man i was thinking about this project and been tired for couple days try to figure out the program, until i saw yr channel and this project , Thanks a lot Bhai, frm Malaysia, i hv subscribe and like
when you started the simulation , why did you remove the wire that links the power supply and the light bulb and then put it back on ? and how did you even do that because i can't modify the circuit while the simulation is still running
as soon as I start the simulation my Power Supply goes to 0 A (second screen on the power supply), no matter to what voltage I put it on. I checked the schematic a few times, everything seems in order. I just can't figure it out.
"Hi there, thank you for watching and commenting on my video. I’m sorry to hear that you are having trouble with the IR remote in Tinkercad simulator. I’m not sure why it is not working for you, but maybe there is a bug or a compatibility issue with the simulator. You can try to contact the Tinkercad support team and report your problem to them. They may be able to help you better than I can. 🧐 I hope you enjoyed the rest of the video and learned something new. Please let me know if you have any other questions or feedback. Thank you for your support and patience." :)
Hi there! I apologize for the inconvenience you're experiencing. It seems that there might be compatibility issues with the new update in Tinkercad affecting the functionality of the IR remote and sensor. I recommend trying out the same circuit in the Wokwi Simulator, as it's known to work seamlessly with the provided code. Let me know if you need any assistance setting it up on Wokwi!
Hello bro, Can you make a project on gesture controlled home automation .... I have the content, of you want i can explain you what to Do.... But the only thing is I don't know coding much so I'm not able to make it... Could you plz try
I completed all connections of ckt, code also completed but in simulation process only voltage value shown, but current value display as 0,why ckt not working
when you started the simulation , why did you remove the wire that links the power supply and the light bulb and then put it back on ? and how did you even do that because i can't modify the circuit while the simulation is still running
The given simulation is perfectly working , and in the video I by mistake forgot to add the wire and after I connect the wire that's why this happens. You can directly access the simulation by link in discription for your understanding and connection checking
![[NEW] ir Remote Control Circuit On / OFF - NO IC](/img/n.gif)
man i was thinking about this project and been tired for couple days try to figure out the program, until i saw yr channel and this project , Thanks a lot Bhai, frm Malaysia, i hv subscribe and like
Thanks a lot brother ❤️ your like gives me motivation to make videos like this. Keep Supporting ✨✌🏻
I m thankful to you , really this video very helpful for tinkercadian ,your video clarify all the process or step .
Thanks for the comment! It's always great to hear feedback. 💫
when you started the simulation , why did you remove the wire that links the power supply and the light bulb and then put it back on ? and how did you even do that because i can't modify the circuit while the simulation is still running
How do u know those: case: 0xFD.....at the end
For some reason remote doesnt work
hello I have a problem even in your simulation link ir remote dont do the job why?
as soon as I start the simulation my Power Supply goes to 0 A (second screen on the power supply), no matter to what voltage I put it on. I checked the schematic a few times, everything seems in order. I just can't figure it out.
You need to check the power connection..
Please give the schematics for operating it on 220v.
change the relay my friend for 220v output and 5vdc input
everything is working, excepting the IR remote...why? even using the link you provide for simulation...remote is not working. why?
is not the first project what I'm trying to use the remote. and is not working... I'm doing something wrong? or the library is not available anymore?
"Hi there, thank you for watching and commenting on my video. I’m sorry to hear that you are having trouble with the IR remote in Tinkercad simulator. I’m not sure why it is not working for you, but maybe there is a bug or a compatibility issue with the simulator. You can try to contact the Tinkercad support team and report your problem to them. They may be able to help you better than I can. 🧐
I hope you enjoyed the rest of the video and learned something new. Please let me know if you have any other questions or feedback. Thank you for your support and patience." :)
What is the code
What's the use of the IR sensor
IR stands for Infrared. It's a sensor that sends and receive the signal that are used for communication.
Heya IR Remote is not working the code given by you. can you help me sir??
Hi there! I apologize for the inconvenience you're experiencing. It seems that there might be compatibility issues with the new update in Tinkercad affecting the functionality of the IR remote and sensor. I recommend trying out the same circuit in the Wokwi Simulator, as it's known to work seamlessly with the provided code. Let me know if you need any assistance setting it up on Wokwi!
what to do if I want to use 230 V supply
You can connect 220v Supply to relay. The Relays Works only As a switch
Excellent 👍 bro
Thanks for the visit
Great brooo
Bro is it the given code in google drive is right?
yes
Which sensor is used in this
Hello bro,
Can you make a project on gesture controlled home automation ....
I have the content, of you want i can explain you what to Do....
But the only thing is I don't know coding much so I'm not able to make it...
Could you plz try
I will try..
@@technicalshubham789 thank you bro
bro remote work aahala yen
In privious version IR remote work fine but in new update of Thinkercad remote not works perfectly. Please go for Wokwi Simulator
good job sir
Thank You :)
🔥
👌👌👍
Please send me the code
I completed all connections of ckt, code also completed but in simulation process only voltage value shown, but current value display as 0,why ckt not working
Please reply me 🙏
great
Pahingi po nang link for simulation. Ty
This fake as the wire connected lastly was during stimulation which is not even possible
6 input 6 output cirkit
I'll make video on that soon...
when you started the simulation , why did you remove the wire that links the power supply and the light bulb and then put it back on ? and how did you even do that because i can't modify the circuit while the simulation is still running
The given simulation is perfectly working , and in the video I by mistake forgot to add the wire and after I connect the wire that's why this happens. You can directly access the simulation by link in discription for your understanding and connection checking
Even the simulator link is also not working