Just keep making tutorials of Davinci Resolve, please. Your didathic is awesome, better than 99% of youtubers. They don't know how to teach, you deffinitely know. Keep making, subscribed.
Coming through with the Tutorial is Dope bro. Awesome Wobble fx and definitely will be implementing this. Also, would love to know some of your other macros that you use that you feel are powerful.
appreciate you big homie, I'm thinking about putting out a little set of them that I use a lot for ya'll to download. In general tho, anytime you create something in fusion that you feel you might use again, it's not bad practice to save it. Like for instance I have one that will transform something left to right, and top to bottom, or one that will "pop in" an image or text. And you can group as many nodes as you like, doesn't have to be just one transform node.
I'd recommend checking out Magic Animate from Mr. Alex Tech! It's a great tool for animating images; otherwise, yes you would need to copy and paste your fusion composition and swap out the image
Mr wampus, I want to create a looping video in which several pngs continuously move upwards with random size adjustments. Can you give me some ideas when you have time?
hmmm, I'm not 100p sure what you're going for, but there's a couple tools that could probably help you. If you want random size adjustments of the same png or image, use the "Duplicate" node. There should be a Jitter tab where you can change the size slider. This will vary the size of the copies of your pngs. There are a couple ways you could loop it going upwards. The first would be to just loop the animation. Set your two key frames from top to bottom, then go to your spline tool, select your two key frames and then there will be a "Loop" option on the bottom toolbar. Something else you could look into, is that most nodes that create motion (i.e. transform, merge) have a property called "Edge Behavior". If you change this to "Wrap", your images will wrap from top to bottom. Hope that helped!
That is something I did in the Fusion page. A better solution is to use MrAlexTech's "Magic Animate" tool. It's completely free and does a lot of great animations
Just use camera shake dude,apply it In fusion to whatever you want adjust it however you want and that's it you'll get the same effect even better, smoother and faster
You definitely can! Depending on the camera shake node it can either be a bit limiting or too much imo, but it works just as well. I just found this to work best for me and good practice for creating macros
Hi Wampus, love the videos. I am beginning to use DaVinci to edit gameplay footage. Is there anything in the paid version that is of good use to editing gameplay? Cheers!
I would stick with the Free version. There are a lot of great features in the Studio version, but if you're just starting out, you probably won't need any of those for a while. Everything that you would need for editing gameplays is in the free version. The Studio version will unlock a couple of FX and some quality of life things like GPU rendering. If you stick with DaVinci long enough, you'll realize what those features are and whether or not it's worth it to you. Appreciate you checking out the videos
Hi!! Thanks so much for your content. It is very helpfull. You are awesome explaining🎉. I would like to ask you if you could do a tutorial on how to create a macro or "install" one on davinci but on iPad version. I have tried but unfortunately I hadn't be able to achieve it 😞. Thanks in advance😊
Thank you for the kind words! Unfortunately, I'm not sure if you can on the iPad version. I know there are already some features that are limited, but Blackmagic Desigin has a discord that might be able to answer your question: discord.gg/jt69hKWs
Just keep making tutorials of Davinci Resolve, please. Your didathic is awesome, better than 99% of youtubers. They don't know how to teach, you deffinitely know. Keep making, subscribed.
The best video I have seen so far on the topic.
Your pedagogical prowess is truly exemplary, illuminating the path of knowledge with an unmatched finesse.
LMAO who is this
Great tutorial for both how to create a wobble and how to create a macro. You should add the macro part to your description and title.
thats a great tutorial right here , keep up the good work
Hell yeah brother, thanks for this! Been looking for another way to do the wiggle effect from AE.
Coming through with the Tutorial is Dope bro. Awesome Wobble fx and definitely will be implementing this.
Also, would love to know some of your other macros that you use that you feel are powerful.
appreciate you big homie, I'm thinking about putting out a little set of them that I use a lot for ya'll to download. In general tho, anytime you create something in fusion that you feel you might use again, it's not bad practice to save it.
Like for instance I have one that will transform something left to right, and top to bottom, or one that will "pop in" an image or text. And you can group as many nodes as you like, doesn't have to be just one transform node.
@@itstheWampus see that’s the sauce I need to get into right there.
YES. I have been looking for this
Love your content man🔥
This is a great effect, but what I really got out of it was how to setup a new macro. Thanks for sharing this!
omg this content is insane
Dude this was awesome! I'm going to try this out :)
New avi is 🔥
THANKS
Legendary!!! Thankyou Bro
Exactly what I was looking fo. Thanks you
how do you get the control panel to show up in the Modifier tab? its empty for me
thank you so much, helped me out a tonne : )
good tutorial. one question... how i can apply this in several pngs in the timeline? i need to do all over in the fusion tab?
I'd recommend checking out Magic Animate from Mr. Alex Tech! It's a great tool for animating images; otherwise, yes you would need to copy and paste your fusion composition and swap out the image
That mustache is looking STRONG
time for bed little man
Hey can you teach how to wobble the camera and pan it around when doing a screen recording?
Just used this... THOUGHT YOU SHOULD KNOW
cap
Mr wampus, I want to create a looping video in which several pngs continuously move upwards with random size adjustments. Can you give me some ideas when you have time?
hmmm, I'm not 100p sure what you're going for, but there's a couple tools that could probably help you.
If you want random size adjustments of the same png or image, use the "Duplicate" node. There should be a Jitter tab where you can change the size slider. This will vary the size of the copies of your pngs.
There are a couple ways you could loop it going upwards. The first would be to just loop the animation. Set your two key frames from top to bottom, then go to your spline tool, select your two key frames and then there will be a "Loop" option on the bottom toolbar.
Something else you could look into, is that most nodes that create motion (i.e. transform, merge) have a property called "Edge Behavior". If you change this to "Wrap", your images will wrap from top to bottom.
Hope that helped!
I can't wait to use this. Thank you!
your end screens are not appearing
I really like the wobble node. It makes everything appear alive! Any chance you could upload the macro onto a cloud drive so we can download?
Could be a thing, I was thinking about compiling a few of them for you all to use
That would be amazing.
I would love that.@@itstheWampus
Good video , but when I get to the stage to save I don't have the three dots , any idea what I can do , thanks 👍
If you don't see the 3 dots, there should be a "File" button in the top left corner!
How can I make the transition you made with your face at the beginning of the video?
That is something I did in the Fusion page. A better solution is to use MrAlexTech's "Magic Animate" tool. It's completely free and does a lot of great animations
@@itstheWampus u use anim curves or you do it manually with a transform node? I comment in another video with that transition
I'm sorry I just saw your response. Most of the time I do it manually with a transform node. Although, I probably should start using Anim curves more
I made something like this in ae
THANK YOU SO MUCH!
wobble tutorial? is this video editing or music production?
when i try it it just moves to the right
Finna watch all of your videos so that i can master my Editing and crank out good content again
I've searched for hours for this tutorial thank you so much hahah
Thank you very much! I needed this!
Just use camera shake dude,apply it In fusion to whatever you want adjust it however you want and that's it you'll get the same effect even better, smoother and faster
You definitely can! Depending on the camera shake node it can either be a bit limiting or too much imo, but it works just as well. I just found this to work best for me and good practice for creating macros
damn this 500$ editing course kinda good
Hi Wampus, love the videos. I am beginning to use DaVinci to edit gameplay footage. Is there anything in the paid version that is of good use to editing gameplay? Cheers!
I would stick with the Free version. There are a lot of great features in the Studio version, but if you're just starting out, you probably won't need any of those for a while. Everything that you would need for editing gameplays is in the free version.
The Studio version will unlock a couple of FX and some quality of life things like GPU rendering. If you stick with DaVinci long enough, you'll realize what those features are and whether or not it's worth it to you.
Appreciate you checking out the videos
Appreciate you! @@itstheWampus
Thank you. You're an absolute natural at making tutorials and your character makes them really interesting to watch too!
that is extremely kind, thank you
Hi!! Thanks so much for your content. It is very helpfull. You are awesome explaining🎉. I would like to ask you if you could do a tutorial on how to create a macro or "install" one on davinci but on iPad version. I have tried but unfortunately I hadn't be able to achieve it 😞. Thanks in advance😊
Thank you for the kind words! Unfortunately, I'm not sure if you can on the iPad version. I know there are already some features that are limited, but Blackmagic Desigin has a discord that might be able to answer your question: discord.gg/jt69hKWs
@@itstheWampus thanks for the answer 😄. Keep going doing these tutorial, you help me a lot 🙏🏼