Since you can obviously weld...why not just build the three angled pieces out of 3"x 3" at 3/16" wall instead of 4 x 4 wood. Seems a lot easier and a lot safer (if welded correctly).
I lived in both Devon and Cornwall, in south-west England, where there are granite quarries, who sold off-cuts cheaply by the ton. ...... They cut stone with saws, so there were many thicknesses, plus they chiselled surfaces and shapes, and there were broken pieces, plus the 'extras' made in case of breakage, as well as general waste. ...... Some stones were several hundredweight. ...... I bought some stone-carving chisels from a retired monumental mason, and included was a 4 foot tapered steel bar, designed for moving stones. ...... Worth it's weight in gold!
First time viewing your work. You sure have nothing against hard work. The video work is well done also. Overall a good job well done. I look forward to more of your videos.
That white pipe up about 4 block courses is most likely a buried rainwater drain from the downspouts and not weeping tile as you suggested. Weeping tile, for under-house water drainage is buried at the footings so water will not accumulate and seep into the basement. The drain under the driveway by the garage door may be connected to the weeping tile, but should not be weeping tile in case it gets crushed as you have found. Cheers.
It's fantastic to see you back again! It's been too long, sent you a tweet a month ago so I'm glad you're back. It was good seeing your methodology in this one. I'd have done my back in attempting this. Great build as always. Hope your drainage is all good now.
Interesting gadget made here. I think the failing point was trying to use glue on the 4x4, which is pressure treated and the glue doesn't stick very well. Making it with staggered pieces of regular 2x4 with plywood gusset plates (all glued) might have held the load.
I am surprised you did not attach a lift to the back of your pickup truck, it rolls so you could move it out of the way, then put it back when you were ready.
It is obvious that if someone wants to, they can. Digging up the ground near the foundation of a house is hard work, especially when there are large stones near it. In my opinion, if there is access to the foundation located underground, it should be protected from water penetrating the foundation (tar the foundation and put a barrier made of plastic foil or Styrofoam or some other type), unfortunately, drainage pipes only drain part of the water and the foundations are constantly damp, this moisture passes into the house, and we want to avoid this.
I hope with all of those fancy tools, you're being careful. A come-along is a winch, not a hoist. And why the complex joinery at the top? Seems prone to failure. Still, I'm impressed by your effort.
Took too many risks in that video, remember the only tool you can't replace is you... Huge block of stone dangling from an under powered winch and you are stood underneath in pumps... Apart from renting one, A better design would have used a single HD pin with a with a few quick links attached between the legs, triple the winch wire up on a few snap blocks and get a mate to help.
...FYI: you should have someone fabricate, and weld up the "top bracket/head assembly",... instead of using chunks of wood, with glue and screws!.... how much trust do you have in that assembly??!!...
Refreshing to see a project done without $25,000 dollars worth of Festool gear and some good old fashion ingenuity.
Caveman method got it done! I see good engineering. Those are some big damn rocks to be wrangling around by yourself! Good job!
“Got it done like a caveman but I got it done.”
I’m going to be using that line😂
Thanks
The marvellous ingenuity of man. Job well done!
The only way we can succeed is to never give up. Awesome job. Thank you
Since you can obviously weld...why not just build the three angled pieces out of 3"x 3" at 3/16" wall instead of 4 x 4 wood. Seems a lot easier and a lot safer (if welded correctly).
He's a purist
I lived in both Devon and Cornwall, in south-west England, where there are granite quarries, who sold off-cuts cheaply by the ton. ...... They cut stone with saws, so there were many thicknesses, plus they chiselled surfaces and shapes, and there were broken pieces, plus the 'extras' made in case of breakage, as well as general waste. ...... Some stones were several hundredweight. ...... I bought some stone-carving chisels from a retired monumental mason, and included was a 4 foot tapered steel bar, designed for moving stones. ...... Worth it's weight in gold!
Music to my ears to hear your voice again.
First time viewing your work. You sure have nothing against hard work. The video work is well done also. Overall a good job well done. I look forward to more of your videos.
That white pipe up about 4 block courses is most likely a buried rainwater drain from the downspouts and not weeping tile as you suggested. Weeping tile, for under-house water drainage is buried at the footings so water will not accumulate and seep into the basement. The drain under the driveway by the garage door may be connected to the weeping tile, but should not be weeping tile in case it gets crushed as you have found. Cheers.
holy crap, you are alive
😀 I have to jump in too! Super glad to see you again!
Oww I got a cramp. Getting old sucks .... But the alternative isn't much better.
It's fantastic to see you back again! It's been too long, sent you a tweet a month ago so I'm glad you're back. It was good seeing your methodology in this one. I'd have done my back in attempting this. Great build as always. Hope your drainage is all good now.
Nicely done! I'm wondering where all the videos are, of women doing the same type of job.
Some of us do try, but we screw up way worse than what the intro shows here.
Interesting gadget made here. I think the failing point was trying to use glue on the 4x4, which is pressure treated and the glue doesn't stick very well. Making it with staggered pieces of regular 2x4 with plywood gusset plates (all glued) might have held the load.
It Lives!!
Good to have ya back makin videos bud... this looked like a lot more work than I’m willin to do myself... I guess I’m a wimp...lol
Welcome back
Glad you’re back!!! Missed your content
Welcome Back!
I'm so happy to see you!
Welcome back!
Nice to see you back, missed your videos
Great to see you again. Your videos are always great. Love your work.
Glad to see you back, you’ve made some awesome videos over the years.
Welcome bloody back sir guru
: ) Don't you love *Playing with Blocks and Beach Toys?* You build a Fine Castle! Cheers! ~- *
15:20, that leg on the sloping ply behind you ? Does it want to skid off ?
I took a double take when I saw a new GuruBrew video in my subscription feed. Good to see you are doing well. I was getting worried :) Welcome Back :)
I am surprised you did not attach a lift to the back of your pickup truck, it rolls so you could move it out of the way, then put it back when you were ready.
nicely done, boss. Your patience and cool head are inspiring.
I was just thinking about you yesterday. I was wondering if you left the TH-cam community?
Glad to your back!
I’m in ah I had no idea Ryobi made a at home Bridgeport lol still wanna get me one of those portable drill press(ers) never remember though haha
Impressive!
I am supposed to be working, but I find myself sneakily watching a cool DIY job instead.
I hope my boss is not monitoring this computer!
Nice one!
great idea A+++
Someone likes Aldi!
That was impressive 👏
Good job fella 👍
Awesome job!
Seems like adjustable length legs would be helpful.
Damn glad to see you back man! Was worried bout ya!
It is obvious that if someone wants to, they can.
Digging up the ground near the foundation of a house is hard work, especially when there are large stones near it. In my opinion, if there is access to the foundation located underground, it should be protected from water penetrating the foundation (tar the foundation and put a barrier made of plastic foil or Styrofoam or some other type), unfortunately, drainage pipes only drain part of the water and the foundations are constantly damp, this moisture passes into the house, and we want to avoid this.
Next time... skip the top blocks. Run a chain around the top.... one bolt through the link and each vertical member. Done!
WOW where the hell have you been? It's good to see your posting a video.
Amazing I would like to build and do this also
I like very much yes
Excellent work. But I was worried about the wood glue on the lifting device. And as I am writing that I see it broke on you...🙄
Bad ass
Done like a caveman? You've just explained how the pyramids in Egypt got built!
I hope with all of those fancy tools, you're being careful. A come-along is a winch, not a hoist. And why the complex joinery at the top? Seems prone to failure. Still, I'm impressed by your effort.
👍
Man that’s dark coffee, lol.
Took too many risks in that video, remember the only tool you can't replace is you... Huge block of stone dangling from an under powered winch and you are stood underneath in pumps... Apart from renting one, A better design would have used a single HD pin with a with a few quick links attached between the legs, triple the winch wire up on a few snap blocks and get a mate to help.
Rent a mini excavator?
Just respect for you, struggling alone. But, you did not quit or whimper or ask God why this or why that.
dude, cut .5 degree over measurement in future, you will thank me
Looks dangerous
...FYI: you should have someone fabricate, and weld up the "top bracket/head assembly",... instead of using chunks of wood, with glue and screws!.... how much trust do you have in that assembly??!!...
It’s a ploy to get his wife to let him get a welder! Ha!
Oh! He’s already got a welder!
Good job sir!
Damn bro what’s that circular saw from……1972?
I thought that myself
We can't all afford a shiny new tool
Welcome back!
Impressive!