, stickers and such and the contest is just a bonus for someone buying merch anyway.
      So even if someone doesn't win they still get a tee shirt, key chain or something they buy. But to be safe, make sure there are no contest regulations that they can come after you with. In other words call a lawyer to confirm to cover your but.
      Grind Hard Plumbing Company yt channel did that with a few items but I think they're in Montana so...?

  • @MrYz250fman
    @MrYz250fman 2 ปีที่แล้ว

    Coming along

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      Getting there!

  • @hippiemiller
    @hippiemiller 2 ปีที่แล้ว

    👍👍

  • @justincooper5189
    @justincooper5189 2 ปีที่แล้ว

    The steering box made me wonder if there is a mounting difference between the manual steering box, and the power steering box. Also curious why you're installing drum brakes, when disc brakes are more simple in both installation and operating. Is there a difference in radiator braces for the different years of Nova and the different engines? I've heard there is, but since you have so many of these cars, I figured I'd ask because of that knowledge.

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      The steering box mounts the same if it’s manual or power. The pitman arm is specific. I’m running drum breaks because when this project started I bought all new drum brake parts. Knowing that discs would be more expensive and harder to find a deal on. The radiator support did change some between engines. There’s a big block specific radiator support and also one for HD cooling on 73/74. Then the standard one and maybe another variation. Thanks!

  • @ALPHAFTUCK
    @ALPHAFTUCK 2 ปีที่แล้ว +1

    I have my '74 Hatchback still, which was my first car. restoring it... but having a tough time finding replacement rear quarter panel's and replacement front fenders here in Alberta Canada. Would you know of any options for a Canuck in need? thx Rick

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Honestly, NOS quarters are your best bet if you need the whole quarter. If you just need patches, maybe Amazon because of shipping deals. I’m not certain how bad the shipping and exchange rate hurts you guys up north.

    • @ALPHAFTUCK
      @ALPHAFTUCK 2 ปีที่แล้ว +1

      Perfect thank you! Exchange rates, and shipping is insane this way, but it is what it is. thx again. Great Channel 👍

  • @silverado21hg5
    @silverado21hg5 2 ปีที่แล้ว +1

    Quick question. I’m new to the nova family and I curious is the 4 door sedan frame same at the 2 door nova because my frame looks it was wrecked at some point and would prefer to replace with a better one.

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Yes. The front subframe is the same for both.

  • @vincentmadera8159
    @vincentmadera8159 4 หลายเดือนก่อน

    Do you have video installing trunk torque bar?

  • @denniscornish7052
    @denniscornish7052 2 ปีที่แล้ว +1

    Is the spline count on the steering box where the rag joint connects the same for all the Nova's?

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      At least for all the 68-74 I think are the same.

    • @denniscornish7052
      @denniscornish7052 2 ปีที่แล้ว

      @@Shop209 thank you.

  • @crashnburn3980
    @crashnburn3980 ปีที่แล้ว

    I need to check and see if I have the spacer or not on the front bushing i installed energy suspension bushings in mine and didnt know about the spacer

    • @Shop209
      @Shop209  ปีที่แล้ว +1

      Yeah. Your fenders won’t line up correctly if it’s missing

    • @crashnburn3980
      @crashnburn3980 ปีที่แล้ว

      @Shop209 I will have to find the measurement for the total height of the front bushing and spacing together and check

  • @dlace2316
    @dlace2316 2 ปีที่แล้ว +1

    Any advice on an 73 Nova trunk pan ,can seem to find any thing, it's the left side in the middle is where I'm having the rust issue Thanks in Advance

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      I have used part of a 72 pan to patch the drivers side of a 73 trunk. From about the middle to the left side the trunk pans are pretty much the same. The right side is different because of the larger tank

    • @dlace2316
      @dlace2316 2 ปีที่แล้ว

      @@Shop209 thanks a million

    • @mikehoxbig1866
      @mikehoxbig1866 2 ปีที่แล้ว

      check Out Godsy Garage hes doing a 74 Nova build thats pretty cool

    • @dlace2316
      @dlace2316 2 ปีที่แล้ว

      @@mikehoxbig1866 OK Thanks for the heads-up

  • @ShawnMalmgren
    @ShawnMalmgren 7 หลายเดือนก่อน

    Installing new sub frame in 77 nova and don't know if it had spacers. Does the 77 use spacers

    • @Shop209
      @Shop209  7 หลายเดือนก่อน

      As far as I know there were no spacers after 1972

  • @carpartsink4577
    @carpartsink4577 2 ปีที่แล้ว

    On original subframe bolts would you manually remove them or use power tools?

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      I would spray a bunch of PB blaster on nut, let it sit and use impact.

  • @mopster1913
    @mopster1913 ปีที่แล้ว

    I have a 73 apollo, can i pull oil pan out without dropping subframe?

    • @Shop209
      @Shop209  ปีที่แล้ว +1

      Seriously doubt it.

  • @infamousnova
    @infamousnova 2 ปีที่แล้ว

    For some reason my subframe bolt underneath the car catches a few threads then wobbles. How do I get to the nut or clip that in the body?

    • @Shop209
      @Shop209  2 ปีที่แล้ว +1

      Which one? Under seat or at firewall? You trying to get it out or put it in?

    • @infamousnova
      @infamousnova 2 ปีที่แล้ว

      @@Shop209 under seat

    • @infamousnova
      @infamousnova 2 ปีที่แล้ว

      @@Shop209 so what's the best way to get to the top of the nut.

  • @MegaRusty1973
    @MegaRusty1973 2 ปีที่แล้ว

    Hey buddy

  • @unchained20000000
    @unchained20000000 2 ปีที่แล้ว

  • @polishedturdspeedshop
    @polishedturdspeedshop 2 ปีที่แล้ว +1

    Hit me up when its for sale!! :)

    • @Shop209
      @Shop209  2 ปีที่แล้ว

      I’ll post when it’s done.