Just some helpful tips to improve gearing 1.Make sure the gears are same pitch. 2.The mesh sounds too tight. One way to get the perfect spacing in between the gears is by using a small piece of paper and lodging it in between the spur and pinion before tightening. I usually use printing paper or a sticky note and then fold it upon itself to give the mesh some more room to breathe. Ive been doing this for years and haven’t stripped a spur since (also cooler motor and faster speeds). Best of luck to you
Sweet upload man. I am impressed you broke 80 with the stock chassis/suspension and even the full sized spoiler. Yours is the steadiest over 50 I have seen on the modded megas. Congrats 👏 . I liked the bigger tires in your previous video for slow speeds with the infraction mega. Pure grit putting the fresh body shell on for those speeds.
@@boaboynyc1 yeah I went with the 57t metal for now, running mine on 4s when I get it all together. Mmx/2650kv. If the 50t drops I’ll def buy it as well to throw in. I think I have a 24 or 26t pinion to throw in, but it may still be a little slow
@@calebgilmore3327 well if u think that'll be slow try the 34t pinion and shave out the housing just a tad and omg.. im actually going to get another one today just to make 2 of em. 50t spur plastic for now and the 34t pinion
Yup, I wanna be like you when I grow up😆 Awesome channel! I’ve got a Granite that’s basically stock, a Big Rock that’s running Arrma Felony 6s motor and Esc and I just got my Infraction Mega last night. Got the Blx185 and Spectrum 2050kv motor installed over night. Fresh charged 6s just Waiting for sunrise so I can hit the streets and see what she’ll do. Great channel, keep it up🤘🤘
Awesome video. I was thinking about getting that infraction for my son because out of the box would be good for him and we can modify it as he gets better. I have a vendetta, interested in your motor and esc set up, you for sure need steel gears now, haha.
Thanks! The infraction would be great for that. In this video I'm running the Castle Creations 1/8 Sidewinder motor/ESC combo. And definitely could use some steel gears haha
S7 is only good in very very hot states in all honesty the softer the better no matter the weather the lower numbers as there softer will wear easier but unless it’s extremely hot out S7 will not give much traction looks pretty chilly there you’ll probably be better off with s1-s4
Got a quick question, need a little help, i got the vendetta and looking for a center brace set up, do you know what would fit . I know something would work, i just don’t know what would. Thanks like your content😉👍🏼😉
Thanks! Sorry I don't have an answer for ya.... I'm not quite sure what you mean for center brace setup? Vendetta already comes with the driveshaft high speed support. If like a chassis brace I don't really know. Might have to experiment a little.
Finally somebody painted the wing every video I see it's clear... Looks awesome...wth damn dude that thing sounded so nice on second run on 6s 81 mph shit... Are those stock diffs?? I'm subbed for more man thanks for great video
Im a bit confuse because I have the new 3s infraction and it does 70 plus with that same setup on 3s wondering why you only hit 50 at most on 3s With the same setup as the vendetta ?
Hi guys!, the difference is that sketch is running a much lower kv motor than the high kv on the stock 3s infraction/vendetta.. Hey sketch, purchase the HotRacing arrma 3s motor mount which has a little more room for bigger pinions, or just Dremel a little more room on the stock one.. Hope to see you soon.
@@DoRC Right or wrong is all opinion. Just a fun hobby. Worked for what I needed, would have been metal if they made one. But they don't yet. For the 40T that is.
@@SketchRC- oh no I wasn't saying that you shouldn't have done it I was just saying that when you push that kind of power through a plastic spur it's probably going to strip eventually
Metals slipper clutch broman 57t and cut a Lil hole in the gearbox for a bigger pinion metal ring diff gears and metal input gears u can also upgrade the center shaft to an aluminum one u have my sub bro check my vendetta before I turn it into a 6s monster 👍
Just some helpful tips to improve gearing
1.Make sure the gears are same pitch. 2.The mesh sounds too tight. One way to get the perfect spacing in between the gears is by using a small piece of paper and lodging it in between the spur and pinion before tightening. I usually use printing paper or a sticky note and then fold it upon itself to give the mesh some more room to breathe. Ive been doing this for years and haven’t stripped a spur since (also cooler motor and faster speeds). Best of luck to you
Sweet upload man. I am impressed you broke 80 with the stock chassis/suspension and even the full sized spoiler. Yours is the steadiest over 50 I have seen on the modded megas. Congrats 👏 . I liked the bigger tires in your previous video for slow speeds with the infraction mega. Pure grit putting the fresh body shell on for those speeds.
Thanks! Really appreciate the kind words!
Dude I just got one of these and I can’t wait to boost it with these up grades. Thanks for the massive info.
Motivation! Thank you for the information you provided! Keep them coming!
I've been building mine up for a little while now and never thought to put it on 6s until now. Awesome video. Perfect run location..
Definitely could use a steel spur but worth it. Thanks Man!
@@SketchRC- they have em in 57t brother. Slows it down but we're patiently waiting for the 50t metal.
@@boaboynyc1 yeah I went with the 57t metal for now, running mine on 4s when I get it all together. Mmx/2650kv. If the 50t drops I’ll def buy it as well to throw in. I think I have a 24 or 26t pinion to throw in, but it may still be a little slow
@@calebgilmore3327 well if u think that'll be slow try the 34t pinion and shave out the housing just a tad and omg.. im actually going to get another one today just to make 2 of em. 50t spur plastic for now and the 34t pinion
@@boaboynyc1 I’m throwing an m2c plate in it, it may fit hahahaha
Yup, I wanna be like you when I grow up😆 Awesome channel! I’ve got a Granite that’s basically stock, a Big Rock that’s running Arrma Felony 6s motor and Esc and I just got my Infraction Mega last night. Got the Blx185 and Spectrum 2050kv motor installed over night. Fresh charged 6s just Waiting for sunrise so I can hit the streets and see what she’ll do.
Great channel, keep it up🤘🤘
That's awesome! And thanks, appreciate the encouragement!
Enjoyed the vid! 🤘🏻
Thanks!
81mph is fast awesome runs
Heck yeah it is. And some people get 100 plus. Someday maybe 😆
First time seeing this video, you gotta trim the tail wing down some . Air holding it back
Awesome run man. I did a video with the same setup but I got steel 57t gear and the exb 3s steel diffs. It definitely helps! Subbed
Awesome video. I was thinking about getting that infraction for my son because out of the box would be good for him and we can modify it as he gets better. I have a vendetta, interested in your motor and esc set up, you for sure need steel gears now, haha.
Thanks! The infraction would be great for that. In this video I'm running the Castle Creations 1/8 Sidewinder motor/ESC combo. And definitely could use some steel gears haha
Very cool congrats
Thanks Man!
Im surprised no Blx motor mount with the motor spool!
I'm no professional lol
Maybe use the blx motor mount with the aluminum maybe the motor is moving in the plastic motor mount
That's awesome steel gear ⚙ 👏
Soon! And thanks!
Ok, great runs and driving. Truck was planted, need metal spur, and adjust steering, but i think you will hit 100mph.
Thanks, I'm hoping to get back into some speed stuff again soon!
Your hooked!
Lol yes line and sinker
Sweet dude really sweet
Thanks!
Great run man.
BAD ASS!!!!! LOVE THE SET UP BRO!!!
Thanks Man!
Bro..I subscribed and been watching video after video and they are all AWESOME!! KEEP UP THE GREAT CONTENT!!!🤘🤘🤘🤘
@@jasontosspon817 I really appreciate that. I don't plan on stopping but your comment and those alike definitely fuel the desire to keep going.
jennysrc has vendetta parts now, you just have to catch the body in stock. they sold 4 already
Some grps s7s. Upgraded metal spur and slipper and you should be good for near 100.
S7 is only good in very very hot states in all honesty the softer the better no matter the weather the lower numbers as there softer will wear easier but unless it’s extremely hot out S7 will not give much traction looks pretty chilly there you’ll probably be better off with s1-s4
@@Trumpethon its hot and humid here in louisiana most of the year. So thats what I run.
Looking good 👍.
I’m doing this with a castle 1515 so hoping I get some tips from your channel
Nice! I'm not sure about tips, I don't really know what I'm doing lol just having fun
F@$€ yeah, F@$€ YEAH!!!
thats simply superb. :)
Thanks!
nice flannel homie n sick rig and nf is dope
Best comment yet lol
great Job bro. those passes were awesome. 👍🏼👍🏼💪🏽💪🏽💯💯
Appreciate it!
Got a quick question, need a little help, i got the vendetta and looking for a center brace set up, do you know what would fit . I know something would work, i just don’t know what would. Thanks like your content😉👍🏼😉
Thanks! Sorry I don't have an answer for ya.... I'm not quite sure what you mean for center brace setup? Vendetta already comes with the driveshaft high speed support. If like a chassis brace I don't really know. Might have to experiment a little.
@@SketchRC- yes the chassis brace,
I just did this swap what’s a good metal spur gear that would fit
Awesome dude😀
Thanks!
Finally somebody painted the wing every video I see it's clear... Looks awesome...wth damn dude that thing sounded so nice on second run on 6s 81 mph shit... Are those stock diffs?? I'm subbed for more man thanks for great video
Thanks for the nice comment! Yes stock diffs and no damage to em.
I painted mine you can see it on my channel supposed to be a color changing chameleon didnt work as planned still looks cool I think :)
What gearing do you have ?
Nice spot... what's your location? Looks like an NC highway. Also as previously stated add that 57T steel HD spur 👍🏽
Tennessee! And I'll order and use for next speed run. Thanks
You have to change your spur to the blx spur
METAL SLIPPER CLUTCH NEXT TIME AND DONT FORGET TO UPGRADE THE RING DIFF AND INPUT GEARS TO METAL AS WELL THEN SEE THE DIFFERENCE
Do a 39 spur 26 pinion
What motor is that? Nice run by the way.
Thanks! It's a castle Creations 1515B-2200Kv motor.
Im a bit confuse because I have the new 3s infraction and it does 70 plus with that same setup on 3s wondering why you only hit 50 at most on 3s With the same setup as the vendetta ?
No idea man. I can't really remember but maybe I had different gearing..?
Hi guys!, the difference is that sketch is running a much lower kv motor than the high kv on the stock 3s infraction/vendetta.. Hey sketch, purchase the HotRacing arrma 3s motor mount which has a little more room for bigger pinions, or just Dremel a little more room on the stock one.. Hope to see you soon.
Did you upgrade the diffs? It kept em stock?
Stock diffs
I need that rear wing
You need an aluminum motor plate homie
I need to Get Back in the speed Game!! haha
Castle 1515 the motor?
Yes 2200KV
Based on what was left of those teeth on the stripped gear I don't think you had your mesh to loose.
Yeah something wasn't right haha
@@SketchRC- I'm pretty sure what wasn't right was 6s on a plastic spur :-)
@@DoRC Right or wrong is all opinion. Just a fun hobby. Worked for what I needed, would have been metal if they made one. But they don't yet. For the 40T that is.
@@SketchRC- oh no I wasn't saying that you shouldn't have done it I was just saying that when you push that kind of power through a plastic spur it's probably going to strip eventually
@@DoRC My bad man, I hear ya. Didn't mean to come off as a jerk there haha
That rear wing has got to be slowing you down
I never considered that..guess it's more a parachute then a wing haha.
@@SketchRC- definitely. That Wing is not designed for speed runs
Reckon that's catching buckets of air.. More like an air brake when uncut.
Sweet
Thanks Man!
Stock diffs?
Yes
Great video brotha!! What were the temps like after those runs??
Thanks! They weren't bad. I could leave hand on motor/ESC at all times. Never to hot to touch or hold. I have a temp gun...just always forget it!
Metals slipper clutch broman 57t and cut a Lil hole in the gearbox for a bigger pinion metal ring diff gears and metal input gears u can also upgrade the center shaft to an aluminum one u have my sub bro check my vendetta before I turn it into a 6s monster 👍
Mod 1
People are getting 100 with the vendetta on 4s,
That's crazy, yeah I don't really know what I'm doing. Just a dude enjoying the hobby lol
This look like nc
Tennessee!
Gear
Hollyn balls
🤣
Steal spur gear ⚙️ man
I know, I was just wanting to use the vendetta spur and maybe they make a steel one by now? Not sure
Hey I need your fb I would love to talk to you about that infraction conversation